Focal FTHEVAN3LW-D

Focal Theva N°3-D Floorstanding Loudspeaker

Návod k použití

1. Úvod

The Focal Theva N°3-D is a high-fidelity 3-way floorstanding loudspeaker designed for home cinema systems. It features Dolby Atmos® compatibility, achieved through a dedicated speaker driver positioned on the top of the cabinet. This driver reflects sound waves off the ceiling to create immersive 3D audio effects. This manual provides essential information for the proper setup, operation, and maintenance of your Theva N°3-D loudspeaker.

2. Bezpečnostní pokyny

Please read these safety instructions carefully before using your loudspeaker. Keep this manual for future reference.

  • Umístění: Ensure the loudspeaker is placed on a stable, level surface to prevent tipping. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
  • Větrání: Neblokujte žádné větrací otvory. Ponechte kolem reproduktoru dostatečný prostor pro správné proudění vzduchu.
  • Moc: Připojte reproduktor k amplifier with appropriate power ratings. Exceeding recommended power can damage the speaker.
  • Čištění: Disconnect the loudspeaker from the ampPřed čištěním vysavač očistěte. Použijte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani aerosoly.
  • Servis: Nepokoušejte se reproduktor opravovat sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu.
  • Děti: Uchovávejte obalové materiály a malé součásti mimo dosah dětí, abyste předešli nebezpečí udušení.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny součásti:

  • Focal Theva N°3-D Floorstanding Loudspeaker (Model: FTHEVAN3LW-D)
  • Grille (pre-installed or separate)
  • Uživatelská příručka (tento dokument)

Pokud některé položky chybí nebo jsou poškozené, kontaktujte prosím svého prodejce.

4. Konec produktuview

The Theva N°3-D loudspeaker incorporates advanced technologies for superior audio performance and immersive sound.

Klíčové vlastnosti:

  • 3-way floorstanding design, Dolby Atmos® compatible.
  • Full-range speaker driver with directional baffle for precise Dolby Atmos® effects.
  • Slatefiber technology for immersive and dynamic home cinema sound.
  • TNF Tweeter for mellow treble reproduction.
  • Time Alignment design for a focused sound image.

Komponenty:

  • Dolby Atmos® Driver: Located on the top, designed to reflect sound off the ceiling.
  • TNF Tweeter: Aluminum/Magnesium inverted dome tweeter for high frequencies.
  • Ovladač střední třídy: 6.5-inch (16.5cm) Slatefiber cone for balanced and precise mid-range.
  • Basové reproduktory: Two 6.5-inch (16.5cm) Slatefiber cone woofers for powerful bass.
  • Nakloněný stojan: Integrated stand for optimal Time Alignment.
Focal Theva N°3-D Product Sheet Diagram

Figure 1: Focal Theva N°3-D Product Sheet illustrating key components and features. This diagram shows the internal structure, driver types (TNF Tweeter, Slatefiber midrange, Slatefiber woofers), and the top-mounted Dolby Atmos driver with its directional baffle.

Focal Theva N°3-D Dolby Atmos Driver Top View

Obrázek 2: Detail view of the top-mounted Dolby Atmos driver on the Focal Theva N°3-D loudspeaker. This driver is designed to project sound upwards for ceiling reflection, creating immersive 3D audio effects.

Focal Slatefiber Cone Close-up

Obrázek 3: Detailní view of the Slatefiber cone material used in the midrange and woofer drivers of the Focal Theva N°3-D. This material contributes to dynamic and immersive sound reproduction.

Focal TNF Tweeter Close-up

Figure 4: Close-up of the TNF Tweeter, an Aluminum/Magnesium inverted dome, responsible for clear and mellow high-frequency reproduction in the Focal Theva N°3-D loudspeaker.

5. Nastavení

5.1 Umístění

Optimal placement is crucial for achieving the best sound performance from your Theva N°3-D loudspeakers, especially for Dolby Atmos effects.

  • Stereo nastavení: For a traditional stereo setup, place the loudspeakers equidistant from your primary listening position, forming an equilateral triangle.
  • Home Cinema Setup: In a home cinema configuration, the Theva N°3-D speakers should be positioned as your front left and right channels. Ensure they are placed symmetrically relative to your screen and listening area.
  • Dolby Atmos: The integrated upward-firing driver requires a reflective ceiling. Position the speakers so that the sound from the top driver can reflect off the ceiling and reach your listening position. Avoid placing them under sound-absorbing materials or very high ceilings that might diminish the effect.
  • Vzdálenost od zdí: Experiment with the distance from the rear and side walls. Placing speakers too close to walls can overemphasize bass, while too far can reduce bass impact. A good starting point is 1-2 feet (30-60 cm) from the rear wall.
Focal Theva Home Cinema Setup Example

Obrázek 5: Přample of a Focal Theva home cinema setup, demonstrating typical speaker placement for optimal sound dispersion and Dolby Atmos effects. Note the symmetrical positioning relative to the viewoblast.

5.2 Připojení

The Theva N°3-D loudspeakers connect to your amplifier using standard speaker cables.

  • Výběr kabelu: Use high-quality speaker cables of appropriate gauge for the length required.
  • Polarita: Ensure correct polarity (+ to + and - to -) when connecting the speaker terminals to your amplifier. Incorrect polarity will result in poor sound quality and imaging.
  • Typ terminálu: The Theva N°3-D features binding posts that accept bare wire, spade connectors, or banana plugs.
  • Amplifier kanály: Connect the main speaker terminals to the front left and right channels of your amplifier. For the Dolby Atmos effect, ensure your amplifier or AV receiver has dedicated height channels and connect the top-mounted driver terminals to these outputs. Consult your amplifier's manual for specific height channel connections.
Focal Theva N°3-D Rear View s připojeními

Obrázek 6: Zadní view of the Focal Theva N°3-D loudspeaker, showing the speaker terminals for connection to an amplifier. Note the separate terminals for the main drivers and the top-mounted Dolby Atmos driver.

6. Návod k obsluze

Once properly set up and connected, operating your Theva N°3-D loudspeakers is straightforward.

  • Zapnutí: Ujistěte se, že vaše amplifier je zapnutý a nastaven na správný vstupní zdroj.
  • Ovládání hlasitosti: Upravte úroveň hlasitosti na svém amplifier. Start at a low volume and gradually increase it to a comfortable listening level.
  • Source Material: For optimal Dolby Atmos experience, use content encoded with Dolby Atmos audio tracks.
  • Doba záběhu: Loudspeakers typically require a break-in period of several hours of use to achieve their full sonic potential. During this time, the drivers will loosen up and perform optimally.

7. Údržba

Proper care will ensure the longevity and performance of your loudspeakers.

  • Čištění skříně: Use a soft, dry, lint-free cloth to wipe the cabinet surfaces. For stubborn marks, a slightly damp Lze použít hadřík a poté suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Čištění mřížky: The fabric grille can be gently vacuumed with a soft brush attachment to remove dust.
  • Péče o řidiče: Nedotýkejte se přímo membrán reproduktorů nebo výškových reproduktorů, mohlo by dojít k jejich poškození.
  • Podmínky prostředí: Protect the speakers from extreme temperatures, humidity, and direct sunlight.

8. Řešení problémů

If you encounter issues with your Theva N°3-D loudspeakers, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Žádný zvuk z reproduktoruLoose cable connection, incorrect input selection on ampzvlhčovač, amplifier off, speaker damaged.Zkontrolujte všechna kabelová připojení (reproduktor k ampzdroj, zdroj amplifier). Ensure amplifier is on and correct input is selected. Test with another speaker if possible.
Zkreslený zvukPřehnané amplifier, damaged speaker driver, incorrect cable connection (polarity).Snížit amplifier volume. Check speaker cable polarity. Inspect speaker drivers for visible damage.
Slabé nebo žádné basyIncorrect speaker placement, phase issue, ampnastavení zvlhčovače.Adjust speaker placement relative to walls. Check amplifier's bass/tone controls or room correction settings. Ensure correct polarity.
Poor Dolby Atmos effectNesprávný amplifier setup, unsuitable room acoustics, speaker placement.Verify height channel connections on your amplifier. Ensure your AV receiver is configured for Dolby Atmos. Check ceiling height and material for proper reflection. Adjust speaker angle if possible.

Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu společnosti Focal nebo autorizovaného prodejce.

9. Specifikace

Detailed technical specifications for the Focal Theva N°3-D Floorstanding Loudspeaker.

FunkceSpecifikace
Název modeluFTHEVAN3LW-D
Typ reproduktoru3-way Floorstanding, Dolby Atmos Compatible
MateriálDřevo
BarvaSvětlé dřevo
Rozměry produktu (D x Š x V)34"D x 116"W x 26.5"H (Note: Dimensions seem unusually large, please verify with manufacturer if critical)
Hmotnost položky48 libry
Speaker Size (Woofer/Subwoofer)6.5 palce
Maximální výstupní výkon reproduktoru250 wattů
Odstup signálu od šumu91 dB
Režim zvukového výstupuStereo, Dolby Atmos
Typ montážeStojící na podlaze
Technologie připojeníPower Cord (Note: This typically refers to active speakers, but Theva N°3-D is passive. This might be a data entry error in the source.)
Doporučená použitíFor DVD Players, For Gaming Consoles, For Surround Sound Systems, For Televisions, Home Cinema
Kompatibilní zařízeníLaptop, Smartphone, Tablet, Television (via ampživější)
Focal Theva N°3-D Dimensions Diagram

Figure 7: Dimensions diagram for the Focal Theva N°3-D loudspeaker, showing height (40.19"), depth (15.28"), and width (8.35").

10. Záruka a podpora

10.1 Informace o záruce

The Focal Theva N°3-D loudspeaker comes with a limited warranty. Please refer to the warranty card included with your product or visit the official Focal webpodrobné podmínky týkající se krytí, doby trvání a postupu při reklamaci naleznete na webových stránkách.

10.2 Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Focal dealer or visit the official Focal support webmísto:

  • Ohniskové Webmísto: www.focal.com
  • Informace o prodejci: Refer to your purchase receipt or the Focal website to locate an authorized dealer near you.

© 2024 Focal. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.