1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your BitFenix Nova Mesh mATX ARGB PC Case. Please read this guide thoroughly before beginning assembly to ensure proper setup and optimal performance. Keep this manual for future reference.
2. Konec produktuview
The BitFenix Nova Mesh mATX ARGB PC Case is designed for high airflow and aesthetic appeal, featuring pre-installed ARGB fans and support for various PC components. Its compact mATX form factor makes it suitable for efficient builds.
Obrázek: Přední strana view of the BitFenix Nova Mesh mATX ARGB PC Case, highlighting its dimensions (385mm H x 205mm W x 400mm D), three 120mm ARGB fans, and the included 4+4 ARGB controller.
Klíčové vlastnosti:
- Design s vysokým průtokem vzduchu: Mesh front panel for optimal ventilation.
- Předinstalované ARGB ventilátory: Three 120mm ARGB fans included with a built-in ARGB LED/PWM system controller.
- Kompatibilita komponent: Supports Micro ATX and Mini ITX motherboards.
- Podpora GPU: Vhodné pro grafické karty o délce až 345 mm.
- Podpora chladičů CPU: Air coolers up to 160mm in height.
- Podpora PSU: Power supplies up to 180mm in length.
- Podpora radiátorů: Top: 240mm (thickness up to 27mm, fans up to 25mm thick with memory height up to 38mm). Front: 240mm/280mm. Rear: 120mm.
- Možnosti úložiště: Modular HDD cage with 3+1 2.5" SSD mounts and 2 x 3.5" HDD trays.
- Správa kabelů: 25mm space behind the motherboard tray.
- Boční panel z tvrzeného skla: 4mm screw-free tempered glass for easy access and aesthetics.
- Filtrace prachu: Removable front panel, PSU dust filter at the bottom, and magnetic dust filter at the top.
3. Nastavení a instalace
Follow these steps for assembling your PC components within the BitFenix Nova Mesh mATX ARGB case.
3.1 Příprava případu
- Odstraňte boční panely: Carefully remove the 4mm screw-free tempered glass side panel and the solid steel side panel.
- Krabice s příslušenstvím: Locate the accessory box inside the case, which contains screws and other mounting hardware.
3.2 Instalace základní desky
- Nainstalujte Standoffs: Ensure the correct standoffs are installed for your Micro ATX or Mini ITX motherboard.
- Montáž základní desky: Place your motherboard onto the standoffs and secure it with the appropriate screws.
3.3 Instalace jednotky napájecího zdroje (PSU)
Image: Diagram showing the modular HDD cage with 2.5" SSD mounts and 3.5" HDD trays, and the power supply unit (PSU) installation area with space up to 180mm.
- Pozice zdroje napájení: Slide the PSU into the bottom mount area, ensuring the fan faces downwards for optimal cooling (if applicable).
- Zabezpečený zdroj: Fasten the PSU to the rear of the case with screws.
3.4 Instalace úložného disku
- 2.5" SSD disky: Mount 2.5" SSDs onto the dedicated mounts behind the motherboard tray or on the modular HDD cage.
- 3.5" pevné disky: Install 3.5" HDDs into the removable trays within the modular HDD cage.
3.5 Instalace grafické karty (GPU)
Obrázek: Interní view of the case illustrating support for graphics cards up to 345mm, air coolers up to 160mm, and 25mm cable management space.
- Odstranění krytů slotů PCIe: Odstraňte potřebné kryty slotů PCIe ze zadní strany skříně.
- Vložit grafickou kartu: Opatrně vložte grafickou kartu do příslušného slotu PCIe na základní desce.
- Bezpečná grafická karta: Fasten the GPU with screws to the case.
3.6 Cooling System Installation (Optional)
Image: Internal layout detailing radiator support (240mm at top, 120mm/240mm/280mm at front, 120mm at rear) and fan configurations.
- Chladič vzduchu: Install your CPU air cooler, ensuring it does not exceed 160mm in height.
- Liquid Cooler (AIO): For 240mm AIO radiators, mount them at the top of the case. Ensure radiator thickness is within 27mm and fan thickness up to 25mm, with memory height up to 38mm.
- Další ventilátory: Install additional 120mm or 140mm fans as needed in the front, top, or rear positions.
3.7 Správa kabelů
Utilize the 25mm space behind the motherboard tray and the various cable routing cutouts to organize cables. This improves airflow and aesthetics.
4. Operating the ARGB Lighting System
The BitFenix Nova Mesh mATX ARGB case comes with three pre-installed ARGB fans and a controller for managing the lighting effects.
Image: Diagram illustrating the connection of ARGB fans to the controller, SATA power, motherboard ARGB 3-pin connector, and the front RGB switch.
4.1 ARGB Control Options
- Ovládání tlačítkem pouzdra: The pre-installed ARGB controller can be connected to the case's front RGB switch (often the reset button). Pressing this button will cycle through various ARGB lighting modes and colors.
- Synchronizace základní desky: If your motherboard supports Addressable RGB (aRGB) with a 3-pin 5V header, you can connect the controller to your motherboard. This allows you to synchronize the case lighting with other ARGB components using your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, BIOSTAR RGB Sync).
4.2 Řízení otáček ventilátoru (PWM)
The included controller also supports PWM (Pulse Width Modulation) for fan speed control. Connect the fan PWM cables to the controller, and the controller's PWM cable to a motherboard fan header. This allows your motherboard to dynamically adjust fan speeds based on system temperature.
5. Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vaší počítačové skříně a jejích komponent.
5.1 Čištění prachového filtru
Obrázek: Rozložený view of the front panel, dust filter, and high-density mesh, along with images of the PSU dust filter and magnetic top dust filter, emphasizing easy cleaning.
- Front Panel Filter: The front panel is removable for easy access to the dust filter. Gently pull the bottom of the front panel to detach it, then remove and clean the filter.
- Horní magnetický filtr: The magnetic dust filter on the top of the case can be easily lifted off for cleaning.
- Prachový filtr PSU: The dust filter located at the bottom, beneath the PSU, slides out for cleaning.
- Metoda čištění: Use compressed air or a soft brush to remove accumulated dust from the filters. Wash with water if necessary, ensuring they are completely dry before reinstallation.
5.2 Obecné čištění
- Vnější: Vnější povrchy otřete měkkým, damp tkanina. Vyhněte se abrazivním čisticím prostředkům.
- Interiér: Periodically use compressed air to clear dust from internal components and fan blades. Ensure the PC is powered off and unplugged before cleaning.
6. Řešení problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat u skříně počítače.
6.1 Ventilátory se netočí nebo RGB nefunguje
- Připojení napájení: Ensure the ARGB controller is properly connected to a SATA power cable from your PSU.
- Připojení ventilátoru: Verify that all fan PWM and ARGB cables are securely connected to the controller.
- Synchronizace základní desky: If using motherboard sync, ensure the controller's ARGB cable is connected to the correct 3-pin 5V aRGB header on your motherboard (not a 4-pin 12V RGB header). Check your motherboard's software for ARGB control.
- Tlačítko pouzdra: If using the case button for control, ensure it is correctly wired to the controller. Try pressing the button to cycle through modes.
6.2 Poor Airflow or High Temperatures
- Prachové filtry: Clean all dust filters as described in the Maintenance section.
- Orientace ventilátoru: Verify that fans are oriented correctly for optimal airflow (front fans typically intake, rear/top fans exhaust).
- Správa kabelů: Zlepšete správu kabelů, abyste snížili překážky proudění vzduchu.
- Vůle komponent: Ensure no components are blocking fan intakes or exhausts.
6.3 Side Panel Difficult to Close
- Vedení kabelů: Check for any cables that are bulging or obstructing the side panel. Reroute them through the cable management channels.
- Umístění komponent: Ensure all components are seated correctly and not extending beyond the case's internal dimensions.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Název modelu | BFC-NSE-300-KKGSR-4A |
| Form Factor | Micro-ATX, Mini-ITX |
| Typ pouzdra | Střední věž |
| Rozměry (D x Š x V) | 15.16 x 8.07 x 15.75 palce (385 x 205 x 400 mm) |
| Materiál | Kov, tvrzené sklo |
| Barva | Černý |
| Předinstalované ventilátory | 3 x 120mm ARGB ventilátory |
| Podpora ventilátoru (přední) | 2 x 120 mm nebo 2 x 140 mm |
| Podpora ventilátoru (horní) | 2 x 120 mm |
| Podpora ventilátoru (zadní) | 1 x 120 mm |
| Držák chladiče (horní) | 240mm (thickness <= 27mm, fan thickness <= 25mm, memory height <= 38mm) |
| Podpora délky GPU | Až 345 mm |
| Air Cooler Height Support | Až 160 mm |
| Podpora délky zdroje | Až 180 mm |
| Drive Bays (2.5" SSD) | 3+1 |
| Drive Bays (3.5" HDD) | 2 |
| Prostor pro správu kabelů | 25mm behind motherboard tray |
| Prachové filtry | Front Panel, PSU (Bottom), Magnetic (Top) |
| I/O porty | 2x USB 3.0 |
8. Informace o záruce
BitFenix products are manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For detailed warranty information, please refer to the official BitFenix webwebu nebo se obraťte na svého místního prodejce.
9. Podpora
If you encounter any issues or have questions regarding your BitFenix Nova Mesh mATX ARGB PC Case that are not covered in this manual, please contact BitFenix customer support or visit their official webstránky pro další pomoc.
BitFenix Official Webmísto: www.bitfenix.com
Please have your product model number (BFC-NSE-300-KKGSR-4A) and proof of purchase ready when contacting support.