OSMO 2K Wood Oil with Hardener Instruction Manual

1. Konec produktuview

The OSMO 2K Wood Oil is a high-quality, solvent-free, two-component natural oil designed for interior wood surfaces. It provides a matte finish and is suitable for wooden flooring, stairs, and furniture. This product includes both the oil and a hardener, formulated for a single-coat application.

Klíčové vlastnosti:

• Solvent-free formulation
• Matný povrch
• Two-component system (oil and hardener)
• Jednosložková aplikace
• Rychlé schnutí
• Natural oil-based
• Supports a healthy living environment (No VOCs)
• Určeno pro komerční použití

Image 1.1: OSMO 2K Wood Oil and Hardener packaging. The main can of 2K Wood Oil is shown with the smaller bottle of Hardener for 2K Wood-Oil 6633 placed on top. Labels indicate "Professional Product" and "No VOCs".

2. Bezpečnostní informace

Always read and follow all safety instructions and warnings provided on the product packaging before use. Ensure adequate ventilation during application and drying. Wear appropriate personal protective equipment, including gloves and eye protection. Keep out of reach of children and pets. Dispose of waste materials according to local regulations.

Právní prohlášení: Prohlášení týkající se doplňků stravy nebyla hodnocena Úřadem pro kontrolu potravin a léčiv (FDA) a nejsou určena k diagnostice, léčbě, vyléčení ani prevenci jakékoli nemoci nebo zdravotního stavu. Tento produkt není doplňkem stravy.

3. Příprava a instalace povrchu

1. Čištění povrchu: Ensure the wood surface is clean, dry, and free from dirt, dust, grease, wax, and old finishes. Any previous coatings must be completely removed.
2. Broušení: Sand the wood surface thoroughly. The final sanding grit should be appropriate for the wood type and desired finish. Remove all sanding dust before application.
3. Teplota: Apply in a well-ventilated area with ambient and surface temperatures between 18°C and 25°C (64°F and 77°F).

4. Pokyny pro aplikaci

1. Míchání: The OSMO 2K Wood Oil is a two-component system. Mix the oil and hardener thoroughly in an 8:1 ratio (8 parts oil to 1 part hardener) immediately before use. Once mixed, the pot time is approximately 3-4 hours. Only mix the amount that can be applied within this timeframe.
2. Způsob aplikace: Apply a thin, even coat of the mixed oil using a scraper or a roller. Ensure uniform coverage across the entire surface.
3. Doba setrvání: Allow the applied oil to sit on the surface for 20-40 minutes. This allows the oil to penetrate the wood fibers.
4. Leštění: After the dwell time, buff off any excess oil thoroughly using a clean, lint-free cloth or a buffing machine with a white pad. Ensure no puddles or thick spots remain on the surface. The surface should appear evenly saturated but not wet.

5. Drying and Cure Time

• Pot Time: Once mixed, the product has a working time of 3-4 hours.
• Doba vyléčení: The treated surface will be fully cured and ready for use after 24 hours. Avoid heavy traffic or placing objects on the surface during this period.

6. Coverage Rate

The approximate coverage rates are as follows:

• 0.375 liter: Approximately 140 square feet
• 1.0 liter: Approximately 430 square feet

Actual coverage may vary depending on wood type, porosity, and application method.

7. Údržba

To maintain the finish, regularly clean the surface with a damp cloth and a mild, pH-neutral cleaner specifically designed for oiled wood surfaces. Avoid harsh chemicals or abrasive cleaners. Re-oiling may be necessary periodically depending on wear and tear. Consult the manufacturer's recommendations for long-term care products.

8. Řešení problémů

• Nerovnoměrný povrch: This can occur if excess oil was not thoroughly buffed off or if the application was uneven. Ensure consistent application and thorough buffing.
• Pomalé schnutí: Insufficient ventilation, low temperatures, or high humidity can prolong drying times. Ensure proper ventilation and recommended environmental conditions.
• Sticky Surface: Too much oil left on the surface after buffing can result in a sticky finish. Re-buff the area with a clean cloth to remove excess.

9. Specifikace

10. Záruka a podpora

Specific warranty information for the OSMO 2K Wood Oil is not provided in the product details. For warranty claims, technical support, or further inquiries, please contact the manufacturer, OSMO, or the retailer where the product was purchased. Refer to the product packaging for contact details.

11. Oficiální produktová videa

No official product videos from the seller are available in the provided product information. For visual guides or demonstrations, please check the manufacturer's official webwebu nebo autorizovaných kanálů.