Festool Cordless Compound Miter Saw SYMC 70 EB-Basic User Manual

1. Úvod

This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Festool Cordless Compound Miter Saw SYMC 70 EB-Basic. Please read this manual thoroughly before first use and keep it for future reference.

2. Bezpečnostní pokyny

Vždy dodržujte obecná bezpečnostní upozornění pro elektrické nářadí a místní předpisy. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.

Obecná bezpečnostní upozornění:

• Bezpečnost pracovního prostoru: Udržujte svůj pracovní prostor čistý a dobře osvětlený. Nepořádek nebo tmavé prostory vedou k nehodám.
• Elektrická bezpečnost: Nevystavujte elektrické nářadí dešti nebo mokru. Voda vnikající do elektrického nářadí zvyšuje riziko úrazu elektrickým proudem.
• Osobní bezpečnost: Always wear eye protection, hearing protection, and a dust mask when operating the saw. Secure loose clothing and long hair.
• Použití a péče o nářadí: Netlačte na elektrické nářadí silou. Používejte správné elektrické nářadí pro danou aplikaci. Před prováděním jakýchkoli úprav, výměnou příslušenství nebo skladováním elektrického nářadí odpojte baterii.
• Použití a péče o akumulátorové nářadí: Nabíjejte pouze nabíječkou určenou výrobcem. Používejte elektrické nářadí pouze se speciálně určenými akumulátory.

3. Komponenty přesview

Familiarize yourself with the main components of your Festool SYMC 70 EB-Basic miter saw.

Figure 3.1: The Festool SYMC 70 EB-Basic Cordless Compound Miter Saw shown with its complete set of accessories, including the saw blade, angle transfer tool, and various attachments.

Figure 3.2: The miter saw equipped with optional wheels for enhanced mobility and ease of positioning on the job site.

Obrázek 3.3: Detail view of a hand inserting a battery pack into the saw's battery slot, highlighting the cordless design.

Obrázek 3.4: Detailní view of the saw blade and the integrated LED light for precise cutting line visualization.

4. Nastavení

4.1 Vybalení a kontrola

Carefully remove all components from the packaging. Inspect the saw and accessories for any signs of damage. Report any damage to your dealer immediately.

4.2 Attaching the Saw Blade

1. Ensure the battery is removed from the saw.
2. Stiskněte tlačítko aretace vřetena.
3. Pomocí dodaného klíče povolte upevňovací šroub nože.
4. Carefully remove the old blade (if applicable) and install the new blade, ensuring the rotation direction matches the arrow on the saw.
5. Pevně ​​utáhněte upevňovací šroub nože.

4.3 Instalace baterií

The SYMC 70 EB-Basic operates with two 18V battery packs for optimal power and runtime. Insert fully charged battery packs into the designated slots until they click into place.

4.4 Attaching Mobility Wheels (Optional)

For easy transport and positioning, attach the optional mobility wheels to the base of the saw as shown in Figure 3.2. Ensure they are securely fastened.

Figure 4.1: Close-up of the robust mobility wheels, designed for quick and effortless repositioning of the saw.

5. Návod k obsluze

5.1 Measuring and Transferring Angles

The SYMC 70 EB-Basic features a symmetrical stop system and an angle transfer tool for precise miter cuts. Use the angle transfer tool to accurately measure internal and external angles from your workpiece and transfer them directly to the saw's setting.

Figure 5.1: A user demonstrating the use of the angle transfer tool to measure a corner angle, ensuring accurate cuts.

Figure 5.2: The angle measured is then transferred to the saw's fence system, allowing for precise and symmetrical angle adjustments.

5.2 Provádění řezů

1. Place the workpiece firmly against the fence and the saw table.
2. Adjust the desired cutting angle using the symmetrical stop system.
3. Activate the LED light for cutting line visualization if needed.
4. Hold the workpiece securely with one hand (or use clamps) and operate the saw with the other. The switch and handle are centrally located for left or right-handed operation.
5. Slowly lower the saw blade through the workpiece.
6. Allow the blade to stop completely before raising the saw head.

Figure 5.3: A user making a cut with the saw, demonstrating the integrated dust collection bag for reduced airborne dust.

Figure 5.4: The saw connected to an external mobile dust extraction system for a cleaner and healthier work environment.

5.3 Odstraňování prachu

The SYMC 70 EB-Basic is designed for low-dust operation. You can use the included dust collection bag for basic dust capture, or connect the saw to a mobile dust extractor for superior dust control.

6. Údržba

6.1 Čištění

Regularly clean the saw to ensure optimal performance and longevity. Use a brush or compressed air to remove sawdust and debris from the motor vents, blade guard, and table surface. Do not use solvents or abrasive cleaners.

6.2 Výměna čepele

Replace the saw blade when it becomes dull or damaged. Refer to section 4.2 for detailed instructions on blade replacement. Always use high-quality saw blades specifically designed for your Festool saw and the material being cut.

6.3 Péče o baterii

Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Follow the charging instructions provided with your Festool charger.

7. Řešení problémů

V případě problémů, které zde nejsou uvedeny, se obraťte na zákaznickou podporu Festool nebo na autorizované servisní středisko.

8. Technické specifikace

Note: Product dimensions and weight seem unusually small (1x1x1cm; 8g) based on the provided data. This might be a data entry error in the source. Please refer to official Festool documentation for precise specifications.

9. Záruka a podpora

9.1 All-Inclusive Warranty

Festool offers an "all-inclusive" warranty. After online registration of your new Festool tool within 30 days of purchase, it is fully covered for the first three years. This allows you to concentrate on your work with peace of mind.

Figure 9.1: The Festool "all-inclusive" warranty symbol, representing comprehensive service benefits.

9.2 Zákaznická podpora

For further assistance, technical support, or warranty claims, please visit the official Festool website or contact your local authorized Festool dealer. Always provide your product model number (SYMC 70 EB-Basic) and serial number when seeking support.