NEC NP-P547UL

Uživatelská příručka k LCD projektoru NEC Sharp NP-P547UL

Model: NP-P547UL

Zavedení

This manual provides essential instructions for the safe and efficient operation of your NEC Sharp NP-P547UL LCD Projector. Please read this manual thoroughly before using the projector and retain it for future reference.

Bezpečnostní informace

Dodržujte následující bezpečnostní opatření, abyste zabránili poškození projektoru a zajistili bezpečnost uživatele:

  • Neblokujte větrací otvory. Zajistěte dostatečné proudění vzduchu kolem projektoru.
  • Avoid direct exposure to the projector lens light output.
  • Neumisťujte projektor na nestabilní povrchy.
  • Před čištěním nebo opravou odpojte napájení.
  • Veškeré opravy svěřte kvalifikovanému servisnímu personálu.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • NEC Sharp NP-P547UL LCD Projector
  • Dálkové ovládání
  • Přepravní taška
  • HDMI kabel
  • Power Cord (not explicitly listed but implied for operation)
  • Uživatelská příručka (tento dokument)

Nastavení

1. Projector Placement

The NP-P547UL projector is designed for versatile placement, including ceiling mount and floor mount configurations. Choose a location that provides the desired screen size and optimal viewing úhly.

NEC Sharp NP-P547UL LCD Projector

A white NEC Sharp NP-P547UL LCD Projector, viewed from the front-right, showing the lens and ventilation grilles. This image illustrates the general appearance of the projector.

  • Držák na podlahu: Place the projector on a stable, level surface. Adjust the projector feet to fine-tune the image angle.
  • Držák na strop: Securely attach the projector to a compatible ceiling mount kit (sold separately). Ensure proper alignment with the projection screen.

2. Připojení zařízení

Connect your video source (e.g., laptop, Blu-ray player) to the projector using the appropriate cables.

  1. Locate the HDMI input port on the projector.
  2. Connect one end of the HDMI cable to your source device and the other end to the projector's HDMI input.
  3. For audio, ensure your HDMI source is configured to output audio, or connect external audio devices if necessary.

3. Zapnutí

  1. Připojte napájecí kabel k projektoru a poté do elektrické zásuvky.
  2. Press the power button on the projector or the remote control to turn on the unit. The power indicator light will illuminate.

Provozní

1. Základní obsluha

  • Výběr vstupu: Use the "Input" button on the remote control or projector panel to cycle through available input sources (e.g., HDMI).
  • Navigace v nabídce: Use the arrow buttons and "Enter" button on the remote control to navigate the on-screen display (OSD) menu.

2. Úprava obrazu

Adjust the projected image for optimal clarity and size.

  • Soustředit: Otáčejte zaostřovacím kroužkem na objektivu projektoru, dokud nebude obraz ostrý.
  • Lupa: Adjust the zoom ring on the projector lens to change the image size without moving the projector.
  • Korekce lichoběžníkového zkreslení: If the image appears trapezoidal, use the keystone correction function in the OSD menu to square the image.
  • Rezoluce: The projector supports a native resolution of 1920 x 1200 (WUXGA). Ensure your source device is set to a compatible resolution for best results.

3. Vypnutí

To turn off the projector, press the power button twice (or once, then confirm on-screen) on the remote control or projector panel. Allow the projector to cool down before disconnecting power or moving it.

Údržba

1. Čištění

  • Projektor Casing: Use a soft, dry cloth to wipe the exterior. For stubborn marks, dampOtřete hadřík jemným, neabrazivním čisticím prostředkem.
  • Čočka: Gently clean the lens with a lens cleaning cloth or lens paper. Avoid abrasive materials.
  • Vzduchový filtr: Regularly check and clean the air filter to maintain optimal cooling and performance. Refer to the OSD menu for filter usage hours.

2. Životnost světelného zdroje

The NP-P547UL projector utilizes a durable light source with an estimated lifespan of up to 20,000 hours in normal mode. This extended life reduces the need for frequent replacements.

Odstraňování problémů

ProblémMožná příčinaŘešení
Není zobrazen žádný obrázek
  • Napájecí kabel odpojen
  • Je vybrán nesprávný vstupní zdroj
  • Zdrojové zařízení nevydává signál
  • Zkontrolujte připojení napájení.
  • Select the correct input source using the "Input" button.
  • Verify source device is powered on and configured correctly.
Obraz je rozmazaný
  • Objektiv rozostřený
  • Projektor je příliš blízko/daleko od promítací plochy
  • Upravte zaostřovací kroužek na objektivu.
  • Adjust the zoom ring or reposition the projector.
Obrázek je lichoběžníkový
  • Projektor není kolmý k promítací ploše
  • Use keystone correction in the OSD menu.
  • Adjust projector angle.
Dálkové ovládání nefunguje
  • Baterie jsou vybité
  • Překážka mezi dálkovým ovladačem a projektorem
  • Vyměňte baterie.
  • Ensure clear line of sight to the projector's IR receiver.

Specifikace

FunkceDetail
ZnačkaNEC
Číslo modeluNP-P547UL
Technologie displejeLCD
Nativní rozlišení1920 1200 x (WUXGA)
Poměr stran16:10
Život světelného zdroje20 000 hodin (normální režim)
Technologie připojeníHDMI
Možnosti montážeCeiling Mountable, Floor Mountable
Doporučená použitíObchod, vzdělávání, domácí kino
Hmotnost položky27.1 libry
VýrobceNec Display Solutions

Záruka a podpora

For warranty information and technical support, please refer to the official NEC webnebo se obraťte na autorizovaného prodejce. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.

Online zdroje: www.necdisplay.com

© 2023 NEC Display Solutions. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.