Witt ETNA Rotante Pizza Oven User Manual

1. Úvod

Welcome to the Witt ETNA Rotante Pizza Oven. This manual provides essential information for safe and efficient operation, setup, maintenance, and troubleshooting. Please read thoroughly before first use to ensure optimal performance and safety.

Figure 1: Witt ETNA Rotante Pizza Oven in Mat Orange.

2. Bezpečnostní informace

Vaše bezpečnost je prvořadá. Dodržujte prosím následující pokyny:

• Pouze pro venkovní použití: Tento spotřebič je určen výhradně pro venkovní použití. Nepoužívejte jej v interiéru ani v uzavřených prostorách.
• Větrání: Během provozu zajistěte dostatečné větrání kolem trouby.
• Vůle: Maintain a minimum clearance of 1 foot (30 cm) from the back and sides, and 3 feet 4 inches (1 meter) from the front and above, to any combustible materials.
• Stabilní povrch: Always place the oven on a secure, level, and non-combustible surface.
• Horké povrchy: Surfaces become extremely hot during use. Do not touch hot parts without appropriate protective gear.
• Připojení plynu: Gas connection requirements may vary by country. Always ensure connections are secure and leak-free.
• Ůnik plynu: If you smell gas, immediately shut off the gas supply to the appliance and extinguish any open flames. Do not attempt to ignite the oven.
• Zdvihání: The oven is heavy. It must be lifted and moved by at least two people to prevent injury.

3. Konec produktuview

The Witt ETNA Rotante Pizza Oven is engineered for exceptional outdoor pizza making. Key features include:

• 360-Degree Rotating Pizza Stone: Ensures perfectly even cooking and crispy crusts without manual turning.
• Dual Burner System: Features a U-shaped main burner and an additional booster burner located beneath the pizza stone for rapid heating and consistent high temperatures.
• Rychlé vaření: Capable of cooking pizzas in under 60 seconds once preheated.
• Odolná konstrukce: Made from high-quality alloy steel and aluminum for longevity.
• Velká varná plocha: Accommodates pizzas up to 16 inches (40.5 cm) in diameter.
• Přenosnost: Equipped with foldable aluminum legs with rubber bottoms for easy setup and storage.

Figure 2: Key features of the Witt ETNA Rotante Pizza Oven.

4. Nastavení

1. Rozbalení: Carefully remove the oven and all components from the packaging. Retain packaging for future transport or storage.
2. Stone Placement: Ensure the 360-degree rotating pizza stone is correctly seated within the oven. If there is a visible gap at the front of the stone, use the included stone adjustment tool to hook the back of the stone and pull it forward until it is flush.
3. Umístění: Place the oven on a stable, level, and non-combustible outdoor surface. Ensure all safety clearances mentioned in Section 2 are met. If using on a windy day, orient the oven so the mouth faces away from the wind.
4. Připojení plynu:
   • Pull the collar back on the gas hose connector and firmly attach the hose onto the gas inlet on the oven.
   • Attach the regulator to your propane gas tank. Ensure all connections are tight. (Note: Gas connection types may vary by country. Refer to local regulations.)
5. Ignitor Batteries: For the ignitor batteries, remove the thermometer from the front of the oven. Unscrew the cap and place the battery in the correct way round, before screwing the cap back into position.
6. Digital Temperature Display Connection: To connect the digital temperature display to the thermometer, locate the jack connection in the display port and plug into the rear of the display. Finally, replace the digital temperature display and turn on to test.

Figure 3: Dimensions of the Witt ETNA Rotante Pizza Oven.

5. Návod k obsluze

1. Předehřívání:
   • To light the gas burner, press the control dial in and turn the dial 90° until you hear a clicking sound and the burner ignites.
   • Hold the control dial in for up to 30 seconds after the burner ignites. Holding this position allows the flame failure device to heat up to temperature.
   • Allow the oven to preheat to 500 °C (950 °F). This typically takes less than 15 minutes due to the booster burner and innovative U-shaped burners.
   • For your first firing, it is highly recommended to put the burner on a medium to low flame for 30 minutes.
2. Vaření pizzy:
   • Once the oven reaches the desired temperature, carefully slide your pizza onto the rotating stone using a pizza peel.
   • The 360-degree rotating stone will ensure your pizza cooks evenly, providing a perfect leopard-spotted and crispy crust without the need for manual rotation.
   • Pizzas will cook very quickly, often in less than a minute. Monitor closely to prevent overcooking.
   • Adjust the flame intensity using the control knob if the pizza is cooking too fast on top or not enough on the bottom.

Figure 4: The booster burner ensures continuous high heat.

Figure 5: Pizza cooking on the 360-degree rotating stone.

6. Údržba

1. Ochladit: Always allow the oven to cool down completely before attempting any cleaning or maintenance. The cool-down time can vary but typically takes approximately one and a half hours. Never touch the surface or stone before it has cooled down.
2. Čištění kamene na pizzu: Once completely cool, the pizza stone can be cleaned with water and a cloth. Do not use a polypropylene brush on a hot stone, as it can melt and damage the stone.
3. Čištění exteriéru: Otřete vnější povrchy reklamouamp tkanina. Vyhněte se abrazivním čisticím prostředkům.
4. Skladování: When not in use, especially during adverse weather conditions, it is recommended to cover the oven with a suitable protective cover to prolong its lifespan.

7. Řešení problémů

If you encounter any issues, please refer to the following common troubleshooting steps:

• Hořák se nezapálí: If the burner fails to ignite, wait 5 minutes before trying again. If it continues to fail, please review the detailed troubleshooting guide in the full user manual or contact customer support.
• Pizza Stone Not Heating Evenly: Ensure both the U-shaped main burner and the booster burner are functioning correctly. Verify that the gas supply is adequate and that the oven has been allowed sufficient time to preheat to the target temperature.
• Pizza Bottom Not Cooked / Top Burned: This often indicates the pizza stone is not hot enough, or the flame intensity is too high. Ensure the oven is fully preheated to 500 °C (950 °F) before cooking. Adjust the flame to a lower setting once the pizza is inserted to allow the bottom to cook without burning the top.

8. Specifikace

9. Záruka a podpora

For detailed warranty information, product registration, and customer support, please visit the official Witt webnebo se obraťte na autorizovaného prodejce. Uschovejte si doklad o koupi pro případné reklamace.

Thank you for choosing Witt. Enjoy your delicious homemade pizzas!