Faber 131.0696.212

Faber 2-In-1 Sportz Blender Instruction Manual

Model: 131.0696.212

1. Úvod

Thank you for choosing the Faber 2-In-1 Sportz Blender. This appliance is designed for efficient blending and grinding, offering versatility for various culinary tasks. Please read this manual carefully before using the blender to ensure safe and optimal performance. Keep this manual for future reference.

2. Důležité bezpečnostní pokyny

Při používání elektrických spotřebičů je třeba vždy dodržovat základní bezpečnostní opatření, aby se snížilo riziko požáru, úrazu elektrickým proudem a zranění osob, včetně následujících:

  • Před použitím si přečtěte všechny pokyny.
  • Neponořujte základnu motoru do vody nebo jiných kapalin.
  • Když je jakýkoli spotřebič používán dětmi nebo v jejich blízkosti, je nutný pečlivý dohled.
  • Vytáhněte zástrčku ze zásuvky, když ji nepoužíváte, před montáží nebo demontáží dílů a před čištěním.
  • Vyvarujte se kontaktu s pohyblivými částmi.
  • Neprovozujte žádný spotřebič s poškozenou šňůrou nebo zástrčkou nebo poté, co spotřebič nefunguje správně, upadl nebo byl jakýmkoli způsobem poškozen.
  • Použití příslušenství, které není doporučeno nebo prodáno výrobcem, může způsobit požár, úraz elektrickým proudem nebo zranění.
  • Nepoužívejte venku.
  • Nenechávejte kabel viset přes okraj stolu nebo pultu nebo se dotýkat horkých povrchů.
  • Neumisťujte na horký plynový nebo elektrický hořák nebo do jeho blízkosti nebo do vyhřáté trouby.
  • Vždy nejprve zapojte zástrčku do spotřebiče a poté zapojte kabel do zásuvky. Pro odpojení vypněte jakýkoli ovládací prvek a poté vytáhněte zástrčku ze zásuvky.
  • Nepoužívejte spotřebič k jinému než určenému použití.
  • Čepele jsou ostré. Zacházet opatrně.
  • Ensure the jar is securely locked onto the motor base before operating.

3. Konec produktuview

The Faber 2-In-1 Sportz Blender is designed for convenience and performance, featuring a powerful motor and versatile jars for both blending and grinding.

Komponenty

  • Motorová základna
  • 500ml PC Jar
  • 300ml PC Jar
  • Sestava brusného kotouče
  • Multi Blade Assembly
  • Sipper Cap
  • Flat Lids (2 units)
  • Seasoning Lid (1 unit)
Diagram showing the Faber Sportz Blender components: motor base, 500ml and 300ml jars, grinding blade, multi blade, sipper cap, flat lids, and seasoning lid.

Obrázek 1: Nadview of Faber Sportz Blender components.

Klíčové vlastnosti

  • Výkonný měděný motor o výkonu 400 W: Ensures efficient blending and grinding with high RPM.
  • Detachable Stainless Steel Blades: High-strength blades for wet, dry, and liquidizing tasks.
  • 2 Spill-Proof Jars: Includes 500ml and 300ml Nutria Lock PC jars, designed for reduced heat and friction.
  • Sipper Cap & Lids: Comes with a sipper cap for on-the-go use and multiple lids for storage and seasoning.
  • Swirl Hi-Flow Technology: Optimizes blending performance.
  • Overheat Protector: Integrated safety feature to prevent motor damage.
Faber Sportz Blender with a jar filled with fruits and nuts, ready for blending.

Obrázek 2: Faber Sportz Blender with ingredients in the jar.

4. Nastavení a montáž

Follow these steps to set up your Faber Sportz Blender:

  1. Rozbalit: Opatrně vyjměte všechny součásti z obalu. Obal si uschovejte pro skladování nebo budoucí přepravu.
  2. Čistý: Before first use, wash the jars, blades, and lids with warm soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp tkanina.
  3. Umístění základny motoru: Position the motor base on a stable, flat, and dry surface. Ensure it is near a power outlet.
  4. Připevnění sestavy čepele: Select the appropriate blade assembly (Grinding or Multi Blade) for your task. Screw it onto the open end of the desired jar (500ml or 300ml) until secure.
  5. Fill Jar: Add your ingredients to the jar. Do not overfill beyond the maximum fill line.
  6. Mount Jar: Invert the assembled jar (with blade and ingredients) and place it onto the motor base. Twist clockwise until it locks securely into place.
A hand holding a blender jar with the blade assembly attached, ready to be placed on the motor base.

Obrázek 3: Attaching the blade assembly to the jar.

The blender jar securely mounted onto the motor base, ready for operation.

Obrázek 4: Jar mounted on the motor base.

5. Návod k obsluze

The Faber Sportz Blender is designed for simple operation. Ensure the blender is properly assembled and locked before use.

Obecný provoz

  1. After assembling the jar with ingredients and blade onto the motor base, plug the power cord into a suitable electrical outlet.
  2. To start blending/grinding, press down on the jar. The motor will activate.
  3. To stop, release pressure on the jar. For continuous operation, twist the jar slightly to lock it in the 'on' position (if applicable to your model).
  4. Blend or grind until desired consistency is achieved. Do not operate continuously for more than 60 seconds to prevent overheating. Allow the motor to rest for at least 2 minutes between cycles.
  5. Once finished, unplug the appliance from the power outlet.
  6. Carefully remove the jar from the motor base by twisting counter-clockwise and lifting.
  7. Odšroubujte sestavu čepelí z nádoby.
Illustrations showing the blender being used for liquidizing fruits, milkshakes, and soups; dry grinding spices, grains, and rice; and wet grinding chutneys, sauces, and purees.

Obrázek 5: Versatile uses of the Faber Sportz Blender.

Specifické aplikace

  • Smoothies & Liquidizing: Use the Multi Blade assembly. Add liquids first, then soft ingredients, and finally harder ingredients or ice.
  • Wet Grinding (Chutneys, Pastes): Use the Multi Blade assembly. Add a small amount of liquid if needed to achieve desired consistency.
  • Dry Grinding (Spices, Grains): Use the Grinding Blade assembly. Ensure ingredients are completely dry. Process in short bursts for best results.
Diagram illustrating the swirl hi-flow technology inside the blender jars for efficient mixing of ingredients.

Obrázek 6: Swirl Hi-Flow Technology for optimal blending.

6. Čištění a údržba

Regular cleaning and maintenance will prolong the life of your blender.

  • Always unplug the blender před čištěním.
  • Základna motoru: Otřete základnu motoru reklamouamp tkanina. Neponořujte jej do vody ani jiné kapaliny.
  • Sklenice, čepele a víčka: These parts are dishwasher safe. Alternatively, wash them with warm soapy water, rinse thoroughly, and dry immediately. Be extremely careful when handling the blades as they are sharp.
  • For quick cleaning, fill the jar with warm water and a drop of dish soap, attach the blade, and run the blender for a few seconds. Rinse thoroughly.
  • Pokud mixér nepoužíváte, skladujte jej na suchém místě.
Two clear blender jars with black lids, one larger and one smaller, indicating they are ready for cleaning or storage.

Obrázek 7: Jars and lids are easy to clean.

7. Řešení problémů

Pokud se s mixérem setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení:

ProblémMožná příčinaŘešení
Blender se nespustíNot plugged in; Jar not properly locked; Overheat protector activated.Ensure plug is firmly in outlet; Twist jar clockwise until securely locked; Unplug and let cool for 15-20 minutes before restarting.
Ingredience se nespojí hladceToo little liquid; Overfilled jar; Ingredients too large.Přidejte více tekutiny; Snižte množství ingrediencí; Nakrájejte ingredience na menší kousky.
Zápach spáleniny z motoruPřetížení; Příliš dlouhý nepřetržitý provoz.Reduce load; Do not operate for more than 60 seconds continuously. Allow motor to rest. If smell persists, contact customer support.
Únik z nádobyBlade assembly not tightened; Seal ring improperly placed or damaged.Ensure blade assembly is tightly screwed onto the jar; Check seal ring for proper placement and damage. Replace if damaged.

8. Specifikace

FunkceDetail
ZnačkaFaber
Číslo modelu131.0696.212
BarvaČerná/Stříbrná
Wattage400 wattů
svtage220 voltů
Počet rychlostí2
Kapacita1 Liter (combined jar capacity)
Rozměry produktu (D x Š x V)19H x 12Š x 25V centimetrů
Hmotnost položky1450 gramů
Typ materiáluPlastic (ABS Body)
Materiál čepeleNerez
Díly vhodné do myčkyJars, Blades, Lids
Zdroj napájeníElektrický kabel
Země původuČína
Diagram showing the dimensions of the Faber Sportz Blender: 250mm height and 120mm width.

Obrázek 8: Rozměry produktu.

9. Záruka a podpora

Your Faber 2-In-1 Sportz Blender comes with a 1letá omezená záruka od data nákupu. Tato záruka se vztahuje na výrobní vady vzniklé při běžném používání v domácnosti.

For warranty claims, service, or technical support, please contact Faber customer service:

  • Kontakt na zákaznický servis: 1800-209-3484
  • Adresa výrobce: Franke Faber India Pvt Ltd, 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIE.

Uschovejte si prosím účtenku jako doklad o koupi pro účely ověření záruky.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.