Ergon GC1 BIOKORK Bicycle Grips Instruction Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your Ergon GC1 BIOKORK bicycle grips. The Ergon GC1 grips are designed for ergonomic comfort on bicycles with swept-back handlebars, utilizing certified toxin-free and UV-stable rubber compounds and a cork-based material for enhanced feel and support.

Konec produktuview

The Ergon GC1 BIOKORK grips are engineered to provide optimal hand positioning and pressure distribution, particularly for city, touring, and Holland bikes with handlebars that sweep backward. Their unique design aims to reduce hand fatigue and numbness during rides.

• Ergonomický design: Specifically shaped for handlebars with a significant backward sweep, promoting a natural wrist position.
• Materiálové složení: Made from certified toxin-free and UV-stable rubber compounds, combined with a cork material (BIOKORK) for a natural feel and reduced plastic content.
• Bezpečná Clamping: Features a 100% recyclable aluminum clamp for secure attachment to the handlebar.
• Reduced Plastic: The central core uses 40% less plastic, contributing to environmental sustainability.

Nastavení a instalace

Proper installation of your Ergon GC1 grips is crucial for optimal performance and comfort. Follow these steps carefully:

1. Příprava řídítek:

   Remove existing grips from your bicycle handlebar. If old grips are difficult to remove, a small amount of rubbing alcohol or a heat gun (used carefully) can assist in loosening them. Ensure the handlebar surface is clean and dry before proceeding.

2. Loosen Handlebar Components:

   Uvolněte třamps for your brake levers, shifters, and any other handlebar-mounted accessories. Slide these components inwards, away from the ends of the handlebar, to create space for the new grips.
3. Nainstalujte úchyty:

   Slide the Ergon GC1 grips onto the handlebar ends. Ensure the ergonomic palm rest is oriented correctly to support your hand in a natural, comfortable position when riding. The grips are designed for handlebars with a backward sweep, so align them accordingly.

4. Upravit pozici:

   Once the grips are in place, sit on your bicycle and adjust their rotational angle. Your wrists should be straight, and your hands should rest comfortably on the palm support without excessive pressure points. This may require slight adjustments to the grip angle and the position of your brake levers and shifters.

5. Utáhněte Clamps:

   Using an appropriate hex key, tighten the aluminum clamp bolts on each grip. The recommended torque specification is typically marked on the clamp (e.g., 5 Nm). Neutahujte příliš, as this can damage the handlebar or the grip. If you have a torque wrench, use it to ensure precise tightening.
6. Reposition Accessories:

   Slide your brake levers, shifters, and other accessories back into their desired positions, snug against the new grips. Tighten their clamps securely, ensuring they are easily accessible and functional.

Návod k obsluze

Once installed, the Ergon GC1 grips require no special operation. Their primary function is to provide an ergonomically optimized contact point between your hands and the bicycle.

• Umístění ruky: Rest your palms fully on the broad support surface of the grips. This distributes pressure over a larger area, reducing strain on nerves and tendons in your hands and wrists.
• Pravidelné kontroly: Periodically check that the grips remain securely fastened to the handlebar. If any movement is detected, re-tighten the clamp bolts to the specified torque.

Údržba

To ensure the longevity and performance of your Ergon GC1 BIOKORK grips, follow these simple maintenance guidelines:

• Čištění: Clean the grips with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the rubber and cork materials.
• Inspekce: Regularly inspect the grips for any signs of wear, cracks, or damage. While the materials are UV-stable, prolonged exposure to extreme weather conditions can affect their lifespan.
• Clamp Zabezpečení: Check the tightness of the aluminum clamp bolts periodically, especially after the first few rides and after any significant temperature changes.
• Skladování: Store your bicycle in a cool, dry place away from direct sunlight when not in use to help preserve the grip materials.

Odstraňování problémů

Specifikace

Záruka a podpora

The Ergon GC1 BIOKORK grips come with a Omezená záruka. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Ergon website or contact Ergon customer support directly.

For further assistance, technical support, or to inquire about replacement parts, please visit the official Ergon webnebo kontaktujte jejich oddělení zákaznických služeb.

Visit the Ergon Store on Amazon pro více informací o produktu a zdroje podpory.