AUTOPHIX JSC2100

AUTOPHIX JSC2100 Super Capacitor Jump Starter User Manual

Model: JSC2100

1. Konec produktuview

The AUTOPHIX JSC2100 is a super capacitor jump starter designed to provide a quick and reliable start for vehicles with a discharged battery. Unlike traditional battery-based jump starters, this unit utilizes super capacitor technology, allowing it to draw a small charge from the vehicle's weak battery or another power source and then rapidly discharge it to start the engine. It is suitable for a wide range of 12V vehicles.

AUTOPHIX JSC2100 Super Capacitor Jump Starter connected to a car battery.

The AUTOPHIX JSC2100 Super Capacitor Jump Starter is designed to provide a quick and reliable start for vehicles with a dead battery. It connects directly to the vehicle's battery terminals.

2. Bezpečnostní informace

Před použitím tohoto výrobku si prosím přečtěte a pochopte všechny bezpečnostní informace. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

  • Always wear eye protection and gloves when working with vehicle batteries.
  • Do not allow the positive (+) and negative (-) clampse navzájem dotýkat.
  • Neponořujte jednotku do vody ani ji nevystavujte silnému dešti.
  • Nepoužívejte jednotku, pokud byla poškozena nebo upravena.
  • Uchovávejte mimo dosah dětí.
  • Při práci v uzavřených prostorách zajistěte řádné větrání.
Icons representing 10 security protections of the AUTOPHIX JSC2100.

The JSC2100 incorporates ten safety features: Reverse Polarity Protection, High-Temperature Protection, Low-Temperature Protection, Zero Damage Protection, Reverse Charge Protection, Short Circuit Protection, Overcharge Protection, Over Discharge Protection, Overload Protection, and Low Voltage Ochrana.

3. Komponenty produktu

Familiarize yourself with the different parts of your AUTOPHIX JSC2100 unit:

Labeled diagram of the AUTOPHIX JSC2100 Super Capacitor Jump Starter components.

Key components of the JSC2100 include the clamps for battery connection, an LCD display for status, a start button, a USB charging port, a DC charging port, and an EC8 port for alligator clip cable connection.

  • Clamps: For connecting to the vehicle battery terminals.
  • LCD displej: Zobrazuje stav nabíjení, kapacitu baterietage, and operational messages.
  • Tlačítko Start: Zahájí proces startování pomocí pomocných kabelů.
  • USB nabíjecí port: For charging the unit via a USB power source.
  • Nabíjecí port stejnosměrného proudu: For charging the unit via a 12V DC source (e.g., cigarette lighter).
  • EC8 Port: Connector for the alligator clip cable.

4. Co je v krabici

Ověřte, zda jsou v balení přítomny všechny položky:

Contents of the AUTOPHIX JSC2100 Super Capacitor Jump Starter package.

The package includes the JSC2100 Super Capacitor Jump Starter unit, EC8 Alligator Clamps, a Type-C USB cable, a cigarette lighter charging cable, and this instruction manual.

  • 1x AUTOPHIX JSC2100 Super Capacitor Jump Starter
  • 1x EC8 Alligator Clip Cable
  • 1x USB kabel typu C
  • 1x Cigarette Lighter Charging Cable
  • 1x Návod k použití

5. Nastavení a nabíjení

The JSC2100 does not require pre-charging like traditional jump starters. It charges rapidly from a weak battery or other sources just before use.

Způsoby nabíjení

The unit can be charged using one of the following methods:

Three methods for charging the AUTOPHIX JSC2100: via cigarette lighter, alligator clamps, and USB.

The JSC2100 can be charged using various methods, including a 12V car cigarette lighter socket, directly from a vehicle's battery using the alligator clamps, or via a standard USB power source.

  1. From Vehicle's 12V Battery (via Alligator Clamps): Připojte červenou třamp na kladný (+) terminál a černý třamp to the negative (-) terminal of the vehicle's weak battery. The unit will begin to draw a small charge and prepare for jump-starting.
  2. From Vehicle's 12V Cigarette Lighter Socket: Connect the cigarette lighter charging cable to the DC charging port on the JSC2100 and plug the other end into the vehicle's 12V accessory socket.
  3. From USB Power Source: Connect the Type-C USB cable to the USB charging port on the JSC2100 and the other end to a standard USB power adapter (not included).

Přibližná doba nabíjení:

  • 12V Charging: Approximately 5 minutes
  • 6V Charging: Approximately 20 minutes
  • 5V Charging: Approximately 30 minutes

6. Návod k obsluze (Startování pomocí pomocného kabelu)

Follow these steps to jump start your vehicle:

  1. Připravte vozidlo: Ujistěte se, že je vypnuté zapalování vozidla a veškeré příslušenství (světla, rádio, klimatizace). Zatáhněte parkovací brzdu.
  2. Připojte Clamps:
    • Připojte červená kladná (+) clamp ke kladnému (+) pólu baterie vozidla.
    • Připojte černý negativní (-) clamp to a clean, unpainted metal part of the vehicle's engine block or chassis, away from the battery and moving parts. Alternatively, connect to the negative (-) terminal of the battery if accessible and safe.
  3. Charge the Jump Starter: The JSC2100 will begin to charge itself from the vehicle's weak battery. Monitor the LCD display for the charging progress. Once fully charged (indicated on the display), the unit is ready.
  4. Nastartujte vozidlo: Once the JSC2100 is fully charged, press the 'Start' button on the unit. Then, attempt to start your vehicle's engine. If the vehicle does not start immediately, wait a few minutes and try again.
  5. Odpojte Clamps: Once the vehicle has started, disconnect the black negative (-) clamp first, followed by the red positive (+) clamp. Store the jump starter safely.

Kompatibilita vozidel

The AUTOPHIX JSC2100 is suitable for 12V vehicles with engines up to 10.0L for gasoline and 8.0L for diesel.

AUTOPHIX JSC2100 Super Capacitor Jump Starter suitable for various 12V vehicles.

This jump starter is compatible with a wide range of 12V vehicles, including cars, SUVs, motorcycles, business cars, vans, and pickup trucks, supporting engines up to 10.0L gas and 8.0L diesel.

7. Údržba

To ensure the longevity and optimal performance of your AUTOPHIX JSC2100, follow these maintenance guidelines:

  • Čištění: Přístroj otřete suchým, měkkým hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
  • Skladování: Startovací baterii skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
  • Péče o kabely: Zkontrolujte kabely a clampPravidelně kontrolujte, zda nevykazuje známky poškození, roztřepení nebo koroze. V případě potřeby vyměňte.
  • No Internal Battery Maintenance: As a super capacitor unit, it does not require the same battery maintenance as traditional lead-acid or lithium jump starters.

8. Řešení problémů

If you encounter issues with your JSC2100, refer to the following common troubleshooting steps:

Problém Možná příčina Řešení
Unit does not charge or turn on. Loose connections, completely dead battery, faulty charging cable. Ensure all connections are secure. Try a different charging method (e.g., USB if using clamps). If the vehicle battery is completely dead (below 5V), it may not provide enough power to charge the super capacitors; try charging from another vehicle's battery or a power bank.
Vozidlo po pokusu o nastartování nenastartuje. Incorrect connection, insufficient charge, severe battery issue, other vehicle problems. Ověřte třamps are correctly attached (red to +, black to chassis/ground). Ensure the JSC2100 is fully charged before pressing 'Start'. If the problem persists, the vehicle may have other mechanical or electrical issues requiring professional diagnosis.
LCD display shows an error message. Specific error condition (e.g., reverse polarity, over-temperature). Refer to the specific error code on the display. Disconnect the unit, wait a few minutes, and reconnect, ensuring correct procedure. If it's a temperature error, allow the unit to cool down or warm up to within its operating range.

9. Specifikace

  • Model: JSC2100
  • Značka: AUTOPHIX
  • Vrchol Amperage: 1000 Amps
  • svtage: 12 voltů
  • Kompatibilita motoru: Až 10.0 l benzínu, 8.0 l nafty
  • Provozní teplota: -25 °C až 70 °C (-13 °F až 158 °F)
  • Rozměry produktu: 30.5 x 28 x 7.5 cm
  • Země původu: USA
AUTOPHIX JSC2100 operating in extreme cold and hot weather conditions.

The AUTOPHIX JSC2100 is designed to operate reliably in a wide range of temperatures, from -25°C (-13°F) to 70°C (158°F).

10. Záruka a podpora

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official AUTOPHIX webUschovejte si účtenku jako doklad o koupi pro případ reklamace.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.