Pipishell Full Motion TV Wall Mount with Extension Bracket Instruction Manual

1. Důležité bezpečnostní informace

Please read these instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. The manufacturer is not responsible for damage or injury caused by incorrect mounting or operation.

• Nosnost: This TV wall mount is designed for TVs weighing up to 110 lb (50 kg)Nepřekračujte tento hmotnostní limit.
• Kompatibilita velikosti TV: Kompatibilní s většinou 40-82 palce flat or curved TVs.
• Kompatibilita VESA: Podporuje montážní vzory VESA od 200x100mm až 600x400mm. Verify your TV's VESA pattern before installation.
• Typ stěny: This mount is designed for installation on dřevěné cvočky or solid concrete/brick walls. NEINSTALUJTE pouze na sádrokarton.
• Seznam UL: Tento produkt má certifikaci UL, což znamená, že splňuje specifické bezpečnostní normy.

Image 1.1: Reinforced stability of the mount, highlighting heavy-duty steel arms and UL certification for safety and durability.

2. Obsah balení

Please check to ensure all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer service.

2.1 Potřebné nástroje (není součástí balení)

• Tužka
• Vyhledávač cvočků
• Drill with appropriate drill bits (e.g., 5/32" (4mm) for wood studs, 3/8" (10mm) for concrete)
• Úroveň
• Svinovací metr
• Nástrčný klíč nebo nastavitelný klíč
• Šroubovák s křížovou hlavou

2.2 Hardware and Components (Included)

• Sestava nástěnné desky
• TV držáky (2)
• Prodlužovací konzoly (2)
• Various TV Screws, Washers, and Spacers (M4, M6, M8)
• Lag Bolts and Concrete Anchors
• Hladinová bublina
• Stahovací pásky

3. Nastavení a instalace

3.1 Kontroly před instalací

1. Verify your TV's weight, size, and VESA pattern are within the mount's specifications.
2. Determine the desired viewing height for your TV.
3. Locate the wall studs using a stud finder. Mark the center of the studs.

3.2 Instalace nástěnné desky

The extension bracket feature allows for installation on wood studs with spacing between 16 and 24 inches.

1. Position the wall plate assembly on the wall at your desired height, ensuring it is level. Mark the drill holes.
2. For wood stud installation, drill pilot holes (e.g., 5/32" or 4mm) into the center of the studs. For concrete/brick, drill pilot holes (e.g., 3/8" or 10mm) and insert concrete anchors.
3. Attach the wall plate to the wall using the provided lag bolts. Tighten securely.

Image 3.1: The extended wall plate design provides a flexible solution for mounting on walls with stud spacing between 16 and 24 inches.

Image 3.2: This feature helps center your TV for optimal viewing, even when wall studs are not perfectly centered.

3.3 Připevnění držáků televizoru k televizoru

1. Opatrně položte televizor displejem dolů na měkký, čistý povrch.
2. Select the appropriate screws, washers, and spacers for your TV's VESA mounting holes.
3. Attach the two TV brackets to the back of your TV. Ensure they are securely fastened and evenly spaced.

3.4 Montáž televizoru na nástěnnou desku

1. With assistance, carefully lift the TV and hook the TV brackets onto the wall plate.
2. Ujistěte se, že je televizor bezpečně upevněn na nástěnné desce.
3. Tighten the safety screws or locking mechanisms on the TV brackets to prevent accidental dislodgement.

4. Ovládání držáku televizoru

This full motion mount allows for flexible adjustment to achieve the best viewúhel.

4.1 Nastavení natočení

The mount allows for a swivel range of +/-45°. Gently push or pull the TV to the desired left or right angle.

Image 4.1: The mount offers a smooth swivel motion of up to 45 degrees in either direction for flexible viewIng.

4.2 Nastavení sklonu

Adjust the tilt angle from +5° až -15° pro snížení oslnění a optimalizaci viewing. This adjustment is tool-free.

Image 4.2: Easily adjust the TV's vertical angle from +5° to -15° without tools to minimize glare and improve comfort.

4.3 Vysunutí a zasunutí

The mount allows the TV to extend from the wall by 2.89 palců až 16.3 palců. Gently pull the TV forward or push it back towards the wall to adjust the distance.

Image 4.3: Adjust the TV's distance from the wall, extending up to 16.3 inches or retracting to 2.89 inches for optimal viewprostoru.

5. Údržba

• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené a bezpečné.
• Čištění: Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Mazání: The moving parts are designed for smooth operation. No lubrication is typically required. If movement becomes stiff, check for debris or loose components.

6. Řešení problémů

• Televizor není vodorovně umístěn: Check the level of the wall plate during installation. Most mounts have a post-installation leveling adjustment. Refer to the specific mechanism on your mount.
• Difficulty adjusting swivel/tilt/extension: Ensure no cables are snagged or obstructing movement. Check if any adjustment knobs or screws are overtightened. The mount features improved torque accuracy for smoother movement.
• Držák se na zdi zdá být uvolněný: Immediately remove the TV from the mount. Re-check all wall plate fasteners and ensure they are securely anchored into the studs or concrete. If issues persist, consult a professional installer.
• TV brackets do not fit TV: Verify your TV's VESA pattern matches the mount's compatibility (200x100mm to 600x400mm). Ensure you are using the correct screws and spacers for your TV model.

7. Specifikace

8. Záruka a zákaznická podpora

Pipishell products are designed for durability and performance. For warranty information or technical assistance, please contact Pipishell customer support through their official webna webu nebo u prodejce, kde byl produkt zakoupen.

Při kontaktování podpory si prosím připravte model produktu a datum zakoupení.