1. Úvod
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDONE 8FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for demanding environments requiring high resistance to water, dust, and corrosion, such as parking garages, car washes, cold storage, and industrial facilities.
2. Bezpečnostní informace
VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local codes.
- Zajistěte přívod objtage is compatible with the fixture's requirements (120-277Vac).
- Nemanipulujte se svítidly pod napětím mokrýma rukama ani nestojte na mokrém či suchém povrchu.amp povrchy.
- Do not attempt to modify or disassemble the fixture. There are no user-serviceable parts inside.
- Během instalace používejte vhodné osobní ochranné prostředky (OOP).
- Ujistěte se, že je svítidlo bezpečně upevněno, aby nedošlo k jeho pádu.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.
- LEDONE 8FT LED Vapor Tight Light Fixture
- Mounting Hardware (clips, screws, anchors)
- Návod k použití (tento dokument)
4. Nastavení a instalace
4.1. Předinstalace
- Vypnout napájení: Locate the circuit breaker or fuse box and turn off the power supply to the installation area. Verify power is off using a voltage tester.
- Rozbalit: Carefully remove the fixture from its packaging. Inspect for any shipping damage.
- Vyberte Wattage and Color Temperature (CCT): Before mounting, adjust the wattage and CCT switches located on the fixture. These switches allow you to select between 60W, 80W, or 100W and 3500K, 4000K, or 5000K. Make your selection based on your lighting requirements.
Image: Product dimensions and location of wattage/CCT selection switches.
4.2. Montáž svítidla
The fixture is designed for surface mounting. Use the provided mounting clips and hardware.
- Mark the desired mounting locations on the ceiling or wall. Ensure the marks are level and spaced appropriately for the fixture's length.
- Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
- Připevněte montážní klipy k povrchu pomocí dodaných šroubů.
- Snap the LED vapor tight fixture into the mounted clips, ensuring it is firmly seated.
Obrázek: Přample of surface mounting in a facility.
Image: Detail of the linkable design feature.
4.3. Elektrické zapojení
This fixture supports 0-10V dimming. Follow the wiring diagram below and local electrical codes.
- Připojte Černý vodič od svítidla k Řádek (L) vodič ze zdroje napájení.
- Připojte Bílý vodič od svítidla k neutrální (N) vodič ze zdroje napájení.
- Připojte Zelený vodič od svítidla k Země (GND) vodič ze zdroje napájení.
- For 0-10V dimming: Connect the Fialová vodič od svítidla k Ztlumit+ wire from the 0-10V dimmer. Connect the Růžová/šedá vodič od svítidla k Dim wire from the 0-10V dimmer.
- Ensure all connections are secure using appropriate wire connectors.
Note: If 0-10V dimming is not used, cap the purple and pink/gray wires individually with wire nuts.
5. Návod k obsluze
- Zapnutí: Once installation and wiring are complete, restore power to the circuit at the breaker or fuse box. The fixture should illuminate.
- Stmívání: If connected to a compatible 0-10V dimmer, adjust the dimmer control to achieve the desired light output level.
- Wattage and CCT Adjustment: Wattage and CCT are set via internal switches during installation. These are not typically adjusted during normal operation. If changes are needed, disconnect power before accessing the switches.
6. Údržba
The LEDONE Vapor Tight Light is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.
- Čištění: Před čištěním odpojte napájení. Použijte měkký,amp cloth with a mild, non-abrasive cleaner to wipe the exterior of the fixture. Do not use harsh chemicals or abrasive pads, as these can damage the finish or lens.
- Inspekce: Periodically inspect the fixture and mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
- Žádné díly opravitelné uživatelem: The LED light source and driver are integrated components. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic cleaning and inspection.
Image: The IP65 waterproof rating ensures durability in wet conditions.
7. Řešení problémů
Before performing any troubleshooting, ensure power is disconnected at the circuit breaker.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Svítidlo nesvítí. | Žádné napájení. Nesprávné zapojení. Vadné příslušenství. |
Zkontrolujte jistič/pojistku. Verify all wire connections are secure and correct. Contact customer support if wiring is correct and power is present. |
| Světelný výkon je příliš nízký nebo příliš vysoký. | Nesprávné wattage nastavení. Nastavení stmívače. Nekompatibilní stmívač. |
Ověřte wattage switch setting (power off). Adjust 0-10V dimmer. Ujistěte se, že stmívač je kompatibilní s napětím 0–10 V. |
| Světlo bliká. | Uvolněné připojení kabeláže. Nekompatibilní stmívač. Kolísání výkonu. |
Zkontrolujte všechna připojení vodičů. Ujistěte se, že stmívač je kompatibilní s napětím 0–10 V. Poraďte se s elektrikářem, aby zkontroloval stabilitu napájení. |
8. Specifikace
| Parametr | Hodnota |
|---|---|
| Model | 8FT LED Vapor Tight Light |
| Značka | LEDONE |
| Wattage | 60 W / 80 W / 100 W (volitelné) |
| Teplota barev (CCT) | 3500K / 4000K / 5000K (Selectable) |
| Vstupní objemtage | 120-277Vac |
| Stmívání | 0-10V Stmívatelné |
| Lumen výstup | Až 21 000 lumenů (při 100 W) |
| Úhel paprsku | 110° |
| Celý život | 50,000 hodin |
| Hodnocení IP | IP65 (vodotěsný a prachotěsný) |
| Certifikace | UL Listed, DLC Listed, NSF Listed |
| Materiál bydlení | PC Housing with White Cover |
| Materiál čočky | Matné PC |
| Rozměry (D x Š x V) | 95.98" × 2.61" × 2.42" (2438 mm × 66.4 mm × 61.4 mm) |
Image: Key features and certifications of the LEDONE Vapor Tight Light.
9. Informace o záruce
LEDONE products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official LEDONE webKonkrétní záruční podmínky naleznete na webových stránkách. Uschovejte si doklad o koupi pro případ reklamace.
10. Zákaznická podpora
If you have any questions, require technical assistance, or need to report an issue, please contact LEDONE customer support:
- Webmísto: Visit the LEDONE Store on Amazon (for general inquiries)
- E-mail: Viz obal produktu nebo oficiální webweb pro přímou e-mailovou podporu.
- Telefon: Viz obal produktu nebo oficiální webweb s přímým telefonním číslem podpory.
Please have your product model number (8FT LED Vapor Tight Light) and proof of purchase ready when contacting support.