Zavedení
This instruction manual provides detailed guidance for the Dragonhawk X3 Wireless Tattoo Gun Kit. Designed for both beginners and experienced artists, this rotary machine offers stable performance for various tattooing styles, including lining and shading. Please read this manual thoroughly before use to ensure proper operation, safety, and longevity of your device.
Obrázek: Overview of the Dragonhawk X3 Wireless Tattoo Gun Kit, highlighting its sleek design.
Obsah sady
Your Dragonhawk X3 Wireless Tattoo Gun Kit includes the following components:
- 1 x Dragonhawk X3 Wireless Rotary Tattoo Pen Machine
- 10 x Professional Cartridge Needles (5pcs 1205RL Round Liner, 5pcs 1205M Magnum)
- 2 x Black Tattoo Inks
- 1 x Cvičný skin
- 1 x USB nabíjecí kabel typu C
- Multiple Ink Cups
- 1 x Dvojice rukavic
- 1 x Roll of Gauze Tape
Image: All components included in the Dragonhawk X3 Wireless Tattoo Gun Kit, laid out for inspection.
Image: Individually packaged and disinfected ink cups, ensuring hygiene.
Pokyny pro nastavení
- Nabijte zařízení: Before first use, fully charge the tattoo pen using the provided USB Type-C charging cable. The display will indicate charging status.
- Install Cartridge Needle: Gently push the desired cartridge needle into the front end of the tattoo pen until it clicks securely into place. Ensure it is firmly seated.
- Zapnutí/vypnutí: Press and hold the power button (center button) on the top of the pen to turn the device on or off. The digital display will illuminate.
- Upravit svtage: Use the '+' and '-' buttons on the top of the pen to adjust the voltagE. Voltage is adjustable from 5V to 12V in 0.1V increments.
- Upravte délku jehly: Rotate the grip of the tattoo pen to adjust the needle protrusion length according to your tattooing needs.
Image: Visual guide showing the four main steps for setting up the tattoo pen: installing needles, turning on power, adjusting voltage, and adjusting needle length.
Image: Close-up of the USB Type-C charging port on the Dragonhawk X3 tattoo pen, indicating compatibility with standard Type-C cords.
Video: This official product video demonstrates the unboxing, assembly of the cartridge needle, adjustment of voltage, and charging process for the Dragonhawk X3 Wireless Tattoo Gun Kit.
Operating the Tattoo Gun
The Dragonhawk X3 is designed for precise control and comfort during tattooing. Its ergonomic grip and balanced weight distribution help minimize hand fatigue during extended use.
svtage Recommendations:
- Podšívka: For crisp lines, a voltage rozsah 6.5 V - 7.5 V is generally recommended.
- Stínování: For smooth shading and color packing, a voltage rozsah 6.3 V - 7.0 V is typically effective.
These are general recommendations; optimal voltage may vary based on needle type, skin type, and personal preference. Always test on practice skin before working on actual skin.
Image: The Dragonhawk X3 tattoo pen being used for lining on practice skin, demonstrating its precision.
Image: The Dragonhawk X3 tattoo pen being used for shading on practice skin, showcasing jeho všestrannost.
Image: Close-up of the digital display and control buttons on the Dragonhawk X3, showing voltage seřízení.
Údržba
Proper maintenance ensures the longevity and optimal performance of your Dragonhawk X3 tattoo gun.
- Čištění: After each use, wipe down the exterior of the machine with a suitable disinfectant wipe. Do not immerse the machine in liquid.
- Likvidace jehly: Always dispose of used cartridge needles in a sharps container.
- Skladování: Store the tattoo gun in a clean, dry place away from direct sunlight and extreme temperatures.
- Péče o baterie: Chcete-li prodloužit životnost baterie, vyvarujte se častého úplného vybíjení. Pravidelně ji nabíjejte, i když ji nepoužíváte neustále.
Odstraňování problémů
If you encounter issues with your Dragonhawk X3, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stroj se nezapne | Slabá baterie nebo žádné nabití | Zařízení plně nabijte pomocí kabelu typu C. |
| Needle not moving or weak operation | Improperly installed cartridge needle; Low voltage nastavení | Ensure needle is securely installed. Increase voltage using the '+' button. |
| Stroj nadměrně vibruje | Loose cartridge needle; Internal component issue | Check and re-seat the cartridge needle. If issue persists, contact customer support. |
| svtage display not working | Device off; Display malfunction | Ensure device is powered on. If still not working, contact customer support. |
Specifikace
Key technical specifications for the Dragonhawk X3 Wireless Tattoo Gun:
| Funkce | Detail |
|---|---|
| Model | X3 |
| Materiál | CNC Carved Aluminum Alloy Shell |
| Délka | 126 mm (4.96 palce) |
| Průměr | 32 mm (1.19 palce) |
| Kapacita baterie | 1500 XNUMX mAh |
| Nepřetržitá pracovní doba | Až 6 hodin |
| Nastavitelný objtage | 5 V - 12 V |
| Délka zdvihu | 3.5 mm |
| Motor | High-Performance Custom Motor (Mcore-A coreless motor) |
| Kompatibilita s jehlou | Universal with all standard tattoo cartridge needles |
| Nabíjecí port | USB Type-C |
Image: Detailed specifications of the Dragonhawk X3 tattoo pen, including weight, size, battery capacity, voltage range, motor type, and stroke length.
Image: Illustration of the M-core A coreless motor, emphasizing its smooth and quiet operation within the tattoo machine.
Bezpečnostní upozornění
- This device is intended for tattooing purposes only.
- Always use sterile, individually packaged needles and other consumables.
- Ensure proper hygiene and sterilization practices are followed to prevent cross-contamination.
- Uchovávejte mimo dosah dětí.
- Nepokoušejte se zařízení rozebírat ani upravovat, mohlo by dojít ke ztrátě záruky a poruše.
- Consult with a professional or local regulations regarding safe tattooing practices.
Záruka a podpora
For warranty information, technical support, or any inquiries regarding your Dragonhawk X3 Wireless Tattoo Gun Kit, please refer to the contact details provided with your purchase or visit the official Dragonhawk webUschovejte si doklad o koupi pro případ reklamace.