TEEHO Fingerprint Door Lock User Manual

1. Úvod

This manual provides instructions for the installation, operation, and maintenance of your TEEHO Fingerprint Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The TEEHO Fingerprint Door Lock offers multiple access methods including fingerprint recognition, keypad codes, and traditional keys. It is designed for residential door security and keyless access control.

2. Obsah balení

• Fingerprint Keypad Door Lock (Exterior and Interior Assemblies)
• 2 Passage Door Knobs / Levers
• Západka závory
• Úderová deska
• Montážní hardware
• Keys (for emergency override)
• Šablona instalace

3. Nastavení a instalace

Before installation, ensure your door meets the required dimensions for compatibility.

Image: Diagram illustrating door compatibility and dimensions for installation, including backset (2-3/8" or 2-3/4"), door thickness (1-3/8" to 2"), and bore hole diameter (2-1/8").

3.1 Příprava dveří

1. Verify door thickness and backset measurement.
2. Use the provided template to mark and drill holes if necessary. The lock is suitable for 2-1/8" (54mm) door holes.

3.2 Instalace západky závory

1. Insert the deadbolt latch into the door edge. Ensure the 'UP' arrow is pointing upwards.
2. Zajistěte šrouby.

3.3 Installing the Exterior Assembly

1. Feed the cable through the door hole, below the deadbolt latch.
2. Align the exterior assembly with the deadbolt and door holes.

3.4 Installing the Interior Assembly

1. Připojte kabel z vnější sestavy k vnitřní sestavě.
2. Mount the interior assembly, ensuring proper alignment.
3. Zajistěte montážními šrouby.

3.5 Instalace baterie

1. Sejměte kryt baterie na vnitřní sestavě.
2. Insert 4 AA alkaline batteries (not included), observing polarity.
3. Nasaďte kryt baterie.

3.6 Installing Passage Door Levers

1. Install the passage door levers according to their specific instructions.

4. Návod k obsluze

4.1 Odemknutí otiskem prstu

The lock features 3D biometric fingerprint recognition. It can recognize your fingerprint in approximately 0.3 seconds and unlock the door in 1 second.

1. Přiložte registrovaný prst na snímač otisků prstů.
2. The lock will unlock upon successful recognition.

Image: A person using their finger on the fingerprint sensor of the TEEHO door lock for quick unlocking.

4.2 Keyless Entry (Keypad)

The lock supports up to 20 access codes, each 4-10 digits long.

1. Enter your registered access code on the keypad.
2. Press the '#' key (or equivalent confirmation key).
3. Zámek se odemkne.

Heslo proti peepingu

To prevent others from guessing your code, you can enter random digits before or after your actual access code.

Image: Illustration of the anti-peep function, showing random digits entered before and after the actual password on the backlit keypad.

4.3 One-Time PIN Code

Generate a temporary PIN code for guests, cleaners, or delivery staff. This code will be automatically deleted after a single use.

Image: A person receiving a one-time PIN code on their phone for temporary access to the door.

4.4 Funkce automatického zámku

The lock can be configured to automatically lock after a set period. This period can be adjusted between 10 and 99 seconds.

4.5 One-Touch Locking

To manually lock the door instantly, press and hold any key on the keypad for 2 seconds.

Image: Illustration showing the auto-lock function (10-99 seconds) and one-touch lock function (2 seconds hold) on the TEEHO door lock.

4.6 Další funkce

• Režim ztlumení: Disables keypad sounds for quiet operation.
• Režim dovolené: Enhances security when you are away for extended periods.
• Podsvícená klávesnice: Zlepšuje viditelnost za zhoršených světelných podmínek.

5. Údržba

5.1 Výměna baterie

The lock is powered by 4 AA batteries, providing up to 1 year of battery life. The lock features a low battery indicator.

Obrázek: Overview of lock features including 20 fingerprints, 20 user codes, auto-lock, IP54 waterproof rating, one-time PIN code, one-touch locking, low battery indicator, and up to 1 year battery life.

1. When the low battery indicator appears, replace all 4 AA batteries promptly.
2. Use new alkaline batteries for optimal performance.

5.2 Čištění

Otřete vnější stranu zámku měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu nebo elektronické součástky.

5.3 Odolnost vůči povětrnostním vlivům

The lock has an IP54 weather resistance rating, providing protection against dust and splashing water. While durable, avoid direct exposure to heavy rain or prolonged submersion.

6. Řešení problémů

• Zámek nereaguje: Check battery level. Replace batteries if low. Ensure cables are securely connected.
• Otisk prstu nebyl rozpoznán: Ensure your finger is clean and dry. Try placing your finger at different angles. Re-register your fingerprint if issues persist.
• Klávesnice nefunguje: Verify battery power. Ensure you are entering the correct code. Check for any physical damage to the keypad.
• Automatické zamykání se neaktivuje: Check the auto-lock settings to ensure it is enabled and the delay time is set correctly.
• Zámek je uvolněný: Tighten mounting screws on both interior and exterior assemblies.

7. Specifikace

8. Záruka a podpora

8.1 Informace o záruce

Specific warranty details are not provided within this manual. Please refer to the product packaging, the manufacturer's official website, or your purchase documentation for comprehensive warranty information.

8.2 Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your TEEHO Fingerprint Door Lock, please contact TEEHO customer support through their official webna webu nebo u prodejce, kde byl produkt zakoupen.