1. Úvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Reznor UDXC-150 Natural Gas Unit Heater. Please read all instructions carefully before attempting to install or operate the unit. Retain this manual for future reference.
Obrázek 1: Přední strana view of the Reznor UDXC-150 Natural Gas Unit Heater. This image displays the front and side view of the Reznor UDXC-150 Natural Gas Unit Heater, showcasing its compact design and air outlet.
2. Bezpečnostní informace
VAROVÁNÍ: Nesprávná instalace, seřízení, úprava, servis nebo údržba může způsobit poškození majetku, zranění nebo smrt. Před instalací nebo servisem tohoto zařízení si důkladně přečtěte pokyny pro instalaci, provoz a údržbu.
- Ensure all local codes and ordinances are followed during installation.
- Instalaci a servis musí provádět kvalifikovaný instalační technik, servisní agentura nebo dodavatel plynu.
- Neskladujte ani nepoužívejte benzín nebo jiné hořlavé výpary a kapaliny v blízkosti tohoto ani jiného spotřebiče.
- Tato jednotka je určena pouze pro vnitřní použití.
3. Nastavení a instalace
The Reznor UDXC-150 unit heater is designed for versatile installation in commercial or industrial spaces. Proper setup is crucial for safe and efficient operation.
3.1 Montáž
The UDXC-150 is equipped with threaded-nut retainers at four suspension points, allowing for ceiling or wall mounting. Mounting brackets and hardware are sold separately and must be appropriate for the unit's weight and the structural integrity of the mounting surface.
Figure 2: Ceiling-mounted Reznor UDXC-150 Unit Heater. The heater is shown installed on a ceiling, illustrating its suspension points. Accompanying text lists features such as Status-Indicating LED Light, 7-Segment Display Board for troubleshooting, 2- and 4-Point Suspension Options, External Gas Connection, and ETL Approval.
3.2 Odvzdušnění
This unit is compatible with category 1 double wall B-vent pipe. Venting can be configured vertically out of a roof or horizontally through a sidewall. Consult local codes for specific venting requirements.
3.3 Připojení plynu
An external gas connection point is provided for ease of maintenance and installation. Ensure all gas connections are leak-free and comply with local regulations. This unit operates on Natural Gas.
3.4 Elektrické zapojení
The unit features an external terminal strip for 24V wiring. All electrical work must be performed by a qualified electrician and adhere to all applicable electrical codes.
Figure 3: Installation of the Reznor UDXC-150 Heater. A worker is shown connecting ductwork to a ceiling-mounted heater. The text emphasizes the unit's suitability for commercial/industrial spaces, corrosion-resistant materials, and quiet, efficient heating.
4. Návod k obsluze
The Reznor UDXC-150 is designed for efficient and quiet heating.
4.1 Počáteční spuštění
- Ensure all gas and electrical connections are secure and verified by a professional.
- Zapněte přívod plynu do jednotky.
- Obnovte elektrické napájení jednotky.
- Set the thermostat to the desired temperature. The unit will initiate its ignition sequence.
4.2 Normální provoz
- The unit features a single-burner design with two BTU outputs, allowing for efficient heating in varying conditions.
- An integrated circuit board with a display and a status-indicating LED provides operational feedback.
- The low static pressure axial fan and power venting system ensure effective air circulation and minimize heat loss.
- The unit operates with low noise due to vibration-isolated fan and venter motors.
Figure 4: Key Features of the Reznor UDXC-150 Unit Heater. This graphic highlights key features including 83% AFUE Efficiency, TCORE2 Titanium-Stabilized Aluminized Steel Heat Exchanger, Multi-Try Direct Spark Ignition, and Low Noise Operation.
5. Údržba
Regular maintenance ensures the longevity and optimal performance of your Reznor UDXC-150 unit heater. All maintenance should be performed by qualified personnel.
5.1 Routine Checks (Monthly/Quarterly)
- Inspect the heat exchanger for any signs of corrosion or damage. The TCORE2 titanium-stabilized aluminized steel heat exchanger is designed for durability.
- Check the fan and motor for unusual noises or vibrations.
- Ujistěte se, že otvory pro přívod a odvod vzduchu nejsou zakryty.
- Verify that the external gas connection is secure and free of leaks.
5.2 Roční servis
- A qualified technician should perform a comprehensive inspection and cleaning of the burner, heat exchanger, and ignition system.
- The updated cabinet structure with a removable front face and hinged access door panel with a quarter-turn latch facilitate easier access for servicing.
- Check and calibrate gas pressure as needed.
- Inspect all electrical connections and wiring.
6. Řešení problémů
The UDXC-150 unit heater includes features to assist with troubleshooting common issues.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Heater does not ignite | No gas supply, electrical issue, ignition fault | Check gas valve, power supply. Consult 7-segment display for error codes. |
| Unit runs but no heat | Gas supply interrupted, burner issue | Verify gas flow. Check burner for obstructions. |
| Neobvyklé zvuky během provozu | Fan imbalance, motor issue, loose components | Inspect fan and motor. Tighten any loose parts. If persistent, contact service. |
| Status LED indicates an error | Specific fault detected by the control board | Refer to the 7-segment display board for specific error codes and consult the full service manual for detailed troubleshooting steps. |
For complex issues or if the problem persists, contact a qualified service technician.
7. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | UDXC-150 |
| Tepelný výkon | 10 000 britských tepelných jednotek (BTU) |
| Typ paliva | Zemní plyn |
| Tepelná účinnost | 83 % |
| Rozměry produktu (D x Š x V) | 48.44 cm x 38.19 cm x 20.13 cm |
| Typ montáže | Ceiling Mount, Wall Mount (brackets sold separately) |
| Typ pokoje | Garage, Warehouse, Commercial/Industrial Spaces |
| Speciální funkce | Energy Efficient, Fast Heating, Low Noise Operation, TCORE2 Titanium-Stabilized Aluminized Steel Heat Exchanger, 7-Segment Display Board |
| Počet rychlostí | 2 |
Figure 5: Dimensions of the Reznor UDXC-150 Unit Heater. This image provides the physical dimensions of the 150,000 BTU unit, including its width, depth, and height, essential for installation planning.
8. Produktová videa
V poskytnutých datech pro vložení do této příručky nebyla nalezena žádná oficiální produktová videa od prodejce.
9. Informace o záruce
Specific warranty details for the Reznor UDXC-150 unit heater are typically provided at the point of purchase or included with the product packaging. Please refer to the warranty card or contact the seller (1HVAC) or Reznor directly for comprehensive warranty terms and conditions.
10. Podpora a kontakt
For technical assistance, parts, or service inquiries, please contact the seller or an authorized Reznor service provider. Ensure you have your model number (UDXC-150) and serial number available when contacting support.
Seller: 1HVAC
Pro další informace můžete navštívit 1HVAC Store on Amazon.
Figure 6: Product Condition and Packaging. This image shows two unit heaters, one from the front and one from the side revealing the fan. Text describes the careful handling in the 1HVAC warehouse and expert packaging to ensure product integrity during transit.