Lexar NM790 SSD User Manual

Zavedení

This manual provides essential information for the installation, operation, and maintenance of your Lexar NM790 M.2 2280 PCIe Gen 4x4 NVMe SSD. Designed for high-performance computing, this SSD offers exceptional speed and efficiency for various applications, including gaming and content creation. It is compatible with desktop computers, laptops, and PlayStation 5 consoles.

Co je v krabici

• Lexar NM790 SSD

Nastavení

General Installation Guidelines (Desktop/Laptop)

Before beginning installation, ensure your system is powered off and unplugged. Refer to your computer's motherboard or laptop's service manual for specific M.2 slot locations and installation procedures. Always handle the SSD by its edges to avoid static discharge.

1. Najděte na své základní desce volný slot M.2.
2. Gently insert the Lexar NM790 SSD into the M.2 slot at a slight angle.
3. Press down the SSD and secure it with the provided screw (usually included with your motherboard/laptop).
4. Zavřete skříň počítače a znovu připojte napájení.

Image: The Lexar NM790 M.2 2280 PCIe Gen4 NVMe SSD, a compact solid-state drive designed for high-speed data transfer.

Kompatibilita s PlayStation 5

The Lexar NM790 SSD is compatible with PlayStation 5 consoles for storage expansion. Ensure your PS5 system software is up to date before installation. For detailed PS5 installation instructions, please refer to the official PlayStation support documentation.

Image: The Lexar NM790 SSD shown with a PlayStation 5 controller, indicating its compatibility with the PS5 console.

Ovládání SSD disku

Initialization and Formatting

After physical installation, the SSD needs to be initialized and formatted before use. This process varies slightly depending on your operating system (Windows, macOS, Linux) or console (PS5). Generally, you will access Disk Management (Windows), Disk Utility (macOS), or the PS5 storage settings to prepare the drive.

Výkonové charakteristiky

The Lexar NM790 SSD leverages PCIe Gen4x4 NVMe technology, Host Memory Buffer (HMB) 3.0, and Dynamic SLC Cache to deliver high-speed performance. Expect sequential read speeds up to 7400MB/s and sequential write speeds up to 6500MB/s. Actual performance may vary based on system configuration and workload.

Image: A graph illustrating the Lexar NM790 SSD's performance, showing it is significantly faster than PCIe Gen3 SSDs.

Image: An illustration highlighting the Host Memory Buffer 3.0 feature of the Lexar NM790 SSD, which enhances data transfer speeds.

Údržba

Solid State Drives generally require less maintenance than traditional hard drives. However, to ensure optimal performance and longevity:

• Aktualizace firmwaru: Periodically check the Lexar official website for any available firmware updates for your NM790 SSD. Firmware updates can improve performance, stability, and compatibility.
• Příkaz TRIM: Ensure your operating system has TRIM enabled. TRIM helps the SSD manage its data more efficiently, preventing performance degradation over time. Most modern operating systems enable TRIM by default for SSDs.
• Vyhněte se plné kapacitě: I když SSD disky fungují dobře i při téměř plném zaplnění, ponechání volného místa (např. 10–15 %) může pomoci udržet optimální výkon a prodloužit životnost disku.

Odstraňování problémů

If you encounter issues with your Lexar NM790 SSD, consider the following common troubleshooting steps:

• SSD nezjištěno:
  • Ověřte, zda je SSD disk správně usazen ve slotu M.2.
  • Check your system's BIOS/UEFI settings to ensure the M.2 slot is enabled and configured correctly (e.g., NVMe mode).
  • Ujistěte se, že máte aktuální ovladače základní desky.
  • For PS5, ensure the SSD is fully inserted and the cover is properly secured.
• Pomalý výkon:
  • Confirm your system supports PCIe Gen4. If connected to a Gen3 slot, performance will be limited to Gen3 speeds.
  • Check if TRIM is enabled (as mentioned in Maintenance section).
  • Ujistěte se, že ovladače vašeho systému (čipová sada, NVMe) jsou aktuální.
  • Monitor SSD temperature. Excessive heat can cause thermal throttling, reducing performance.
• Poškození/chyby dat:
  • Spusťte utilitu pro kontrolu disku (např. chkdsk on Windows).
  • Ensure proper shutdown procedures are followed to prevent data loss.
  • Consider updating SSD firmware.

If issues persist, contact Lexar customer support for further assistance.

Specifikace

Záruka a podpora

The Lexar NM790 SSD comes with a Pětiletá omezená záruka. For warranty claims, technical support, or additional product information, please visit the official Lexar support webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro ověření záruky.

Online podpora: www.lexar.com/support