ZÜNDAPP Kingmeter LED Display T320 Green 1.0 / Z101 / Z101+ User Manual

Zavedení

This manual provides essential information for the proper installation, operation, and maintenance of your ZÜNDAPP Kingmeter LED Display. This display is compatible with ZÜNDAPP Green 1.0, Z101, and Z101+ electric bicycles manufactured from July 2021 onwards. Please read these instructions carefully before use to ensure optimal performance and safety.

Konec produktuview

The ZÜNDAPP Kingmeter LED Display serves as the central control unit for your electric bicycle, providing critical information and allowing you to manage assistance levels.

Obraz: Přední view of the ZÜNDAPP Kingmeter LED Display, showing the power button, assist level buttons (+/-), and light control button. LED indicators for power and assist levels are visible at the top.

The display unit includes:

• LED indikátory: For battery charge level and pedal assistance level.
• Ovládací tlačítka: Four buttons for power, assistance level adjustment, and light control.
• Kabel: A 220 mm cable with a 5-pin round BUS connector.

Nastavení a instalace

Follow these steps to properly install the Kingmeter LED Display on your electric bicycle.

1. Montáž displeje:

   The display features a 22.2 mm clamp, suitable for most standard bicycle handlebars. Position the display on your handlebar in a location that is easily accessible and visible while riding, without obstructing other controls. Securely tighten the clamp šrouby.

   

   Obraz: Detailní záběr view of an electric bicycle handlebar with the ZÜNDAPP Kingmeter LED Display mounted. The display is centrally positioned for easy access and visibility.

2. Připojení kabelu:

   Locate the corresponding 5-pin round BUS connector on your electric bicycle's wiring harness. Carefully align the pins and push the display's connector firmly into place until it clicks. Ensure a secure connection to prevent moisture ingress and signal loss.

   

   Obraz: Detailní view of the 5-pin round BUS connector, showing the pin configuration. This connector is used to link the display to the e-bike's electrical system.

   

   Obraz: The rear side of the ZÜNDAPP Kingmeter LED Display, showing the integrated cable and a sticker indicating "36V", confirming its voltage kompatibilita.

Návod k obsluze

The Kingmeter LED Display features a simple 4-button interface for easy operation.

Obraz: Jasné view of the ZÜNDAPP Kingmeter LED Display, highlighting the four control buttons: Power (red), Plus (+), Minus (-), and Light (headlight icon). LED indicators for battery and assist levels are also visible.

• Zapnutí/vypnutí: Stiskněte a podržte červené tlačítko napájení (⑂) to turn the display and the e-bike system on or off.
• Úprava úrovně asistence:
  • Stiskněte tlačítko Tlačítko „+“ to increase the pedal assistance level.
  • Stiskněte tlačítko Tlačítko '-' to decrease the pedal assistance level.
  • The current assistance level (0, 1, 2, 3) is indicated by the LED lights. Level 0 means no assistance.
• Ovládání světla: Stiskněte tlačítko světelné tlačítko (🚲) to turn your e-bike's lights on or off.
• Indikátor stavu baterie: The "POWER" LED indicators at the top of the display show the remaining battery charge. "LOW" indicates a low battery level.

Údržba

To ensure the longevity and proper functioning of your Kingmeter LED Display, follow these simple maintenance guidelines:

• Čištění: Wipe the display surface with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit plastové a elektronické součástky.
• Ochrana proti vlhkosti: While the display is designed for outdoor use, avoid prolonged exposure to heavy rain or direct water jets. Ensure the connector is always securely fastened.
• Kontrola kabelů: Periodically check the cable and connector for any signs of wear, damage, or corrosion. Replace if necessary.
• Skladování: When not in use for extended periods, store the e-bike and display in a dry, temperate environment.

Odstraňování problémů

If you encounter issues with your Kingmeter LED Display, refer to the following common problems and solutions:

If you cannot resolve the issue using the troubleshooting guide, please contact ZÜNDAPP customer support or an authorized service center.

Specifikace

Záruka a podpora

For warranty information, please refer to the documentation provided with your electric bicycle or contact your point of purchase. For technical support or service inquiries, please visit the official ZÜNDAPP webnebo kontaktujte jejich oddělení zákaznických služeb.

Poznámka: Neoprávněné úpravy nebo opravy mohou vést ke zrušení záruky.