Alpine S2-S69

Alpine S2-S69 Next-Generation S-Series 6x9 Coaxial Speaker Set Instruction Manual

1. Úvod

This manual provides essential information for the proper installation, operation, and maintenance of your Alpine S2-S69 Next-Generation S-Series 6x9 Coaxial Speaker Set. The S2-S69 speakers are designed to deliver high-resolution audio with reliable performance and immersive bass, featuring a 6x9-inch woofer and integrated 1-inch tweeters. Please read this manual thoroughly before attempting installation or operation.

2. Co je v krabici

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

  • S2-S69 owner's manual
  • Dva 2-pásmové reproduktory
  • 2 Bottom mount brackets
  • Two 12'' Lengths of speaker wire
  • Eight 1-1/8'' Screws
  • Eight M4x60mm Machine screws
  • Eight M4 Nuts
  • 8 rychlých klipů
  • 16 ploché podložky
  • 8 spacery
  • Informace o záruce
  • Online product registration information

3. Nastavení a instalace

Proper installation is crucial for optimal performance and longevity of your speakers. It is highly recommended that installation be performed by a qualified professional. Refer to the detailed wiring diagrams and mounting instructions provided in the included S2-S69 owner's manual for specific vehicle applications.

3.1 Pokyny pro montáž

The S2-S69 speakers are designed for door mount applications. Ensure adequate clearance for the speaker depth and diameter. The overall dimensions are approximately 5.6 inches (D) x 10.9 inches (W) x 15.8 inches (H).

Alpine S2-S69 speaker with dimensions labeled: 5.6 inches depth, 10.9 inches width, 15.8 inches length.

Figure 1: Alpine S2-S69 speaker with key dimensions.

For additional protection against potential damage, the KTE-S69G Speaker Grille (sold separately) is compatible with this speaker set.

3.2 Zapojení

Connect the speakers to your car audio system using the provided speaker wire. Ensure correct polarity (+ to + and - to -) to prevent phase issues that can negatively impact sound quality. Refer to your head unit or amplifier manual for specific wiring instructions.

Zadní view of the Alpine S2-S69 coaxial speaker, showing the magnet and wiring terminals.

Obrázek 2: Zadní view of the Alpine S2-S69 speaker, highlighting wiring terminals.

4. Návod k obsluze

Once properly installed, your Alpine S2-S69 speakers are ready for use. These speakers are designed to deliver a high-fidelity audio experience.

4.1 Přehrávání zvuku

Connect your audio source (e.g., smartphone, tablet, MP3 player, car head unit) to your car's audio system. The S2-S69 speakers will reproduce sound from the connected source. Adjust volume levels gradually to avoid sudden loud outputs.

4.2 Funkce kvality zvuku

  • Certifikace pro Hi-Res Audio: The speakers are certified for Hi-Res Audio, supporting frequencies up to 40kHz for a detailed and natural listening experience.
  • HAMR Surround: Alpine's High Amplitude Multi-Roll (HAMR) Surround technology allows for maximum cone movement, contributing to powerful and precise bass reproduction.
  • Clean, Accurate Audio: The construction utilizes Poly Propylene, Glass Fiber, and Mica Cone materials for high output and low distortion, ensuring clear sound reproduction.
Close-up of the Alpine S2-S69 speaker cone and surround, illustrating the clean audio design.

Figure 3: Speaker cone and surround detail for clean audio.

Přední view of the Alpine S2-S69 coaxial speaker, showing the tweeter and woofer cone.

Obrázek 4: Přední strana view of the Alpine S2-S69 speaker.

5. Údržba

To ensure the longevity and optimal performance of your Alpine S2-S69 speakers, follow these simple maintenance guidelines:

  • Čištění: Gently wipe the speaker grilles and cones with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the speaker materials.
  • Inspekce: Periodically inspect the speaker surrounds and cones for any signs of damage, such as tears or cracks. Check wiring connections to ensure they remain secure.
  • Prostředí: While the speakers are durable, avoid exposing them to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture. Note that the product is not waterproof.

6. Řešení problémů

If you encounter issues with your Alpine S2-S69 speakers, refer to the following common troubleshooting steps:

6.1 No Sound from Speakers

  • Zkontrolujte připojení: Ensure all speaker wires are securely connected to both the speakers and the amplifier/head unit. Verify correct polarity.
  • Moc: Confirm that your car audio system (head unit, amp(záložní zdroj) je zapnutý a funguje správně.
  • Zdrojová jednotka: Check the audio source (radio, CD, Bluetooth device) to ensure it is playing and not muted.
  • AmpNastavení čističky: Pokud používáte externí amplifier, check its power, gain, and crossover settings. Ensure the amplifier is not in protection mode.

6.2 Zkreslený nebo nejasný zvuk

  • Úroveň hlasitosti: Reduce the volume on your head unit or amplifier. Distortion often occurs when the audio signal is overdriven.
  • Nastavení zesílení: Upravte nastavení zesílení na vašem ampPokud je zesílení nastaveno příliš vysoko, může to způsobit zkreslení.
  • Nastavení ekvalizéru: Review your head unit's or amplifier's equalizer settings. Excessive bass or treble boost can lead to distortion.
  • Zapojení: Inspect speaker wires for any frayed strands or short circuits.
  • Fyzické poškození: Visually inspect the speaker cones and surrounds for any physical damage.

6.3 Weak or Missing Bass

  • Polarita: Incorrect wiring polarity can cause bass cancellation. Double-check that all speakers are wired with correct positive and negative connections.
  • Nastavení přechodu: Pokud používáte amplifier with a built-in crossover, ensure it is set appropriately for full-range speakers or a low-pass filter is not engaged too high.
  • Příloha: Ensure the speakers are securely mounted and the mounting location is sealed to prevent air leaks, which can reduce bass response.

7. Specifikace

The following table outlines the key technical specifications for the Alpine S2-S69 Coaxial Speaker Set:

FunkceSpecifikace
ZnačkaVysokohorský
Číslo modeluS2-S69
Typ reproduktoruKoaxiální, 2-cestný
Velikost reproduktoru6x9 palců
Průměr basového reproduktoru22.86 centimetrů (9 palců)
Průměr výškového reproduktoru1 palců
Maximální výstupní výkon reproduktoru170 wattů
Frekvenční odezva40000 Hz (Hi-Res Audio Certified)
Režim zvukového výstupuStereo
Technologie připojeníKoaxiální
Typ montážeDržák na dveře
Materiál pouzdraGlass Fiber (cone material)
Rozměry položky (D x Š x V)5.6"H x 10.9"Š x 15.8"V
Je voděodolnýFALEŠNÝ
UPC793276085061

8. Informace o záruce

The Alpine S2-S69 Coaxial Speaker Set comes with a 1-letá záruka výrobce. This warranty covers defects in materials and workmanship under normal use. Please refer to the warranty information included in your product packaging for full terms and conditions. Online product registration is available and recommended to activate your warranty and receive important product updates.

9. Podpora

For further assistance, technical support, or inquiries regarding your Alpine S2-S69 speakers, please visit the official Alpine website or contact Alpine customer service. Contact information can typically be found on the Alpine webwebu nebo v přiložené dokumentaci k produktu.

© 2026 Alpine. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.