Orient Electric Urja+ 10L Water Heater Instruction Manual

1. Úvod

Thank you for choosing the Orient Electric Urja+ 10L Water Heater. This manual provides essential information for the safe installation, operation, and maintenance of your new appliance. Please read these instructions carefully before use and retain them for future reference.

Přední view of the Orient Electric Urja+ 10L Water Heater, showcasinjeho kompaktní design a ovládací panel.

2. Bezpečnostní pokyny

Vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.

• Elektrická bezpečnost: Ujistěte se, že je ohřívač vody připojen k řádně uzemněné elektrické zásuvce. Nepoužívejte prodlužovací kabely. Před jakoukoli údržbou nebo opravou odpojte napájení.
• Tlak vody: This appliance is suitable for high-rise buildings with up to 8 bar pressure compatibility. Ensure your home's water pressure is within the recommended limits.
• Instalace: Installation must be performed by a qualified technician in accordance with local regulations and this manual. Improper installation can lead to electric shock, water leakage, or fire.
• Ovládání teploty: Ne tamper with the temperature control knob. Set the temperature to a safe level to prevent scalding.
• Děti a zranitelné osoby: Tento spotřebič není určen k používání osobami se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo s nedostatkem zkušeností a znalostí, pokud nejsou pod dohledem nebo jim nebyly poskytnuty instrukce.
• Multifunction Valve: The included multifunction valve is a critical safety component. Do not remove or obstruct it.

Detailed diagram outlining the water heater's safety mechanisms, including primary and secondary automatic overheat protection, enhanced safety with multifunction valve, fire retardant cable, and rust-resistant IPX4 powder-coated metal body.

3. Konec produktuview

3.1 Klíčové vlastnosti

• Ultra-Diamond Glassline Coated Tank: Provides 40% longer tank lifespan and enhanced corrosion resistance.
• Magnesium Anode Rod: 27% thicker for good corrosion resistance and extended life.
• Nickel Coated Heavy Copper Heating Element: Ensures efficient and durable heating.
• Whirflow Technology: Designed for 20% more hot water output.
• Thick PUF Insulation: Offers 10% more heat retention, contributing to energy efficiency.
• Ovládací knoflík teploty: Allows users to set the desired water temperature.
• Neon Indicators: Display power and heating status for convenience.
• 8 Bar Pressure Compatibility: Suitable for high-rise buildings.
• IPX4 Powder Coated Metal Body: Provides rust resistance and splash protection.

Image showing the water heater installed in a bathroom setting, emphasizing its durable construction and suitability for high-rise buildings with 8 bar pressure compatibility.

Visual representation of the water heater's energy-efficient performance, featuring Whirflow Technology for 20% more hot water output and thick PUF insulation for 10% more heat retention.

Image demonstrating the safety aspects of the water heater, including a moulded 3-pin plug for better load efficiency and a multifunction valve for enhanced safety.

Display of the water heater's convenient features, such as the temperature control knob, neon indicators for power and heating status, and a temperature indicator dial.

3.2 Součásti zahrnuté v balení

The following components are included with your Orient Electric Urja+ 10L Water Heater:

• 1 Unit Water Heater
• 1 set mounting fasteners
• 1 unit multi-function valve
• Uživatelská příručka (tento dokument)

4. Nastavení a instalace

Proper installation is crucial for the safe and efficient operation of your water heater. It is strongly recommended that installation be carried out by a qualified and authorized technician.

4.1 Kontroly před instalací

1. Ensure the installation location is suitable, with adequate wall strength to support the filled water heater (approx. 18.8 kg).
2. Verify that the electrical supply matches the appliance's requirements (2000W, 230V AC, 50Hz).
3. Confirm availability of proper water inlet and outlet connections.
4. Ensure sufficient space around the water heater for maintenance and ventilation.

4.2 Montáž ohřívače vody

1. Mark the drilling points on the wall using the provided mounting template or by measuring the bracket on the unit.
2. Vyvrtejte otvory a vložte do nich vhodné hmoždinky.
3. Secure the mounting fasteners firmly to the wall.
4. Carefully lift and hang the water heater onto the secured fasteners, ensuring it is stable and level.

4.3 Připojení vody

1. Connect the cold water inlet pipe to the blue marked inlet on the water heater.
2. Connect the hot water outlet pipe to the red marked outlet on the water heater.
3. Install the multi-function valve (pressure relief valve) on the cold water inlet pipe as per the diagram in the detailed installation guide. Ensure it is installed correctly to prevent over-pressurization.
4. Open the main water supply valve and check for any leaks. Allow the tank to fill completely before proceeding.

4.4 Elektrické připojení

1. Ensure the water heater is properly grounded.
2. Plug the moulded 3-pin plug into a dedicated, grounded electrical socket.
3. Do not switch on the power until the tank is completely filled with water.

Diagram showing the physical dimensions of the Urja+ 10L water heater: 50 cm height, 31 cm width, and 33.5 cm depth.

5. Návod k obsluze

5.1 První spuštění

1. After installation and ensuring the tank is full, switch on the electrical power supply to the water heater.
2. The power indicator (neon light) will illuminate.

5.2 Nastavení teploty vody

1. Rotate the temperature control knob on the front panel to your desired temperature setting.
2. The heating indicator (neon light) will illuminate, indicating that the heating element is active.
3. Once the set temperature is reached, the heating indicator will turn off, and the water heater will maintain the temperature automatically.

5.3 Každodenní používání

• Turn on the hot water tap to draw hot water. The water heater will automatically reheat water as needed.
• For energy saving, consider turning off the water heater when not in use for extended periods.

6. Údržba

Regular maintenance ensures the longevity and efficient performance of your water heater. Always disconnect power before performing any maintenance.

6.1 Vypuštění nádrže

If the water heater will not be used for a long period or if there is a risk of freezing, drain the tank:

1. Vypněte přívod proudu do ohřívače vody.
2. Zavřete přívodní ventil studené vody.
3. Otevřete kohoutek s teplou vodou ve vaší domácnosti, abyste uvolnili tlak.
4. Open the drain valve (usually located at the bottom of the water heater or on the multifunction valve) and allow all water to drain out.

6.2 Čištění

• Vnější část ohřívače vody očistěte měkkým,amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Periodically check the multifunction valve for any blockages or signs of leakage.

6.3 Kontrola anodové tyče

The magnesium anode rod protects the tank from corrosion. It should be inspected and replaced periodically (typically every 1-2 years, depending on water quality) by a qualified technician.

7. Řešení problémů

Než kontaktujete zákaznickou podporu, prostudujte si prosím následující běžné problémy a jejich řešení:

8. Specifikace

9. Informace o záruce

Your Orient Electric Urja+ 10L Water Heater comes with the following warranty:

• Záruka na produkt: 2 roky
• Záruka na topné těleso: 3 roky
• Záruka na nádrž: 7 roky

Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use conditions. It does not cover damage due to improper installation, misuse, neglect, or unauthorized repairs.

10. Zákaznická podpora

For any queries, service requests, or technical assistance, please contact Orient Electric customer support:

• Výrobce: Orient Electric
• Kontaktní údaje: Refer to the contact details provided on the product packaging or the official Orient Electric webmísto.
• Online podpora: Návštěva www.orientelectric.com for FAQs and service center locations.