1. Důležité bezpečnostní informace
Read and understand all instructions in this manual before installing, operating, or servicing this appliance. Failure to follow these instructions may result in fire, explosion, property damage, personal injury, or loss of life.
- This appliance is for use with Natural Gas or Liquid Propane only. Verify your gas supply type before installation.
- Neskladujte ani nepoužívejte benzín nebo jiné hořlavé výpary a kapaliny v blízkosti tohoto ani jiného spotřebiče.
- Instalaci a servis musí provádět kvalifikovaný instalační technik, servisní agentura nebo dodavatel plynu.
- Proper ventilation is crucial. This is a ventless appliance, but adequate room air must be available for combustion.
- Udržujte děti a domácí zvířata mimo dosah spotřebiče, když je v provozu.
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or gas supplier.
2. Konec produktuview
The Duluth Forge DLS-24R-2 is a 24-inch dual fuel ventless fireplace log set designed to provide supplemental heat for indoor spaces. It features patented dual fuel technology, allowing operation with either natural gas or liquid propane. The unit includes a remote control for convenient operation and an Oxygen Depletion Sensor (ODS) for safety.
Image 2.1: The Duluth Forge DLS-24R-2 log set in operation, displaying realistic flames and glowing embers.
Klíčové vlastnosti:
- Dual Fuel Technology: Operates on Natural Gas or Liquid Propane.
- Tepelný výkon: 33,000 BTU, capable of heating up to 1,300 sq. ft.
- Dálkové ovládání: Thermostatic remote for temperature control and on/off functions.
- Realistický design: 8 hand-painted ceramic logs with an ember burner chassis for a lifelike appearance.
- Zajištění bezpečnosti: Equipped with a Safety Pilot O.D.S. (Oxygen Depletion Sensor) and battery-assisted Piezo ignition.
3. Nastavení a instalace
3.1 Kontrolní seznam před instalací
- Ensure the appliance is installed in a masonry or agency-approved firebox.
- Verify minimum firebox dimensions: 20" H x 28" W (front) / 23" W (rear) x 15" D.
- Confirm gas supply type (Natural Gas or Liquid Propane) matches the appliance settings.
- Gather necessary tools for installation (e.g., wrenches, pipe sealant).
3.2 Vybalení a identifikace součástí
Carefully unpack all components and inspect for any damage. The package should include:
- Gas Burner Chassis with Grate
- 8 Hand-Painted Ceramic Logs
- Pytel uhlíků
- Dálkové ovládání
- Schránka přijímače
- AA & AAA Batteries (for remote and ignition)
- Hardwarový balíček
- Damper Clamp
Obrázek 3.1: Konecview of the main components included with the log set, such as the gas burner, logs, remote, and ODS.
3.3 Připojení plynu
- Position the burner chassis inside the firebox.
- Connect the gas supply line to the appliance's inlet. Use appropriate pipe sealant on all threaded connections.
- Perform a leak test on all gas connections using a soap solution. Bubbles indicate a leak. Tighten connections as needed and retest.
- Ujistěte se, že damper třamp is installed to prevent accidental closure of the fireplace dampehm.
3.4 Umístění klád
Carefully arrange the 8 ceramic logs on the grate according to the provided log placement diagram (refer to the separate diagram included in your packaging). Proper log placement is essential for safe and efficient operation, ensuring flames are not impinged and airflow is maintained.
Image 3.2: The 8 hand-painted ceramic logs correctly arranged on the burner grate before operation.
3.5 Instalace baterie
- Install 4 AA batteries into the receiver box.
- Vložte 2 baterie AAA do dálkového ovladače.
- Install 1 AAA battery for the Piezo ignition system.
4. Návod k obsluze
4.1 Počáteční spuštění
Before first use, ensure all gas connections are secure and leak-free. Allow a qualified technician to perform the initial startup if you are unsure.
4.2 Obsluha dálkového ovladače
The remote control allows for convenient operation of your log set. It features ON, OFF, MODE, and SET buttons, along with an LCD screen displaying temperature and mode.
Image 4.1: The remote control unit for the Duluth Forge DLS-24R-2, showing its display and control buttons.
- Zapínání: Stiskněte tlačítko ON button. The Piezo ignition will spark, and the pilot light will ignite, followed by the main burner.
- Vypínání: Stiskněte tlačítko VYPNUTO button to extinguish the main burner and pilot light.
- Výběr režimu: Stiskněte tlačítko MODE button to toggle between Manual and Thermostat modes.
- Temperature Setting (Thermostat Mode): In Thermostat mode, use the SOUBOR button and arrow keys (if available on your remote model) to adjust the desired room temperature. The unit will cycle on and off to maintain this temperature.
- LCD displej: Shows current room temperature (°F or °C), burner status (On/Off), and selected mode.
4.3 Ruční provoz
In Manual mode, the log set will operate continuously at its set heat output until manually turned off. There is no temperature regulation in this mode.
5. Údržba
Regular maintenance ensures safe and efficient operation of your log set.
5.1 Obecné čištění
- Ensure the appliance is completely cool before cleaning.
- Use a soft, dry cloth to wipe down the logs and chassis. Do not use abrasive cleaners or solvents.
- Periodically vacuum around the burner and pilot assembly to remove dust and debris.
5.2 Log Inspection
Inspect the ceramic logs periodically for any signs of cracking or deterioration. If a log is damaged, replace it with an authentic Duluth Forge replacement log to maintain safety and performance.
5.3 Pilot Light and Burner Maintenance
The pilot light and burner ports should be kept clean. Any blockage can affect performance and safety. If you notice irregular flame patterns or difficulty igniting, consult a qualified service technician.
5.4 Výměna baterie
Replace batteries in the remote control and receiver box annually, or when the remote's display becomes dim or the unit becomes unresponsive.
6. Řešení problémů
This section addresses common issues you might encounter with your Duluth Forge log set.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Pilot light will not ignite or stay lit. | No gas supply; ODS activated; thermocouple issue; dirty pilot assembly; low battery for ignition. | Check gas valve; ensure adequate ventilation; clean pilot assembly; replace ignition battery; consult technician if ODS or thermocouple issue persists. |
| Hlavní hořák se nezapálí. | Pilot light not lit; gas valve closed; remote control issue; receiver box issue. | Ensure pilot is lit; open gas valve fully; check remote batteries; replace receiver box batteries. |
| Dálkové ovládání nereaguje. | Dead batteries in remote or receiver; remote out of range; interference. | Replace all batteries; move closer to unit; remove obstructions. |
| Jednotka se neočekávaně vypne. | ODS activation due to low oxygen; thermostat setting reached (if in Thermostat mode); gas supply interruption. | Increase ventilation; check thermostat setting; verify gas supply. |
| Neobvyklé pachy. | Initial burn-off of manufacturing oils; dust accumulation; gas leak. | Ensure good ventilation during initial use; clean unit; if gas odor persists, shut off gas and call service immediately. |
If troubleshooting steps do not resolve the issue, contact a qualified service technician or the manufacturer for assistance.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Název modelu | DLS-24R-2 |
| Značka | Duluth Forge |
| Zdroj napájení | Gas Powered (Natural Gas or Liquid Propane) |
| Tepelný výkon | 10 000 britských tepelných jednotek (BTU) |
| Pokrytí topení | Až 1,300 čtverečních stop |
| Rozměry produktu (přibližně) | 26.5"H x 14.5"Š x 16.5"V |
| Hmotnost položky | 49.4 libry |
| Materiál | Ceramic Logs, Powder Coated Chassis |
| Typ ventilace | Odvzdušněte zdarma |
| Speciální funkce | Remote Control, Oxygen Depletion Sensor (ODS) |
| UPC | 815192023948 |
Image 7.1: Diagram illustrating the key dimensions of the Duluth Forge DLS-24R-2 log set.
8. Informace o záruce
This Duluth Forge product comes with a Omezená záruka. For specific details regarding the terms, conditions, and duration of your warranty, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your proof of purchase for warranty claims.
9. Zákaznická podpora
For technical assistance, replacement parts, or any questions regarding your Duluth Forge DLS-24R-2 log set, please contact the manufacturer, Factory Buys Direct.
- Výrobce: Tovární nákupy přímo
- Refer to the contact information provided in your product packaging or visit the official Duluth Forge webweb s nejaktuálnějšími informacemi o podpoře.
When contacting support, please have your model number (DLS-24R-2) and proof of purchase readily available.