Uživatelská příručka k výrobníku parafínu Teglu model FHC-2222

1. Úvod

This manual provides detailed instructions for the safe and effective use of your Teglu Paraffin Wax Machine Model FHC-2222. This device is designed for paraffin wax treatments for hands, feet, and elbows, offering a capacity of 4 liters and efficient heating capabilities. Please read this manual thoroughly before first use and retain it for future reference.

Image 1.1: The Teglu Paraffin Wax Machine FHC-2222 shown with included accessories such as paraffin wax blocks, thermal gloves, and a silicone brush.

2. Bezpečnostní pokyny

VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

• Always unplug the machine from the power outlet when not in use, before cleaning, or before adding/removing parts.
• Do not operate the machine with a damaged cord or plug, or if the machine malfunctions or has been damaged in any manner.
• Keep the machine away from water or other liquids. Do not immerse the machine in water.
• Do not touch hot surfaces. Use handles or knobs. The wax and internal components will be hot during and after operation.
• Ensure the machine is placed on a stable, heat-resistant surface during operation.
• Test the wax temperature on a small area of your skin (e.g., wrist) before immersing hands or feet to prevent burns.
• Tento spotřebič není určen k tomu, aby ho používaly osoby (včetně dětí) se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo nedostatkem zkušeností a znalostí, pokud na ně nebude dohlíženo nebo na ně nebude dohlížet osoba odpovědná za jejich bezpečnost nebo je poučit o používání spotřebiče. .
• Use only paraffin wax specifically designed for paraffin therapy.
• Do not add water or other substances to the wax.
• Do not use if you have open wounds, skin infections, or severe circulatory problems. Consult a physician if unsure.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x Teglu Paraffin Wax Machine (Model FHC-2222)
• 3 x 450g Paraffin Waxes (Lavender scent)
• 2 x Thermal Hand Gloves
• 100 x Plastic Gloves for Hands
• 100 x Plastic Gloves for Feet
• 1 x silikonový štětec
• 1 x Thermal Insulation Panel

4. Nastavení

1. Vybalte všechny součásti z krabice.
2. Place the paraffin wax machine on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the unit.
3. Ensure the power cord is not damaged and is within reach of a suitable electrical outlet.

5. Návod k obsluze

5.1. Melting the Paraffin Wax

1. Otevřete víko stroje.
2. Place the desired amount of paraffin wax blocks into the aluminum liner. The machine has a 4L capacity, suitable for immersing hands, elbows, or feet (up to EU shoe size 47).
3. Bezpečně zavřete víko.
4. Plug the machine into a power outlet. The display will illuminate.
5. Stisknutím tlačítka napájení zapněte stroj.
6. Set the desired melting temperature and time using the control panel. The machine can adjust temperature from 30°C to 70°C (86°F to 158°F). For 1350g (3 blocks) of paraffin, the melting time is approximately 45 minutes due to the 200W fast heating element and aluminum liner.
7. The machine will begin heating. The display will show a countdown of the heating time.
8. Once the wax is melted, the intelligent automatic lid opening feature will activate, opening the lid to a 90-degree angle to accelerate cooling to a safe application temperature (typically around 53°C). A beep will sound when the wax reaches the optimal temperature for use.

Image 5.1: Illustration of the 200W fast heating capability, showing 45 minutes for 3 packs of paraffin wax to melt.

Image 5.2: The intelligent automatic lid opening feature, which opens the lid to 90 degrees to facilitate cooling of the melted wax to the optimal temperature.

Image 5.3: A diagram illustrating the function description, including plugging in, pressing the switch, setting time, automatic lid opening, and cooling to 53°C.

5.2. Applying the Paraffin Wax

1. Once the wax has cooled to the appropriate temperature (around 53°C), place the thermal insulation panel into the melted wax. This panel helps prevent direct contact with the hot bottom of the machine.
2. Carefully dip your hand, foot, or elbow into the melted wax. Ensure the wax covers the desired area.
3. Remove the limb from the wax and allow the wax to solidify for a few seconds.
4. Repeat the dipping process 3 to 5 times to build up several layers of wax.
5. Immediately after the final dip, cover the waxed area with a plastic glove (provided).
6. For enhanced heat retention, place a thermal glove (provided) over the plastic glove.
7. Allow the wax to remain on the skin for approximately 15 minutes.
8. After 15 minutes, remove the thermal glove, then peel off the plastic glove and the solidified wax. The wax should come off easily.
9. Discard the used wax. Do not reuse wax that has been removed from the skin.

Image 5.4: Step-by-step guide for using the paraffin wax machine, including placing wax, inserting the grid, dipping hands, and wearing gloves.

6. Údržba

6.1. Čištění

1. Ensure the machine is unplugged and completely cooled before cleaning.
2. Once the remaining wax has solidified, gently remove it from the aluminum liner. You can often lift it out as a single block.
3. Wipe the interior and exterior surfaces of the machine with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte jednotku do vody.
4. Před uskladněním nebo dalším použitím se ujistěte, že jsou všechny díly suché.

6.2. Skladování

Store the machine in a cool, dry place, away from direct sunlight and out of reach of children.

7. Řešení problémů

• Stroj se nezapne: Zkontrolujte, zda je napájecí kabel bezpečně zapojený do zařízení i do elektrické zásuvky. Ujistěte se, že zásuvka je funkční.
• Wax not melting or melting slowly: Ensure the lid is closed properly during heating. Verify that the temperature setting is appropriate for melting (e.g., 70°C).
• Wax is too hot for application: The automatic lid opening feature is designed to cool the wax to a safe temperature. If it still feels too hot, allow additional cooling time before use. Always test a small amount on your wrist first.
• Wax is too cold for application: Increase the temperature setting slightly and allow the machine to reheat.

8. Specifikace

9. Záruka a podpora

No specific warranty information is provided in the product details. For warranty inquiries or technical support, please contact the manufacturer, Teglu, or your retailer directly. Retain your proof of purchase for any warranty claims.