Turing TP-MMD4MV2 Smart Series TwilightVision 4MP IR Zoom Dome IP Camera User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Turing TP-MMD4MV2 Smart Series TwilightVision 4MP IR Zoom Dome IP Camera. This advanced surveillance camera features a 2.7-13.5mm motorized varifocal lens, Smart IR illumination up to 40m (131ft), and TwilightVision technology for optimal image clarity in low-light conditions. It supports up to a 256GB MicroSD card for edge storage and is designed for outdoor use with IP67 weather resistance and IK10 vandal resistance. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

Figure 1: Turing TP-MMD4MV2 Smart Series TwilightVision 4MP IR Zoom Dome IP Camera. This image shows the white dome camera with its protective casing.

2. Bezpečnostní informace

Dodržujte prosím následující bezpečnostní opatření, abyste předešli zranění nebo poškození produktu:

• Elektrická bezpečnost: Ensure power supply meets the camera's requirements (DC 12V+/-25% or PoE IEEE 802.3af). Do not overload power outlets.
• Instalace: Installation should be performed by qualified personnel. Mount the camera securely to prevent it from falling.
• Prostředí: Do not expose the camera to extreme temperatures, humidity, or corrosive environments beyond its specified operating conditions.
• Čištění: K čištění používejte měkký, suchý hadřík. Nepoužívejte silné čisticí prostředky ani abrazivní materiály.
• Demontáž: Nepokoušejte se kameru rozebírat ani upravovat. Zrušíte tak platnost záruky a může dojít k jejímu poškození.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Turing TP-MMD4MV2 IP Dome Camera
• Mounting Screw Kit (screws, wall anchors)
• Vodotěsný konektor pro ethernetový kabel
• Šablona cvičení
• Stručný průvodce / Uživatelská příručka (tento dokument)

Note: A MicroSD card and DC 12V power adapter are not included and must be purchased separately if not using Power over Ethernet (PoE).

4. Konec produktuview

The TP-MMD4MV2 camera is designed for robust outdoor surveillance, offering high-resolution imaging and intelligent features.

4.1 Klíčové vlastnosti

• Rozlišení 4 megapixelů: Captures video at 2688x1520 pixels at 30/25fps.
• Motorizovaný varifokální objektiv: 2.7-13.5mm lens with auto-focus for flexible viewing úhly.
• TwilightVision Technology: Enhances image clarity in extremely low-light conditions (down to 0.002 Lux).
• Chytré IR: Infrared illumination up to 40 meters (131 feet) for clear night vision.
• People and Vehicle Search: Advanced analytics when used with Turing SMART series NVRs and Turing Vision Cloud.
• Vestavěný mikrofon: Pro monitorování zvuku.
• Edge Storage: Supports up to 256GB MicroSD card (not included).
• Odolný design: IP67 weather-rated and IK10 vandal-resistant.
• Možnosti napájení: Supports Power over Ethernet (PoE) and DC 12V.

4.2 Součásti kamery

The camera consists of the main dome unit, a mounting base, and various ports. While a specific diagram is not provided, typical components include:

• Kryt kopule: Protective, vandal-resistant casing.
• Modul kamery: Contains the lens, image sensor, and IR LEDs.
• Ethernetový port (RJ45): For network connection and PoE.
• Vstup DC napájení: For optional 12V DC power supply.
• Resetovací tlačítko: Obnovení továrního nastavení.
• Slot pro microSD kartu: Located internally, accessible by removing the dome cover.

Figure 2: Illustrative diagram of camera components (image not available). This diagram would typically show the external parts of the dome camera, including the lens, IR LEDs, and the location of the cable connections and reset button.

5. Nastavení a instalace

Pro správnou instalaci kamery postupujte podle těchto kroků.

5.1 Montáž fotoaparátu

1. Vyberte umístění: Select a suitable outdoor location for wall mounting, ensuring a clear field of view and within range of your network cable. The camera is IP67 and IK10 rated for outdoor use.
2. Připravte povrch: Use the provided drill template to mark the screw holes on the mounting surface. Drill pilot holes as indicated.
3. Zajistěte základnu: Attach the camera's mounting base to the surface using the supplied screws and wall anchors.
4. Správa kabelů: Route the Ethernet cable through the mounting base or side cable entry point. Use the waterproof connector for outdoor installations to protect the RJ45 connection.

Figure 3: Illustrative diagram of camera mounting (image not available). This diagram would show the steps for securing the camera base to a wall or ceiling, including drilling and cable routing.

5.2 Napájení kamery

Kamera může být napájena dvěma způsoby:

• Napájení přes Ethernet (PoE): Connect an Ethernet cable from a PoE-enabled switch or NVR to the camera's RJ45 port. This provides both power and data.
• Napájecí adaptér 12 V stejnosměrného proudu: If PoE is not available, connect a 12V DC power adapter (not included) to the camera's DC power input. Then, connect an Ethernet cable for data transmission.

5.3 Síťové připojení

Connect the camera to your network via an Ethernet cable. The camera supports Ethernet connectivity. While 'Wireless Communication Technology: Wi-Fi' is listed in some specifications, the primary and most robust connection method for this model is wired Ethernet, especially for PoE. For initial setup, a wired connection is recommended.

5.4 Instalace karty MicroSD

To install a MicroSD card for local storage (up to 256GB):

1. Vypnout: Disconnect power from the camera before proceeding.
2. Remove Dome Cover: Carefully twist and remove the outer dome cover to access the internal components.
3. Vložte MicroSD kartu: Locate the MicroSD card slot and gently insert the card until it clicks into place.
4. Replace Dome Cover: Reattach the dome cover, ensuring it is securely sealed to maintain weather resistance.

Figure 4: Illustrative diagram of MicroSD card slot location (image not available). This diagram would show the internal view of the camera with the dome cover removed, highlighting the MicroSD card slot.

6. Ovládání fotoaparátu

Once installed and powered, the camera can be accessed and configured.

6.1 Počáteční přístup a konfigurace

The camera is designed to integrate with Turing SMART NVRs (TR-MR(P) models) and the Turing Vision Cloud for full functionality, including People and Vehicle Search. Refer to your NVR's manual or Turing Vision Cloud documentation for specific integration steps.

• Network Discovery: Use Turing's network discovery tool to find the camera's IP address on your network.
• Web Rozhraní: Přístup k fotoaparátu web rozhraní přes a web browser using its IP address. Log in with default credentials (refer to the Quick Start Guide for defaults).
• Změnit heslo: Z bezpečnostních důvodů ihned po prvním přihlášení změňte výchozí heslo.
• Nastavení sítě: Configure IP address, subnet mask, and gateway if necessary.

6.2 Adjusting the Motorized Lens

The 2.7-13.5mm motorized varifocal lens allows you to remotely adjust the zoom and focus:

• Přístup k živému přenosu z kamery view through the NVR interface or web prohlížeč.
• Locate the zoom and focus controls.
• Upravte zoom pro dosažení požadovaného pole view. The camera will automatically adjust focus (AF).

6.3 Smart IR and TwilightVision

The camera automatically switches between day and night modes. Smart IR adjusts the intensity of the infrared LEDs to prevent overexposure of close-up objects, ensuring balanced illumination up to 40m (131ft). TwilightVision technology provides enhanced color images in extremely low-light conditions before switching to IR mode.

6.4 Nahrávání a ukládání

• Nahrávání z NVR: Configure recording schedules and motion detection settings on your Turing SMART NVR.
• Nahrávání na kartu MicroSD: If a MicroSD card is installed, configure event-triggered or continuous recording via the camera's web rozhraní.
• Kódování videa: The camera supports Ultra 265, H.265, H.264, and MJPEG video encoding formats.

6.5 Monitorování zvuku

The built-in microphone captures audio. Ensure audio recording is enabled in the camera's settings if desired. Audio compression uses G.711.

7. Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho fotoaparátu.

• Čištění: Periodically clean the dome cover with a soft, damp cloth to remove dust, dirt, or water spots that may affect image quality. Do not use harsh chemicals.
• Aktualizace firmwaru: Check the Turing website for the latest firmware updates. Regularly updating firmware can improve performance, add features, and enhance security. Follow the provided instructions carefully during updates.
• Kontrola kabelů: Periodically inspect all cables and connections for wear, damage, or corrosion, especially for outdoor installations.
• Kontroly vlivů na životní prostředí: Ensure the camera's environment remains within its operating temperature and humidity ranges.

8. Řešení problémů

Běžné problémy a jejich řešení naleznete v následující tabulce.

9. Specifikace

Detailed technical specifications for the Turing TP-MMD4MV2 camera:

10. Informace o záruce

Turing products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the official Turing webwebu nebo záruční kartu dodanou s vaším produktem. Uschovejte si doklad o koupi pro případ reklamace.

11. Zákaznická podpora

If you encounter any issues or have questions not covered in this manual, please contact Turing customer support:

• Webmísto: Visit the official Turing webweb s nejčastějšími dotazy, zdroji podpory a kontaktními informacemi.
• Technická podpora: Contact details for technical assistance can typically be found on the manufacturer's webna webu nebo v obalu vašeho produktu.

12. Produktová videa

V produktových datech pro vložení do této příručky nebyla od prodejce poskytnuta žádná oficiální produktová videa.