1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your TEEHO Fingerprint Door Lock, Model TEEHO-XXXX. Please read this manual thoroughly before installation and use to ensure proper function and security. Keep this manual for future reference.
2. Konec produktuview
The TEEHO Fingerprint Door Lock offers advanced keyless entry solutions for residential use, combining convenience with robust security features. This lock set includes a fingerprint keypad deadbolt and two passage door knobs.
Klíčové vlastnosti:
- 3D Fingerprint Unlock: High recognition rate, unlocking in approximately 1 second.
- Bezklíčový vstup: Supports up to 20 programmable access codes (4-10 digits) and multiple fingerprints.
- Funkce automatického zámku: Customizable automatic locking delay from 10 to 99 seconds.
- Zámek jedním dotykem: Instantly lock the door by pressing and holding any key on the keypad for 2 seconds.
- Jednorázový PIN kód: Generate temporary access codes that are automatically deleted after a single use.
- Bezpečnostní závora: ANSI Grade 3 rated, constructed with a sturdy lock cylinder and alloy for durability.
- Odolnost vůči počasí: Stupeň krytí IP54 pro ochranu proti prachu a stříkající vodě.
- Další vlastnosti: Anti-peeping password input, mute mode, vacation mode, and a backlit keypad for visibility in low light.
Figure 2.1: TEEHO Fingerprint Door Lock with lever handle.
3. Nastavení a instalace
3.1 Door Preparation and Dimensions
Ensure your door meets the following specifications for proper installation. The lock is suitable for both left-handed and right-handed doors.
- Zadní část: 2-3/8 inches (60 mm) or 2-3/4 inches (70 mm).
- Tloušťka dveří: 1-3/8 inches (35 mm) to 2 inches (50 mm).
- Průměr dveřního otvoru: Only suitable for 2-1/8 inches (54 mm) door holes.
Figure 3.1: Door preparation and dimensions.
3.2 Instalace baterie
The lock requires 4 AA batteries (not included). Alkaline batteries are recommended for optimal performance and battery life. Install batteries into the interior assembly of the lock.
Figure 3.2: Battery compartment and low battery indicator.
3.3 Počáteční programování
Refer to the included quick start guide for initial programming steps, including setting the master code and enrolling the first fingerprint. It is crucial to set a master code immediately after installation for security purposes.
4. Návod k obsluze
4.1 Odemknutí otiskem prstu
To unlock the door using your fingerprint, place your registered finger on the fingerprint sensor. The lock will recognize your fingerprint in approximately 0.3 seconds and unlock the door within 1 second.
Figure 4.1: Fingerprint unlocking in progress.
4.2 Zadávání pomocí klávesnice
Enter your 4-10 digit access code on the backlit keypad. The lock supports an anti-peeping password feature, allowing you to enter random digits before or after your actual code to prevent others from guessing it.
Figure 4.2: Using the anti-peep tactile keypad.
4.3 Automatické zamykání a zamykání jedním dotykem
- Automatický zámek: Zámek lze nakonfigurovat tak, aby se automaticky zamkl po uplynutí nastavené doby (10–99 sekund) po zavření dveří.
- Zámek jedním dotykem: To manually lock the door instantly, press and hold any key on the keypad for 2 seconds.
Figure 4.3: Auto-lock and one-touch locking.
4.4 One-Time PIN Code
Generate a temporary, single-use PIN code for visitors or service personnel. This code will automatically delete after its first use, providing secure temporary access without compromising your permanent codes.
Figure 4.4: One-time PIN code usage.
5. Údržba
5.1 Výměna baterie
The lock is designed for over 1 year of battery life under normal use. A low battery indicator will alert you when it's time to replace the 4 AA batteries. Replace all batteries simultaneously with new alkaline batteries.
5.2 Čištění
Očistěte vnější stranu zámku měkkým hadříkemamp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or electronic components. Ensure the fingerprint sensor and keypad are free of dirt and debris for optimal performance.
5.3 Ochrana proti povětrnostním vlivům
The lock has an IP54 weather resistance rating, protecting it from splashing water and limited dust ingress. While durable, avoid direct exposure to heavy rain or prolonged submersion.
6. Řešení problémů
- Zámek nereaguje: Check battery levels. Replace batteries if the low battery indicator is on or if the lock is completely unresponsive.
- Otisk prstu nebyl rozpoznán: Ensure your finger is clean and dry. Try re-enrolling your fingerprint if issues persist.
- Klávesnice nefunguje: Ensure the keypad is clean. If the backlight is off, check batteries.
- Automatické zamykání se neaktivuje: Verify the auto-lock setting is enabled and the delay time is correctly configured. Ensure the door is fully closed.
- Zámek se zdá být tuhý: Check for any obstructions in the door frame or latch mechanism. Ensure the lock is properly aligned.
Pro další pomoc se prosím obraťte na zdroje podpory výrobce.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | TEEHO |
| Číslo modelu | TEEHO-XXXX |
| Typ zámku | Keypad, Fingerprint |
| Materiál | Nikl |
| Barva | Saténový nikl |
| Typ dokončení | Kartáčovaný |
| Zdroj napájení | 4 AA Batteries (Alkaline recommended) |
| Odolnost vůči povětrnostním vlivům | IP54 |
| Zahrnuté komponenty | Fingerprint keypad door lock, 2 passage door knobs |
| Doporučené použití | Residential door security and keyless entry |
8. Záruka a podpora
For warranty information, technical support, or to purchase replacement parts, please contact TEEHO customer service. Refer to the product packaging or the official TEEHO webstránky pro kontaktní údaje.