WOLTU BH372sz-2 Bar Stool Set - Black Velvet Instruction Manual

1. Konec produktuview

This manual provides instructions for the assembly, use, and maintenance of your WOLTU BH372sz-2 Bar Stool Set. These bar stools are designed for comfort and stability, featuring a soft velvet seat, backrest, footrest, and armrests, supported by a robust metal frame.

Image: Two black velvet bar stools positioned at a kitchen island, showcasing their design and intended use.

2. Bezpečnostní informace

Před montáží a použitím si pečlivě přečtěte všechna bezpečnostní varování a pokyny. Nedodržení těchto pokynů může vést ke zranění nebo poškození výrobku.

• Hmotnostní limit: Do not exceed the maximum weight capacity of 120 kg (approximately 264 lbs) per stool.
• Stabilní povrch: Always use the bar stools on a flat, stable, and level surface to prevent tipping.
• Shromáždění: Před použitím se ujistěte, že jsou všechny šrouby a spojovací prvky bezpečně utažené. Pravidelně kontrolujte a v případě potřeby dotahujte.
• Děti: Keep children away from the assembly area. Do not allow children to climb or play on the stools.
• Hnutí: Do not drag the stools across the floor. Lift them to move to prevent damage to the floor and the stool legs.

3. Obsah balení

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact WOLTU customer service.

• Velvet Seat with Backrest and Armrests (2 units)
• Metal Leg Frame (2 units)
• Footrest Bars (4 units)
• Montážní materiál (šrouby, podložky, imbusový klíč)
• Návod k použití (tento dokument)

Image: A detailed diagram illustrating the dimensions of the bar stool, including seat height, overall height, and base width.

4. Montážní návod

Assembly is required for this product. It is recommended to assemble the stools on a soft, clean surface to prevent scratches. Two people may be helpful for certain steps.

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a položte je na čistý, měkký povrch. Zkontrolujte seznam obsahu balení.
2. Připevnění sedadla k rámu: Align the seat (A) with the top of the metal leg frame (B). Secure the seat to the frame using the provided screws and washers. Do not fully tighten the screws yet.
3. Install Footrest Bars: Insert the footrest bars (C) into the designated slots on the metal leg frame. Ensure they are properly seated.
4. Utáhněte všechny šrouby: Once all components are loosely assembled, place the stool upright on a level surface. Apply gentle pressure to the seat to ensure it is stable, then progressively tighten all screws using the Allen key until they are secure. Do not overtighten.
5. Kontrola stability: After tightening, gently rock the stool to ensure it is stable and does not wobble. If it wobbles, loosen the screws slightly, adjust, and re-tighten.

Image: An exploded diagram showing the individual components of the bar stool and the sequence of assembly steps.

Obrázek: Detail view of the bottom of a metal leg, highlighting the anti-slip and anti-scratch pad designed to protect flooring.

5. Použití a provoz

The WOLTU bar stools are designed for comfortable seating at kitchen islands, bars, or high tables.

• sezení: Pro optimální rovnováhu a pohodlí seďte uprostřed sedadla.
• Opěrka nohou: Utilize the integrated footrest to support your feet and enhance comfort, reducing pressure on your legs.
• Hnutí: When moving the stool, always lift it slightly off the ground to prevent scratching floors and damaging the leg pads.

Obrázek: Side profile of the bar stool, illustrating its ergonomic design with a supportive backrest and armrests for comfortable seating.

Image: A close-up of the velvet seat, with a hand pressing into the cushion to demonstrate its softness and comfort.

6. Péče a údržba

Proper care will extend the life and appearance of your WOLTU bar stools.

• Čištění sametu: For general cleaning, gently vacuum the velvet fabric using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first.
• Čištění kovového rámu: Kovové nohy otřete měkkým hadříkem.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, které by mohly poškodit povrchovou úpravu.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené. V případě potřeby je dotáhněte pro zachování stability.
• Vyhněte se přímému slunečnímu záření: Prolonged exposure to direct sunlight can cause fading of the velvet fabric. Position stools away from direct sunlight when possible.

7. Řešení problémů

If you encounter any issues with your bar stools, refer to the following common solutions:

• Stool Wobbles: Ensure the stool is on a flat surface. Check all assembly screws and tighten them evenly. Loosen slightly, press down on the seat, and re-tighten if necessary.
• Vrzavé zvuky: Squeaking can often be resolved by re-tightening all assembly screws. If the issue persists, disassemble and reassemble, ensuring all parts are correctly aligned.
• Obtížnost sestavení: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. Do not force parts together. If a part seems ill-fitting, double-check its orientation.

Pokud tyto kroky problém nevyřeší, obraťte se prosím na zákaznickou podporu WOLTU.

8. Specifikace produktu

9. Záruka a zákaznická podpora

WOLTU products are designed for quality and durability. For information regarding warranty coverage, please refer to the purchase documentation or contact WOLTU customer service directly.

If you require assistance with assembly, missing parts, or have any questions about your product, please contact:

WOLTU GmbH Customer Service
Webmísto: Obchod WOLTU na Amazonu
Please have your model number (BH372sz-2) and purchase date available when contacting support.