Zavedení
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Corally Asuga XLR 6S RTR high-performance off-road racing buggy. The Asuga XLR is designed for durability and speed, featuring a robust chassis and powerful components. Please read this manual thoroughly before operating the vehicle to ensure proper use and to maximize its lifespan.
Bezpečnostní informace
- Always operate the RC buggy in open areas, away from people, pets, and obstacles.
- Udržujte ruce, vlasy a volný oděv mimo pohyblivé části.
- Do not operate near water or in wet conditions unless the vehicle is specifically designed for it.
- Ensure batteries are charged correctly and safely. Use only compatible chargers and batteries.
- Supervise children during operation. This product is not a toy and requires responsible handling.
- Vypněte vozidlo a vysílač, pokud je nepoužíváte.
Nastavení
1. Instalace baterie
The Corally Asuga XLR requires 4-6S block LiPo batteries or 2x2S and 2x3S LiPo batteries with XT90 connectors.
- Ujistěte se, že je vypínač vozidla v poloze VYPNUTO.
- Otevřete přihrádku na baterie.
- Carefully insert the charged LiPo batteries, ensuring correct polarity.
- Secure the batteries using the provided straps or holders.
- Bezpečně uzavřete přihrádku na baterie.
Obrázek: Shora dolů view of the Corally Asuga XLR chassis, highlighting the battery compartment and internal electronics. This shows the layout for battery placement.
2. Příprava vysílače
Install AA batteries into the 2.4 GHz 2-channel radio system transmitter. Refer to the transmitter's specific manual for detailed instructions on battery installation and binding procedures if necessary.
3. Počáteční kontroly
- Verify all screws are tightened and components are secure.
- Check the steering and throttle response before driving.
- Ensure the suspension moves freely without binding.
Návod k obsluze
1. Zapnutí
- Nejprve zapněte vysílač.
- Then, turn on the vehicle's power switch. The Hobbywing Torox 185 ESC will initialize.
- Wait for the system to establish a connection (indicated by LED lights on the ESC/receiver).
Obrázek: Podrobný view of the Hobbywing Torox 185 ESC and power switch, showing the main electronic components for power control.
2. Základní ovládací prvky
- Škrticí klapka: Pull the trigger on the transmitter to accelerate forward. Push the trigger to brake or reverse.
- Řízení: Turn the steering wheel on the transmitter left or right to control the vehicle's direction. The Team Corally CR-HV 7225 Digital Servo provides precise steering.
3. Tipy pro řízení
- Start with gentle throttle inputs to get accustomed to the vehicle's power.
- Practice steering in open spaces before attempting higher speeds or complex maneuvers.
- Buďte si vědomi svého okolí a potenciálních nebezpečí.
- Monitor battery levels and stop operation before batteries are fully depleted to prevent damage.
Údržba
Regular maintenance is crucial for the longevity and performance of your Corally Asuga XLR.
1. Po každém běhu
- Clean the vehicle: Remove dirt, dust, and debris from the chassis, suspension, and drivetrain using a soft brush or compressed air.
- Inspect for damage: Check for loose screws, bent parts, or damaged components.
- Check wheel nuts: Ensure all wheel nuts are tight.
- Battery care: Disconnect and properly store LiPo batteries. Never leave them fully charged for extended periods.
2. Pravidelná údržba
- Ložiska: The vehicle features "ABEC 3" Rubber sealed ball bearings. Periodically clean and lubricate them to ensure smooth operation. Replace worn bearings.
- šoky: Inspect the 16mm "Big Bore" aluminum shock absorbers for leaks and proper damping. Refill or replace shock oil as needed.
- Hnací ústrojí: Check the precision CNC-cut hardened steel spur gear, differential spiral bevel gears, and S2 hardened spring steel drive joints for wear. Lubricate moving parts as recommended by Corally.
- pneumatiky: Inspect the low profile Rebel XMS Off-Road tires for wear and damage. Ensure they are securely mounted.
Obrázek: Spodní strana view of the Corally Asuga XLR chassis, highlighting the robust construction and suspension arm holders. Regular inspection of these areas is important for maintenance.
Odstraňování problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Vozidlo nereaguje |
|
|
| Loss of range/intermittent control |
|
|
| Motor neběží nebo běží pomalu |
|
|
Specifikace
| Funkce | Detail |
|---|---|
| Typ modelu | Electric Powered 4WD XL Buggy RTR - 6S Brushless Power |
| Číslo modelu | C-00288-R |
| Rozměry (D x Š x V) | 582 mm x 352 mm x 210 mm (přibližně 22.99 x 14.65 x 8.27 palce) |
| Hmotnost položky | 4.45 kg (9.81 liber) |
| Motor | Team Corally Kuron 825 Brushless Motor |
| ESC | Hobbywing Torox 185 ESC |
| Servo | Team Corally CR-HV 7225 Digital Servo |
| Ložiska | "ABEC 3" Rubber sealed ball bearings |
| Tlumiče nárazů | 16mm "Big Bore" aluminum shock absorbers |
| Požadované baterie | 4-6S block or 2x2S and 2x3S LiPo batteries with XT90 connector (for vehicle), AA batteries (for transmitter) |
Image: Size comparison of the Asuga XLR 6S Buggy (bottom) with a standard 1/8 Buggy (top), illustrating its larger scale and dimensions (Length: 582mm, Width: 352mm, Height: 210mm).
Záruka a podpora
Informace o záruce a technickou podporu získáte od oficiálního prodejce Corally. website or contact your authorized Corally dealer. Keep your proof of purchase for any warranty claims.