Uživatelská příručka k nabíjecímu kabelu pro elektromobily dépow 7.4 kW typu 2 CEE

1. Úvod

This manual provides essential instructions for the safe and efficient use of your dépow 7.4kW Type 2 CEE Electric Car Charging Cable. Please read this manual thoroughly before operating the device and retain it for future reference.

1.1 Klíčové vlastnosti

• Mobile Wallbox Functionality: Operates as a 7.4kW mobile wallbox without requiring permanent installation.
• Rychlé nabíjení: Delivers up to 7.4kW (230V x 32A) charging power, significantly faster than standard domestic Schuko outlets.
• Nastavitelný proud: User-selectable current settings (6A, 10A, 16A, 20A, 24A, 32A) to suit various power sources and charging needs.
• Integrated LCD Control: Digital display for monitoring charging status, power, current, and setting delays.
• Všestranná konektivita: Equipped with a Type 2 connector for electric vehicles and a CEE 32A plug for power input, including a Schuko adapter for broader compatibility.
• Odolný design: IP66 rated control box and IP54 rated Type 2 plug for protection against dust and water.

1.2 Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• dépow 7.4kW EV Charging Cable (Type 2 to CEE 32A)
• Adaptér Schuko
• Waterproof Carrying Bag
• Handle Strap for Cable Management
• Mikrovlákna čistící hadřík
• Wall Mounting Bracket (for control box)
• Plug Holder (for Type 2 connector)

2. Bezpečnostní informace

Always adhere to the following safety guidelines to prevent injury or damage to the product and vehicle.

• Před použitím si přečtěte všechny pokyny.
• Nepoužívejte nabíjecí kabel, pokud se jeví poškozený, roztřepený nebo má odkryté vodiče.
• Ensure the power outlet is properly grounded and rated for the current drawn by the charger.
• Avoid submerging the control box or connectors in water, despite their water-resistant ratings.
• Během provozu držte děti a domácí zvířata mimo dosah nabíjecí oblasti.
• Do not attempt to open or repair the charging unit. Contact qualified personnel for service.
• Operate the charger within the specified temperature range of -25°C to 50°C.

2.1 Integrated Protection Features

The dépow charging cable incorporates multiple safety mechanisms:

• Nadproudová ochrana
• Under/Overvoltage Ochrana
• Ochrana proti úniku
• Ochrana proti přehřátí
• Ochrana proti zemnímu zkratu
• Ochrana proti zkratu

3. Nastavení a instalace

The dépow 7.4kW charging cable is designed for ease of use with existing CEE 32A outlets, requiring no complex installation.

3.1 Connecting to Power Source

1. CEE 32A Connection: Locate a compatible CEE 32A (P17) socket. Ensure the socket is clean and free from debris. Insert the CEE 32A plug of the charging cable firmly into the socket.
2. Schuko Adapter (Optional): If a CEE 32A socket is not available, you can use the provided Schuko adapter. Connect the CEE 32A plug to the adapter, then plug the adapter into a standard Schuko household outlet. Note that charging speed will be limited when using a Schuko adapter.

3.2 Montáž na stěnu (volitelné)

The included wall mounting bracket allows for a semi-permanent installation of the control box, providing a dedicated charging point.

1. Select a suitable location near your CEE 32A outlet, ensuring it is protected from direct impact and within reach of your vehicle.
2. Use appropriate fasteners (not included) to securely mount the bracket to the wall.
3. Slide the control box onto the mounted bracket.
4. Utilize the plug holder to keep the Type 2 connector tidy when not in use.

4. Návod k obsluze

Follow these steps to charge your electric vehicle using the dépow charging cable.

4.1 Postup nabíjení

1. Připojení k napájení: Ensure the CEE 32A plug (or Schuko adapter) is securely connected to the power outlet. The LCD on the control box will illuminate.
2. Set Current and Delay (Optional):
   • Press the 'A' button (Current) once to cycle through available current settings (6A, 10A, 16A, 20A, 24A, 32A). Select the desired charging current.
   • Press the 'L' button (Time) once to set a delayed start time for charging (0.5 to 8 hours). Press and hold for 3 seconds to reset.
3. Připojení k vozidlu: Insert the Type 2 connector firmly into your vehicle's charging port.
4. Zahájit nabíjení: The charging process will begin automatically. The LCD will display real-time charging information.

Důležitá poznámka: It is not possible to modify all settings (e.g., current) after the Type 2 connector has been plugged into the vehicle's charging port. Make any desired adjustments before connecting to the car.

4.2 Informace na LCD displeji

LCD displej poskytuje následující informace:

• Vehicle Connection Icon: Indicates if the charger is connected to the vehicle.
• Ikona chyby: Displays if an error occurs.
• Real-time Power (kW): Aktuální nabíjecí výkon.
• Charged Capacity (kWh): Total energy delivered.
• Časovač zpoždění: Shows remaining time if delayed charging is set.
• Charging Cycle Icon: Visual representation of charging progress.
• Selected Current (A): The currently active charging current.
• Real-time Current/Voltage: Displays live electrical parameters.

4.3 Charging Speed Comparison

5. Údržba

Proper maintenance ensures the longevity and optimal performance of your charging cable.

• Čištění: Use the provided microfiber cloth to gently wipe the control box and cables. Do not use harsh chemicals or abrasive materials. Ensure all connectors are dry before use.
• Skladování: When not in use, store the charging cable in the waterproof carrying bag. This protects it from dust, moisture, and physical damage. The compact design allows for easy storage in your vehicle's trunk.
• Inspekce: Regularly inspect the cable, plugs, and control box for any signs of wear, damage, or corrosion. If any damage is found, discontinue use immediately and contact customer support.
• Správa kabelů: Use the handle strap to coil the cable neatly, preventing kinks and tangles that could lead to damage.

6. Řešení problémů

If you encounter issues with your dépow charging cable, refer to the following common problems and solutions.

6.1 Běžné problémy

• Charger Not Activating:
  • Ensure the CEE 32A plug (or Schuko adapter) is fully inserted into the power outlet.
  • Check if the power outlet is live and functioning correctly.
  • Verify that the Type 2 connector is securely plugged into the vehicle's charging port.
• Pomalá rychlost nabíjení:
  • Confirm the selected current setting on the LCD. Adjust to a higher amperage if your power source and vehicle support it.
  • If using the Schuko adapter, charging speed will be limited to a maximum of 3.68kW.
  • Ensure your vehicle's onboard charger can accept 7.4kW. The final charging power is determined by the lower of the EV's maximum AC charging power and the wallbox/EV charger's power.
• Chybová zpráva na LCD displeji:
  • Note the specific error code displayed.
  • Disconnect the charger from both the power source and the vehicle. Wait a few minutes, then reconnect.
  • If the error persists, consult the detailed error code section (if available in future updates) or contact customer support.

7. Specifikace

8. Záruka a podpora

dépow products are manufactured to high-quality standards. For any questions, technical assistance, or warranty claims, please contact our customer support team. Our support team is always available to assist you with product inquiries and troubleshooting.

Konkrétní záruční podmínky naleznete v dokumentaci k nákupu.