Zavedení
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Luqeeg M5 Electric Bike LCD Screen Meter. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Bezpečnostní informace
- Always ensure the power to your electric bike or scooter is off before installing or removing the LCD meter.
- Nepokoušejte se měřič rozebírat ani upravovat. Mohlo by dojít ke zrušení záruky a poškození.
- Keep the meter away from extreme temperatures and direct sunlight for prolonged periods.
- While the meter is waterproof, avoid submerging it in water.
- Ujistěte se, že jsou všechna připojení bezpečná, abyste předešli problémům s elektrickým proudem.
Konec produktuview
The Luqeeg M5 LCD Screen Meter is designed for electric bikes and scooters, providing essential ride data. It features a clear display, intuitive buttons, and a waterproof design for reliable performance.
Figure 1: Luqeeg M5 LCD Screen Meter mounted on an electric bike.
Komponenty:
- LCD zobrazovací panel: Shows speed, battery level (energy bar), trip distance, and cruise mode indicator.
- Ovládací tlačítka: For operating the meter functions.
- Montážní držák: For securing the meter to the handlebar.
- 5-Pin Connector Cable: For connecting to the electric bike/scooter system.
Nastavení a instalace
Mounting the Meter:
- Identify a suitable location on your electric bike or scooter handlebar. The mounting opening is designed for 31.8mm handlebars and includes an adapter for 22.2mm handlebars.
- Loosen the screws on the mounting bracket.
- Position the meter on the handlebar and tighten the screws securely. Ensure the meter is stable and does not obstruct your view nebo ovládací prvky.
Obrázek 2: Přední a zadní strana view of the meter with mounting bracket and cable.
Elektrické připojení:
- Locate the 5-pin connector cable on your electric bike or scooter.
- Align the 5-pin connector from the Luqeeg M5 meter with the corresponding connector on your vehicle.
- Push the connectors firmly together until they click into place. Ensure the connection is secure and waterproof.
- The meter is compatible with 24V, 36V, 48V, and 60V systems. The default tag is 36V, but it automatically adjusts to the connected voltage.
Obrázek 3: Zadní view of the meter showing cable entry points.
Návod k obsluze
Zapnutí/vypnutí:
- To power on the meter, turn on your electric bike/scooter's main power. The LCD screen should illuminate.
- To power off, turn off your electric bike/scooter's main power. The LCD screen will turn off automatically.
Funkce displeje:
The M5 LCD meter displays the following information:
- Energetická tyčinka: Indicates the current battery charge level.
- Rychlost: Zobrazuje aktuální rychlost jízdy v km/h.
- plavba: Indicates if cruise control is active (if supported by your vehicle).
- Výlet: Displays the distance traveled during the current trip.
- Manuální: May indicate manual assist level or mode.
Obrázek 4: Detailní view of the LCD display showing various metrics.
Funkce tlačítek:
The meter features buttons for navigation and control. Specific functions may vary slightly depending on your electric bike/scooter's controller. Refer to your vehicle's manual for detailed button operations.
- Typically, buttons are used to cycle through display modes (e.g., ODO, TRIP), adjust assist levels, or activate/deactivate cruise control.
Údržba
- Čištění: Otřete obrazovku a tělo měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Vodotěsný design: The meter features a waterproof design, making it suitable for use in rainy conditions. However, avoid high-pressure washing directly on the screen or submerging the unit.
- Kontrola kabelů: Periodically check the 5-pin connector cable for any signs of wear, damage, or loose connections. Ensure the cable is securely routed and not pinched.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Měřič se nezapne. |
|
|
| Nesprávné údaje o rychlosti nebo vzdálenosti. |
|
|
| Displej je tlumený nebo bliká. |
|
|
Specifikace
| Typ položky | Electric Bike LCD Meter |
| Značka | Luqeeg |
| Číslo modelu | M5 (Luqeegg9zkechw1a) |
| Materiál | ABS |
| svtage Kompatibilita | 24V, 36V, 48V, 60V (Universal) |
| Typ konektoru | 5 Pin |
| Montážní otvor | 31.8mm (optional 22.2mm adapter) |
| Hmotnost | 190 gramů |
| Hodnocení voděodolnosti | Waterproof design (avoid submersion) |
Informace o záruce
Luqeeg products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact Luqeeg customer support. Keep your proof of purchase for warranty claims.
Zákaznická podpora
If you have any questions, require technical assistance, or encounter issues not covered in this manual, please contact Luqeeg customer support through the retailer where you purchased the product or visit the official Luqeeg webstránky pro kontaktní informace.