FLEXISPOT E6 Standing Desk User Manual

1. Úvod

Thank you for choosing the FLEXISPOT E6 Standing Desk. This electric height-adjustable desk is designed to enhance your workspace ergonomics, allowing seamless transitions between sitting and standing positions. This manual provides essential information for safe assembly, operation, and maintenance of your new desk.

Image 1.1: The FLEXISPOT E6 Standing Desk in a typical office setup.

2. Bezpečnostní informace

• Ensure the total weight on the desk does not exceed 220 lbs (100 kg).
• Adjust the desk height according to user comfort while maintaining stability.
• Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od stolu.
• Do not place hands or objects near moving parts to avoid injury or damage.
• Ensure all cables are properly managed to prevent tripping hazards and damage.
• Používejte pouze dodaný napájecí adaptér a kabely.

3. Obsah balení

Před zahájením montáže se prosím ujistěte, že jsou všechny komponenty přítomny:

• Pedestal (x2)
• Right Beam (x2)
• Left Beam (x2)
• Column (x2)
• Side Bracket (x2)
• Držák adaptéru (x1)
• Klávesnice (x1)
• Napájecí kabel (x1)
• Napájecí adaptér (x1)
• Extension Cord (x1)
• T-Socket Wrench (x1)
• Spona na kabel (x4)
• Desktop (x1)

4. Montážní návod

Follow these steps to assemble your FLEXISPOT E6 Standing Desk. It is recommended to have two people for assembly.

1. Assemble the Cross Beams: Connect the left and right beams using the provided screws and T-socket wrench. Ensure screws are aligned with square holes and pressed tightly.
2. Attach Pedestals to Columns: Secure the pedestals to the columns using the designated screws. Prioritize diagonal screws during this step for stability.
3. Connect Columns to Cross Beams: Attach the assembled column-pedestal units to the cross beams.
4. Instalace bočních konzol: Mount the side brackets to the frame using the appropriate screws.
5. Připojení plochy: Carefully place the desktop upside down on a soft, clean surface. Position the assembled frame onto the desktop. Ensure the distance between the supporting bracket and the edge of the tabletop does not exceed 200mm. Secure the frame to the desktop using the provided screws.
6. Install Keypad and Adapter Bracket: Attach the keypad to the underside of the desktop, ensuring it is on the same side as the adapter bracket. The curved edge of the keypad should be flush with the edge of the table top. Secure the adapter bracket.
7. Připojit kabely: Connect the motor cables from the columns to the control box. Connect the keypad cable to the control box. Plug the power adapter into the control box and then into a power outlet. Use cable clips to manage and secure all cables neatly.

Image 4.2: The assembled FLEXISPOT E6 Standing Desk ready for use.

5. Návod k obsluze

Your FLEXISPOT E6 Standing Desk features a quiet and smooth dual motor system for effortless height adjustment.

• Nastavení výšky: Use the up (▲) and down (▼) arrow buttons on the keypad to raise or lower the desk to your desired height. The current height will be displayed on the LED panel.
• 3-StagSystém e-výtahu: The desk offers a wide range of lifting space, from 23.6 inches to 48.8 inches, accommodating various user heights.
• Tichý provoz: The dual motors operate at less than 50 dB, ensuring minimal noise disruption.

Image 5.1: The intelligent keypad for height adjustment and memory settings.

6. Programovatelný regulátor

The intelligent keypad allows you to save and recall your preferred desk heights:

1. Nastavení pozice v paměti: Adjust the desk to your desired height using the up/down arrows. Press the 'M' button, then press one of the numbered memory buttons (1, 2, 3, or 4) within 3 seconds to save the current height.
2. Vyvolání pozice z paměti: Simply press the corresponding numbered memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.
3. Protikolizní systém: The desk is equipped with an anti-collision system to detect and prevent collisions during height adjustment, improving safety.

7. Specifikace

Image 7.1: Detailed dimensions and height ranges of the FLEXISPOT E6 desk.

Image 7.2: The desk demonstrating its 220 lbs maximum load capacity.

8. Údržba

• Čištění: Otřete pracovní plochu a rám měkkým hadříkemamp hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Správa kabelů: Regularly check and reorganize cables to prevent tangles and damage.
• Inspekce: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevné a bezpečné.

9. Řešení problémů

If you encounter any issues with your FLEXISPOT E6 Standing Desk, please refer to the following common solutions:

• Stůl se nehýbe: Check all cable connections, especially the power adapter and motor cables. Ensure the power outlet is functional.
• Nerovnoměrná výška: Perform a reset by holding down the 'M' button for 5-10 seconds until the desk moves to its lowest position and then slightly rises.
• Kódy chyb: Refer to the specific error code displayed on the keypad and consult the FLEXISPOT support webnebo se obraťte na zákaznický servis.

10. Záruka a podpora

FLEXISPOT stands behind the quality of its products:

• Záruka: Enjoy peace of mind with our 5-year coverage on the desk frame and motor, and 2-year protection on the control panel and electronics.
• Vrácení: Toto zboží je možné vrátit do 31. ledna 2026.
• Zákaznická podpora: For any assistance, please contact FLEXISPOT customer support. Visit the official Obchod FLEXISPOT pro více informací a možnosti kontaktu.