Zavedení
This manual provides essential information for the safe and effective use of your Hyuduo JGY370 DC 6V Geared Motor. This motor is designed for various applications including electronic science kits, robotics projects, and DIY educational kits. It features PWM speed control technology, a turbine reduction design for high torque, and durable metal gears with a stainless iron hardened output shaft.
Obsah balení
Ověřte prosím, zda jsou všechny níže uvedené komponenty součástí balení:
- 1 x JGY370 Geared Motor
- 1 x CCM2 DC Motor Governor
- 1 x CW and CCW Switch
- 1 x Knob for Potentiometer
- 1 x Podložka
- 1 x montážní držák
- 4 x montážní šrouby
The image above displays all the items you should find in your product package. Ensure all parts are present and undamaged before proceeding with installation.
Pokyny pro nastavení
Follow these steps to set up your JGY370 Geared Motor:
- Montáž motoru: Use the provided mounting bracket and screws to secure the geared motor to your desired application surface. Ensure the motor is firmly attached to prevent vibration and movement during operation.
- Connecting the Governor: The CCM2 DC Motor Governor controls the motor's speed. Connect the motor to the output terminals of the governor. The governor's input terminals should be connected to a DC power source within the 10V-30V range. The motor itself operates within a DC 3-9V range.
- Installing the Potentiometer and Switch: The potentiometer (with knob and washer) is used for speed regulation. The CW and CCW switch is used to control forward, reverse, and stop functions. Connect these to the designated ports on the governor as per the wiring diagram (not provided, refer to governor's specific instructions if available).
- Připojení napájení: Connect your DC power supply (within 10V-30V for the governor) to the input terminals of the CCM2 governor. Ensure correct polarity.
Tento obrázek poskytuje jasný view of the geared motor unit, highlighting its robust construction and output shaft, which is crucial for mechanical integration into your projects.
Návod k obsluze
Once the motor and governor are correctly installed and powered, you can begin operation:
- Zapnutí: Apply power to the CCM2 DC Motor Governor.
- Ovládání směru: Use the CW and CCW switch to select the desired rotation direction (Clockwise, Counter-Clockwise) or to stop the motor.
- Nastavení rychlosti: Rotate the potentiometer knob to adjust the motor's speed. The PWM speed control technology allows for a wide range of speed adjustments from 5% to 95% of the maximum speed.
This image illustrates a potential use case for the motor, demonstrating its compact size and suitability for integration into household appliances or similar projects.
Údržba
Proper maintenance ensures the longevity and optimal performance of your motor:
- Avoid Restrictions: Ensure there are no obstructions or adhesive materials entering the bearing through the rotating shaft, as this can impede motor function and reduce lifespan.
- Zabránit přetížení: Do not overload the motor or attach objects that hinder rotation at the shaft end. Overloading can significantly shorten the motor's service life.
- Minimize Eccentric Loads: Avoid manufacturing or operating the motor under eccentric heavy radiation loads, as this can be detrimental to the motor's lifespan.
- Udržujte v čistotě: Periodically clean the motor and governor to prevent dust and debris buildup, which can affect performance and heat dissipation.
Odstraňování problémů
If you encounter issues with your JGY370 Geared Motor, consider the following:
- Motor neběží:
- Check all power connections to the governor and motor for secure contact and correct polarity.
- Ověřte, že napájecí zdroj objtage is within the specified range for the governor (DC 10V-30V).
- Ensure the CW/CCW switch is not in the 'Stop' position.
- Inspect for any physical obstructions preventing the motor shaft from rotating.
- Nekonzistentní rychlost:
- Check the potentiometer connection to the governor.
- Ensure the load on the motor is consistent and not exceeding its rated torsion.
- Přehřátí motoru:
- Snižte zatížení motoru.
- Ensure adequate ventilation around the motor and governor for heat dissipation.
- Verify the motor is not operating continuously at its maximum load capacity for extended periods.
If problems persist, consult the specifications and ensure all components are used within their rated limits.
Specifikace
JGY370 Geared Motor
| svtage (V) | Rotating Speed (RPM) | Rated Torsion (Kg.cm) | Jmenovitý proud (A) | Maximum Torsion (Kg.cm) | Stall Current (A) |
|---|---|---|---|---|---|
| 6 | 150 | 0.2 | <0.6 | 0.9 | 3.3 |
| 6 | 100 | 0.5 | <0.6 | 1.6 | 3.3 |
| 6 | 50 | 0.7 | <0.6 | 2 | 3.3 |
| 6 | 40 | 2 | <0.6 | 7.5 | 3.3 |
| 6 | 30 | 5.3 | <0.6 | 10 | 3.3 |
| 6 | 25 | 6.7 | <0.6 | 13 | 3.3 |
| 6 | 20 | 9 | <0.6 | 18 | 3.3 |
| 6 | 10 | 15.9 | <0.6 | 30 | 3.3 |
| 6 | 5 | 26.5 | <0.6 | 45 | 3.3 |
CCM2 DC Motor Governor
- Pracovní svtage: DC 10V-30V
- Výkon ovládání: 12V x 3A = 36W, 24V x 3A = 72W, <24V, maximum 120W
- Jmenovitý proud: 3A
- Maximální proud: 5A
- PWM Pulse Width Adjustment Range: 5–95 %
- potenciometr: Value B10K, wire length approx. 20cm / 7.9in, opening approx. 8mm / 0.3in
- Výstupní objemtage: Approximately equal to the input voltage
- Speed Governor Size: Přibližně 74 × 47 × 28 mm / 2.9 × 1.9 × 1.1 palce
Záruka a podpora
For warranty information, technical support, or any inquiries regarding your Hyuduo JGY370 DC 6V Geared Motor, please refer to the contact information provided with your purchase or visit the official Hyuduo webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.