UNI-T UT665 Industrial Endoscope Instruction Manual

1. Konec produktuview

The UNI-T UT665 Industrial Endoscope is a non-destructive testing device designed for inspecting hard-to-reach areas. It features a high-definition probe, a 2.4-inch display, and IP67 waterproofing for reliable performance in various environments.

Image: The UNI-T UT665 Industrial Endoscope, showcasing its handheld unit and flexible camera probe.

2. Klíčové vlastnosti

• Real-time Clear Display: Equipped with a 2.4-inch TFT screen (480x234 resolution) for immediate viewIng.
• Rotatable Images: Allows for image rotation to adjust vieworientace.
• Flexible Camera Probe: Features a 1-meter coil length probe that can be bent and shaped for various inspection needs.
• Adjustable Image Saturation: 6 levels of image saturation adjustment for optimal visual clarity.
• Adjustable LED Brightness: 4 levels of LED light intensity for illuminating dark inspection areas.
• Vodotěsná sonda IP67: The 9mm diameter probe is waterproof, suitable for wet environments.
• Ostřící vzdálenost: Optimal focus range of 20mm to 100mm.
• Odolná konstrukce: Outer shell wrapped with soft rubber for shock-proof, waterproof, wear-resistant, and corrosion-resistant performance.
• Ergonomický design: Handheld unit designed for comfortable and non-slip grip, lightweight and portable.
• Dlouhá výdrž baterie: Provides 6-8 hours of operation on a single set of batteries.

Image: The UT665 endoscope designed for portable and comfortable use, highlighting its ergonomic grip.

Image: Detail of the UT665 endoscope, illustrating its robust and waterproof probe construction.

3. Pokyny k nastavení

3.1 Obsah balení

Balíček obsahuje:

• UT665 Main Unit
• Flexible Camera Probe
• Lithium Metal Batteries (4x 1.5V R6)
• Uživatelská příručka

3.2 Instalace baterie

1. Locate the battery compartment cover on the handle of the main unit.
2. Open the cover and insert four 1.5V R6 (AA) batteries, ensuring correct polarity (+/-).
3. Bezpečně zavřete kryt bateriového prostoru.

3.3 Připojení sondy

1. Align the connector of the flexible camera probe with the port on the top of the main unit.
2. Gently push the probe connector into the port.
3. Tighten the threaded collar on the probe connector to secure it to the main unit. Ensure it is firmly attached to prevent disconnection during use.

Image: Visual guide for installing batteries and connecting the probe to the UT665 main unit.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

• Chcete-li zařízení zapnout, stiskněte a podržte tlačítko Moc tlačítko (), dokud se obrazovka nerozsvítí.
• Chcete-li přístroj vypnout, stiskněte a podržte tlačítko Moc tlačítko znovu, dokud se obrazovka nevypne.

4.2 Nastavení jasu LED diod

• Stiskněte tlačítko Světlo tlačítko () to cycle through the 4 levels of LED brightness.
• Select the appropriate brightness for your inspection environment.

4.3 Adjusting Image Saturation

• Stiskněte tlačítko Nasycení tlačítko () to adjust the image saturation through 6 available levels.
• This helps optimize color representation for clearer viewIng.

4.4 Otočení obrazu

• The device supports image rotation. Refer to the on-screen indicators or specific button functions for rotating the displayed image if needed.

4.5 Obecné použití

• Once powered on and the probe is connected, carefully insert the flexible probe into the area you wish to inspect.
• Observe the real-time image on the 2.4-inch display.
• Maneuver the probe as needed to get the desired view.

Image: The UT665 endoscope in use, demonstrating the clear imaging capabilities and adjustable settings.

5. Údržba

• Čištění: After each use, gently wipe the probe and main unit with a soft, dry cloth. For stubborn dirt on the probe, use a slightly damp cloth and ensure it is completely dry before storage. Do not use abrasive cleaners or solvents.
• Skladování: Store the endoscope in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect the probe from the main unit and remove batteries if storing for extended periods.
• Péče o baterie: Replace batteries when the low battery indicator appears. Always use fresh, high-quality batteries.
• Manipulace se sondou: Avoid sharp bends or excessive force on the flexible probe to prevent internal damage.

6. Řešení problémů

7. Specifikace

Image: A detailed table outlining the technical specifications of the UT665 endoscope.

8. Aplikace

The UNI-T UT665 Industrial Endoscope is suitable for various inspection tasks across multiple fields:

• Automobilový průmysl: Inspecting engine components, exhaust systems, and other vehicle parts.
• Domácnost: Checking pipes, drains, and hard-to-reach areas in homes.
• Stroje: Examining internal components of industrial machinery for wear or damage.
• HVAC: Inspecting ducts, vents, and air conditioning units.
• Instalatérství: Visual inspection of pipes and drainage systems.
• Konstrukce: Checking structural integrity in confined spaces.

Obrázek: Přamples of the UT665 endoscope being used in auto repair, mechanical inspections, conduit checks, and other difficult-to-access locations.

Image: The UT665 endoscope being used to inspect components within an automobile engine bay.

Image: The UT665 endoscope inspecting the interior of a pipe or conduit.

9. Záruka a podpora

For warranty information and technical support, please refer to the documentation included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.