Návod k obsluze hydraulického ručního čerpadla OXYMART CP-700-2

1. Konec produktuview

The OXMART CP-700-2 Hydraulic Hand Pump is an ultra-high pressure manual lifting pump designed for various hydraulic tools. It features a large oil storage capacity and a robust design for heavy-duty applications.

Klíčové vlastnosti:

• Oil Storage Capacity: 3200 CC
• Ultra-high Pressure: Up to 70MPA / 10000psi
• Oil Pipe Length: 2 M / 78.7 palce
• Kompaktní struktura: Convenient for portability and space-saving.
• Odolné komponenty: Features a ZG3/8" fast connector, smooth surface, and non-slip comfortable handle.

This pump is ideal for use with hydraulic cylinder jacks, hydraulic punchers, hydraulic flanges, hydraulic crimpers, hydraulic pipe benders, and other hydraulic equipment, ensuring efficient operation and time-saving.

Figure 1: The OXMART CP-700-2 Hydraulic Hand Pump with its hose and handle.

2. Pokyny k nastavení

Follow these steps to properly set up your hydraulic hand pump before operation:

1. Nainstalujte rukojeť: Insert the operating handle into its designated slot on the pump body. Ensure it is securely seated.
2. Open Dust Covers: Remove the yellow dust cover from the pump's oil outlet and the black dust cover from the ZG3/8" fast female connector on the oil pipe.
3. Connect Oil Pipe: Connect the oil pipe's ZG3/8" fast female connector to the pump's oil outlet. Tighten the connection firmly to prevent any oil leakage during operation.
4. Connect to Hydraulic Tool: Connect the other end of the oil pipe to your hydraulic tool (e.g., hydraulic cylinder jack). Ensure this connection is also tight and secure.
5. Loosen Vent Nut Switch: Locate the vent nut switch on the top of the pump. Loosen it counter-clockwise before use to facilitate the discharge of air and prevent the fuel tank from being sealed.

Figure 2: Labeled components of the hydraulic hand pump, including the anti-slip operating handle, 2m oil hose, oil filler port, pressure relief valve, ZG3/8" female fast connector, and dust-proof cover.

Figure 3: Close-up of the ZG3/8" Fast Female Connector and its protective dust cover, designed for a perfect fit with other hydraulic tools and preventing dust entry.

Figure 4: Detail of the Vent Nut Switch. Remember to loosen it before use and tighten it after working to avoid oil leakage.

Video průvodce nastavením:

3. Návod k obsluze

Once the pump is set up, follow these steps for safe and effective operation:

1. Tighten Oil Return Switch: Ensure the oil return switch (pressure relief valve) is tightened clockwise before beginning to pump. This builds pressure in the system.
2. Pumpujte rukojetí: Press the operating handle repeatedly. This action will raise the piston of the connected hydraulic tool (e.g., a hydraulic jack). Continue pumping until the desired height or pressure is achieved.
3. Uvolňovací tlak: To retract the piston of the hydraulic tool, slowly loosen the oil return switch counter-clockwise. The piston will retract itself as the pressure is released.
4. Tighten Vent Nut Switch: After completing your work, remember to tighten the vent nut switch clockwise to prevent any oil leakage during storage or transport.

Figure 5: Close-up of the Pressure Relief Valve. Turn clockwise to build pressure (ON) and counter-clockwise to release pressure (OFF).

Videonávod k obsluze:

4. Údržba

Proper maintenance ensures the longevity and optimal performance of your hydraulic hand pump:

• Pravidelný úklid: Keep the pump and all connections clean and free from dirt, dust, and debris. Use a clean cloth to wipe down surfaces.
• Zkontrolujte netěsnosti: Periodically inspect all connections and the pump body for any signs of oil leakage. Address any leaks immediately to prevent loss of hydraulic fluid and potential damage.
• Hladina hydraulické kapaliny: Check the hydraulic fluid level regularly. If the level is low, refill with the recommended hydraulic oil. Refer to the product specifications for the correct type of oil.
• Správně skladujte: When not in use, store the hydraulic pump in a clean, dry environment, away from extreme temperatures and corrosive substances. Ensure all dust covers are in place.
• Zkontrolujte hadici: Check the oil hose for any kinks, cracks, or damage. Replace the hose if any wear or damage is observed.

5. Řešení problémů

If you encounter issues with your hydraulic hand pump, consider the following common problems and solutions:

If you are unable to resolve an issue using these steps, please contact OXMART customer support.

6. Specifikace produktu

Detailed specifications for the OXMART CP-700-2 Hydraulic Hand Pump:

• Model: CP-700-2
• Oil Storage Capacity: 3200 CC
• Ultra-high Pressure: 70MPA / 10000psi
• Oil Pipe Length: 2 M / 78.7 palce
• Délka čerpadla: Přibližně 30.3 palce (77 cm)
• Typ konektoru: ZG3/8" Fast Connector
• Rozměry balení: 30 x 7.3 x 7.3 palce
• Hmotnost: 40 libry
• Výrobce: OXMART
• ASIN: B0CFLN36LH

Figure 6: Visual representation of key product parameters and dimensions.

Obrázek 7: Přamples of wide applications for the hydraulic hand pump in various industries such as power, steel, bridges, shipbuilding, and machinery.

7. Záruka a podpora

Your OXMART CP-700-2 Hydraulic Hand Pump is manufactured by OXMART, a brand committed to high-quality and high-performance products. For detailed warranty information and customer support, please refer to the official documentation or contact the manufacturer directly.

Oficiální uživatelská příručka ve formátu PDF je k dispozici ke stažení:

Stáhnout oficiální uživatelskou příručku (PDF)

Pro další pomoc můžete také navštívit OXMART Store on Amazon.