1. Konec produktuview
The suptek MD01A Gas Spring Monitor Arm is designed to enhance your workspace ergonomics and free up desk space. This monitor arm offers full flexibility, allowing you to adjust your monitor's height, tilt, swivel, and rotation for optimal viewpohodlí.
- Ergonomický design: Helps achieve a healthier working posture by allowing easy adjustment of monitor height up to 45 cm and horizontal extension up to 49.3 cm.
- Stabilní struktura: Features a gas spring mechanism for smooth, silent adjustments, made from high-strength steel and aluminum for durability and scratch resistance.
- Space Saving & Cable Management: Integrated cable management system keeps your workspace tidy and clutter-free.
- Univerzální kompatibilita: Supports LED/LCD monitors from 13 to 32 inches, weighing between 2-9 kg, with VESA mounting patterns of 75x75 mm and 100x100 mm.
Image 1.1: Product dimensions showing load capacity (2-9kg), VESA patterns (75x75/100x100mm), screen size (13"-32"), and height/extension ranges.
Image 1.2: Illustration of the monitor arm's full adjustability, including tilt (±90°), swivel (±180°), and 360° rotation.
Video 1.3: Stručná úvodní informaceview demonstrating the general functionality and adjustability of the monitor arm.
2. Bezpečnostní informace
Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage.
- Ensure your monitor's weight and VESA pattern are within the specified limits (13-32 inches, 2-9 kg, VESA 75x75/100x100 mm).
- Do not overtighten screws during installation to avoid damaging the product or your desk.
- Udržujte děti a domácí zvířata mimo dosah místa instalace.
- Always adjust the gas spring tension carefully to match your monitor's weight.
- Pokud máte jakékoli pochybnosti o instalaci, poraďte se s kvalifikovaným odborníkem.
3. Obsah balení
Verify that all components are present and undamaged before proceeding with installation. The package typically includes:
- Sestava ramene monitoru
- Stůl Clamp Báze
- Základna pro montáž na průchodku
- Deska VESA
- Hardware Kit (screws, washers, spacers)
- Allen Keys for adjustment
- Návod k použití
4. Nastavení a instalace
The suptek MD01A monitor arm offers two installation methods: C-clamp and Grommet Mount.
Image 4.1: Visual representation of the C-clamp and Grommet Mount options for desk attachment. Both support desk thickness from 10-70mm, with grommet hole diameter from 10-60mm.
4.1. Vyberte si způsob montáže
C-Clamp Instalace:
- Připojte C-clamp base to the edge of your desk. Ensure the desk thickness is between 10-70mm.
- Utáhněte třamp securely using the knob until the base is stable.
Montáž průchodky:
- Insert the grommet base through an existing hole in your desk (diameter 10-60mm). Ensure the desk thickness is between 10-70mm.
- Zajistěte základnu zespodu stolu pomocí dodané desky a matice.
Obrázek 4.2: Detailní view z C-clamp attachment method, suitable for desk thicknesses of 10-70mm.
Obrázek 4.3: Detailní view of the Grommet mount attachment method, for desk thicknesses of 10-70mm and hole diameters of 10-60mm.
4.2. Attach VESA Plate to Monitor and Assemble Arm
- Opatrně položte monitor displejem dolů na měkký, čistý povrch.
- Zarovnejte desku VESA s montážními otvory na zadní straně monitoru (75x75 mm nebo 100x100 mm).
- Připevněte desku VESA k monitoru pomocí příslušných šroubů a podložek ze sady hardwaru. Nepřetahujte.
- Insert the lower arm into the desk mount base.
- Připojte horní rameno k dolnímu rameni.
- Slide the monitor (with VESA plate attached) onto the end of the monitor arm. Ensure it clicks securely into place.
Image 4.4: A three-step visual guide illustrating the quick and easy installation process: fixing the clamp, assembling the arm, and connecting the monitor.
5. Pokyny k obsluze a nastavení
The suptek MD01A monitor arm offers various adjustments for optimal viewIng.
5.1. Nastavení napětí plynové pružiny
The gas spring tension must be adjusted to match your monitor's weight for proper function. Use the provided Allen key.
- If the arm falls down: Turn the inside screw counter-clockwise (towards the "+" direction) to increase gas spring tension until the arm can stay as intended.
- If the arm rises up or cannot be pressed down: Turn the inside screw clockwise (towards the "-" direction) to decrease gas spring tension until the arm can stay as intended.
Poznámka: Ensure the arm is in a horizontal position during adjustment.
Image 5.1.1: Diagram showing how to adjust the gas spring tension using an Allen key to prevent the arm from falling or rising unintentionally.
Image 5.1.2: Detailed illustration of the gas spring adjustment mechanism, highlighting the plus and minus directions for increasing nebo dekretasinnapětí g.
5.2. Tilt Angle, Swivel, and Rotation Adjustment
To adjust the tilt angle of your monitor:
- Loosen the tilting bolt on the VESA plate using an Allen key.
- Adjust the monitor to your desired tilt angle. It's easier to adjust if you grab the top and bottom of the screen.
- Retighten the tilting bolt to fix the intended angle. Do not let go of the screen before locking the screw to prevent rebound.
- Nastavení výšky: Gently push or pull the monitor up or down. The gas spring will assist in holding the position.
- Otočný: Rotate the monitor arm horizontally at the joints to change the viewsměr.
- Otáčení: Otočte monitor o 360 stupňů z orientace na šířku do orientace na výšku.
Image 5.2.1: Technical diagrams illustrating the monitor arm's tilt (±90°), swivel (±90°), and 360° rotation capabilities.
6. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon ramene vašeho monitoru.
- Čištění: Otřete paži měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Zkontrolujte připojení: Periodically check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
- Plynová pružina: Pokud se pohyb ramene časem stane tuhým nebo volným, upravte napětí plynové pružiny podle popisu v části 5.1.
7. Řešení problémů
Zde jsou řešení běžných problémů, se kterými se můžete setkat:
| Problém | Řešení |
|---|---|
| Monitor arm falls down or cannot hold position. | The gas spring tension is too low. Turn the inside screw counter-clockwise (towards "+") to increase tension. Refer to Section 5.1. |
| Monitor arm rises up or cannot be pressed down. | The gas spring tension is too high. Turn the inside screw clockwise (towards "-") to decrease tension. Refer to Section 5.1. |
| Gap at the joint of the arm. | Tighten the nut at the joint using the provided Allen key until the gap is closed and the joint rotates smoothly. |
| Cannot insert the Allen key into the gas spring adjustment hole. | Press the upper arm down firmly until the tilting bolt is fully exposed, then insert the hex wrench. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | MD01A |
| Značka | suptek |
| Kompatibilní velikost obrazovky | 13 - 32 palce |
| Kapacita zatížení | 2 - 9 kg |
| Kompatibilita VESA | 75x75 mm, 100x100 mm |
| Typ montáže | Stůl Clamp, Průchodkový držák |
| Typ pohybu | Articulating (Tilt, Swivel, Rotation) |
| Úhel náklonu | ±90° |
| Otáčení | 360° |
| Materiál | Legovaná ocel |
| Stůl Clamp Tloušťka | 10 - 70 mm |
| Průměr otvoru průchodky | 10 - 60 mm |
9. Záruka a podpora
For warranty information, technical support, or to purchase replacement parts, please refer to the official suptek webnebo se obraťte na prodejce. Uschovejte si doklad o koupi pro případ reklamace.