Zavedení
This manual provides detailed instructions for the safe and effective use of your BORUIT V3 and V7 EDC flashlights. Please read this manual thoroughly before operation to ensure proper functionality and longevity of your devices.
Nastavení
Nabíjení svítilen
Both BORUIT V3 and V7 flashlights are equipped with a Type-C charging port. Before first use, or when the battery is low, charge the flashlight using a standard USB-C cable and a compatible power source.
- Connect the Type-C cable to the flashlight's charging port.
- Connect the other end of the cable to a USB power adapter or a computer's USB port.
- For the V7 flashlight, a red light will flash during charging, and a green light will indicate a full charge.
- The V3 flashlight has a battery indicator display that shows charging status.
Image: BORUIT V3 flashlight charging via Type-C cable, with a red indicator light visible.
Image: BORUIT V7 flashlight and its Type-C charging cable.
Návod k obsluze
BORUIT V3 Flashlight Operation
The BORUIT V3 flashlight features 12 lighting modes, including 5 main light modes and 7 side light modes.
Hlavní světelné režimy:
- Super Bright
- Vysoké světlo
- Středně jasný
- Nízké osvětlení
- Hospodářský
Režimy bočního světla:
- Bílé světlo
- UV světlo
- Červené světlo
- Záblesk červeného světla
- Red Blue Light Flash
Operating the V3 Main Light:
- Zapnout/Vypnout: Press the main light switch button to turn on. Release to turn off.
- Změnit režimy: Double-click the main light switch button to cycle through modes.
- Turn Off from Mode: Press and hold the main light switch button to turn off.
Operating the V3 Side Light:
- Bílé světlo: Long press the side light switch to turn on the white light. Long press again to turn it off.
- Red-Blue Flash: Click the side light switch three times to activate the red-blue flash.
- Změnit režimy: Double-click the side light switch to cycle through other side light modes.
- Turn Off from Mode: Press and hold the side light switch to turn off.
Image: BORUIT V3 flashlight lighting modes and operation guide.
BORUIT V7 Flashlight Operation
The BORUIT V7 flashlight features 3 powerful LED lights and multi-color side lights. Specific mode cycling instructions are similar to the V3 model, typically involving single clicks, double clicks, and long presses of the power button to cycle through brightness levels and special modes.
Magnetic Tail and Clip:
The V7 flashlight includes a magnetic tail, allowing it to be attached to metallic surfaces for hands-free operation. A clip on the back enables secure attachment to pockets, straps, or hats.
Image: BORUIT V7 flashlight demonstrating its ultra-light and portable design with clip and keychain.
Image: BORUIT V7 flashlight utilizing its magnetic adsorption feature.
Údržba
To ensure optimal performance and extend the lifespan of your BORUIT flashlights, follow these maintenance guidelines:
- Čištění: Otřete tělo svítilny měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Voděodolnost: The V3 is IP65 waterproof, and the V7 is IPX5 waterproof. While resistant to splashes and rain, avoid submerging the flashlights in water for extended periods. Ensure the charging port cover is securely closed to maintain water resistance.
- Skladování: Store the flashlights in a cool, dry place away from direct sunlight and extreme temperatures. If storing for a long period, ensure the battery is partially charged (around 50%) to prevent deep discharge.
- Péče o baterie: Pravidelně baterii dobíjejte, i když ji nepoužíváte často, abyste ji udrželi v dobrém stavu.
Image: BORUIT V3 flashlight demonstrating IP65 outdoor waterproof capability.
Odstraňování problémů
If you encounter issues with your BORUIT flashlight, refer to the following common troubleshooting steps:
- Svítilna se nezapíná:
- Ensure the battery is charged. Connect to a charger and check the indicator light.
- Verify that the power button is being pressed correctly according to the operating instructions (e.g., single press, double-click, long press).
- Výstup tlumeného světla:
- Baterie může být vybitá. Dobijte baterku.
- Ensure the flashlight is not in an economic or low-power mode. Cycle through the modes to a brighter setting.
- Problémy s nabíjením:
- Check the charging cable and adapter for damage. Try a different cable or power source.
- Ensure the Type-C cable is fully inserted into the charging port.
Specifikace
BORUIT V3 Flashlight
| Parametr | Detail |
|---|---|
| Materiál | PC + 304 Stainless Steel |
| Lumeny | 900 LM |
| Světelný zdroj | LED |
| Režimy osvětlení | 12 (5 hlavní, 7 vedlejší) |
| Světlá barva | UV, White, Red, Blue Light |
| Typ nabíjení | TYP-C |
| Vodotěsná třída | IP65 |
| Vzdálenost ozařování | 100 metrů |
| Velikost produktu | 15 mm * 31 mm * 56 mm |
BORUIT V7 Flashlight
| Parametr | Detail |
|---|---|
| Zdroj osvětlení | LED 3 * |
| Lamp Luminous (lm) | 1100lm |
| Vzdálenost paprsku | 100 metrů (328 stop) |
| Kapacita baterie | 800mAh polymerní lithiová baterie |
| Vstup | 5V |
| Doba nabíjení | 3 hodiny |
| Indikátor nabíjení | Red light flash (charging), Green light (full) |
| Materiál pláště | Hliníková slitina |
| Vodotěsná třída | IPX5 |
| Režim nabíjení | USB-C |
| Čistá hmotnost | 52 g |
| Velikost produktu | 64 mm * 37.5 mm * 21 mm |
Záruka a podpora
Your BORUIT V3 and V7 flashlights come with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty information provided at the time of purchase or contact BORUIT customer service directly through their official webwebu nebo autorizovaných prodejců.
Pro další pomoc prosím navštivte BORUIT Store on Amazon.