YoLink 6 Foot Pendant Type Float Switch Water Level Monitoring Sensor User Manual

1. Konec produktuview

The YoLink Pendant Type Float Switch is an accessory designed for water level monitoring. It functions as a contact sensor, detecting changes in water levels through physical contact. This device integrates seamlessly with the YoLink ecosystem, providing timely alerts for water level changes when connected to a YoLink Hub and other compatible devices.

Image 1.1: YoLink Pendant Type Float Switch Sensor. This image displays the compact, white float switch with its attached cable.

2. Obsah balení

• YoLink Pendant Type Float Switch (6-foot cable)
• Uživatelská příručka

3. Nastavení a instalace

Before installation, ensure you have a YoLink Hub and the YoLink app installed on your smartphone. The float switch requires a YoLink Hub for full functionality and alerts.

3.1 Pairing with YoLink Hub

1. Open the YoLink app and log in to your account.
2. Klepnutím na ikonu „+“ přidáte nové zařízení.
3. Follow the on-screen instructions to scan the QR code on your float switch or manually enter the device ID.
4. Once paired, assign the device to a room and give it a descriptive name.

3.2 Mounting the Float Switch

The float switch is designed for pendant mounting. It can be suspended at the desired water level to detect rising or falling water.

• Identify the area where water level monitoring is required (e.g., sump pump pit, basement floor, under a sink).
• Securely suspend the float switch using its cable at the specific height where water detection is needed. Ensure the float can move freely.
• The 6-foot cable allows for flexible placement within a 6-foot radius from its connection point.

Obrázek 3.1: Příkladample installation of a YoLink water sensor under a kitchen sink. The float switch can be similarly placed to monitor water levels.

3.3 Instalace baterie

The device is battery-powered and uses Alkaline batteries. Refer to the device's battery compartment for specific battery type and installation instructions. Ensure correct polarity when inserting batteries.

4. Provoz

The YoLink Float Switch operates as a contact sensor. When the float detects a change in water level, it triggers an alert.

• Detekce vody: The float mechanism rises or falls with the water level. When it reaches a predefined position (typically indicating high water), the sensor activates.
• Upozornění: Upon activation, the sensor sends a signal to your YoLink Hub. The Hub then relays this information to your YoLink app, triggering notifications (e.g., push notifications, emails, SMS, depending on your app settings).
• Způsob ovládání: The sensor itself is controlled via touch for basic functions like pairing or resetting, as indicated by its specifications. All monitoring and alert configurations are managed through the YoLink app.
• YoLink Ecosystem Integration: This sensor can be integrated with other YoLink devices and accessories. For example, a water level alert could trigger a YoLink valve to shut off water supply (if a YoLink valve controller is installed).

5. Údržba

5.1 Výměna baterie

The float switch is powered by Alkaline batteries. When the battery level is low, you will receive a notification via the YoLink app. Replace batteries promptly to ensure continuous operation. Refer to the device for specific battery type and replacement instructions.

5.2 Čištění

Periodically inspect the float switch for any debris or buildup that might hinder its movement. Clean the device gently with a soft, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní materiály.

6. Řešení problémů

• Zařízení nereaguje:
  • Check battery level in the YoLink app. Replace batteries if low.
  • Ensure the device is within range of your YoLink Hub. YoLink devices use LoRa technology for extended range, but extreme distances or obstructions can affect connectivity.
  • Verify your YoLink Hub is online and functioning correctly.
  • Attempt to re-pair the device with the YoLink Hub if connectivity issues persist.
• Nebyla přijata žádná upozornění:
  • Confirm that notification settings are correctly configured in the YoLink app for the specific device.
  • Test the float switch manually by simulating a water level change to ensure it triggers.
  • Check your phone's notification settings to ensure the YoLink app is permitted to send alerts.
• Inaccurate Water Level Detection:
  • Inspect the float mechanism for any obstructions or debris that might prevent free movement.
  • Ensure the float switch is mounted correctly and securely at the desired detection level.
• Offline Functionality (D2D):

  YoLink devices support Device-to-Device (D2D) control, meaning essential actions like leak-to-shutoff can still function even without internet or power to the Hub, provided the devices are within range of each other and configured for D2D. However, app notifications require the Hub to be online and connected to the internet.

7. Specifikace

8. Záruka a podpora

8.1 Informace o záruce

YoLink products typically come with a limited warranty. For detailed warranty terms and conditions, please refer to the official YoLink webwebu nebo záruční kartu, která byla přiložena k vašemu nákupu. Uschovejte si doklad o koupi pro případ reklamace.

8.2 Technická podpora

For technical assistance, troubleshooting, or further inquiries, please contact YoLink customer support. You can usually find contact information (phone, email, support portal) on the official YoLink webmísto: www.yosmart.com/support