Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light User Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light. This outdoor flood light features a motion sensor and dusk-to-dawn functionality, offering efficient and reliable illumination for various outdoor spaces. Please read these instructions thoroughly before installation and use to ensure proper function and safety.

Obrázek: Přední strana view of the Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light, showcasing its three adjustable heads and integrated motion sensor.

Bezpečnostní informace

• VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.
• Tento produkt musí být instalován v souladu s platným instalačním předpisem osobou obeznámenou s konstrukcí a provozem produktu a souvisejícími riziky.
• Use only UL or ETL listed wire for connections.
• Do not install this fixture with wet hands or while standing on wet or damp povrchy.
• Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.
• This fixture is designed for outdoor use and is wet location rated (IP65).

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1 x Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light
• Mounting Hardware (screws, wire nuts, gasket)
• Návod k použití

Nastavení a instalace

This flood light is designed for hardwired, flush mount installation on a wall. Ensure the mounting surface is stable and can support the fixture's weight.

Požadované nástroje (nejsou součástí dodávky):

• Šroubovák
• Odizolovače drátů
• Kleště
• Elektrická páska
• Ochranné brýle

Kroky instalace:

1. Vypnout napájení: Locate the circuit breaker controlling the outdoor lighting circuit and turn off the power. Verify power is off using a voltage tester.
2. Připravte montážní povrch: Ensure the electrical junction box is securely installed and accessible.
3. Attach Mounting Back Plate: Secure the fixture's mounting back plate to the junction box using the provided screws. Ensure the gasket is properly seated between the back plate and the mounting surface for a weather-tight seal.
4. Kabelová připojení: Connect the fixture's wires to your household wiring. Match the wires:
   • Černá (koncert) k černé (koncert)
   • Bílá (neutrální) až bílá (neutrální)
   • Zelená nebo holá měď (uzemněná) k zelené nebo holé mědi (uzemněné)
   Use the provided wire nuts and secure connections with electrical tape.
5. Montážní přípravek: Carefully align the fixture with the mounting back plate and secure it with the remaining screws. Ensure no wires are pinched.
6. Těsnění (volitelné, ale doporučené): Apply a bead of silicone caulk around the perimeter of the fixture where it meets the mounting surface to prevent water intrusion.
7. Obnovit napájení: Znovu zapněte napájení na jističi.

Image: Illustration of the hands-free wiring and mounting back plate, demonstrating how the fixture attaches to the wall for installation.

Návod k obsluze

Your Feit Electric LED Security Flood Light is equipped with both a motion sensor and dusk-to-dawn technology for automated operation.

Funkce od soumraku do úsvitu:

The integrated photocell sensor automatically detects ambient light levels. The light will remain off during daylight hours and activate its motion sensing capabilities only when it gets dark. This ensures energy efficiency by preventing the light from operating unnecessarily during the day.

Image: A visual comparison illustrating the effect of dusk-to-dawn functionality, showing the light off during the day and on at night.

Funkce pohybového senzoru:

Once the dusk-to-dawn sensor detects darkness, the motion sensor becomes active. It detects movement within a 180-degree range and up to 60 feet away. Upon detecting motion, the flood light will illuminate to its full 5000 lumens. After a period of no detected motion, the light will automatically turn off or dim down to 500 lumens if configured for lower light levels.

Nastavení světelných hlav:

The three LED light heads are independently adjustable, allowing you to direct the light output up to 270 degrees of coverage. Loosen the adjustment screws on each head, position the light as desired, and then securely tighten the screws.

Údržba

The Feit Electric LED Security Flood Light is designed for low maintenance and durability, featuring rugged, weather-resistant aluminum housing and shatter-resistant polycarbonate lenses.

Čištění:

• Před čištěním se ujistěte, že je vypnuté napájení.
• Otřete svítidlo měkkým hadříkemamp tkanina.
• Do not use abrasive cleaners or solvents, as these can damage the finish or lenses.

Inspekce:

• Periodically inspect the fixture for any signs of damage to the housing or wiring.
• Check that the mounting remains secure.

Image: The flood light mounted on an exterior wall, demonstrating its robust construction and IP65 wet-location rating, capable of withstanding various weather conditions.

Odstraňování problémů

Specifikace

Image: A detailed diagram outlining the key specifications of the flood light, such as dimensions, wattage, brightness, color temperature, and IP rating.

Záruka

The manufacturer states that there is no explicit warranty description provided for this product. Please refer to your retailer's return policy or contact Feit Electric directly for any warranty-related inquiries.

Zákaznická podpora

For further assistance, technical support, or to inquire about replacement parts, please contact Feit Electric customer service.

You can also visit the official Feit Electric store for more information and products: Feit Electric Store