Walfront WALFRONT5u8toxmh19

Walfront WALFRONT5u8toxmh19 Metal Detector User Manual

Model: WALFRONT5u8toxmh19

Konec produktuview

The Walfront WALFRONT5u8toxmh19 is a long-range metal detector designed for various applications including security inspection, archaeological exploration, and mineral prospecting. It features a micro-electronic processor for precise calibration and a self-test system for efficient scanning.

Klíčové vlastnosti

  • Vícenásobné použití: Suitable for security inspection, archaeology, and outdoor prospecting.
  • Vysoká účinnost: Utilizes a micro-electronic processor for chip unit calibration and a self-test system for quick and convenient scanning.
  • Pokročilá detekce: Equipped with a long-range search system and accurate position detection for high sensitivity and stability.
  • Typy detekce: Identifies specific metal types via a frequency regulator, capable of detecting gold, silver, copper, conventional precious metals (Pd, Pt), and precious stones (diamond, emerald, ruby, etc.).
  • Nabíjecí baterie: Both the detector and receiver include built-in rechargeable NiCr batteries (2000mAh) for extended use.

Obsah balení

Zkontrolujte prosím, zda jsou ve vašem balení přítomny všechny níže uvedené položky:

  • 1 x Detector
  • 1x Přijímač
  • 3 x Signal Rods
  • 1 x Adaptér
  • 1 x Uživatelská příručka
  • 1 x úložný box
Walfront WALFRONT5u8toxmh19 Metal Detector components laid out in its protective case.
Walfront WALFRONT5u8toxmh19 Metal Detector components laid out in its protective case.

Nastavení

Nabíjení zařízení

Before initial use, ensure both the detector and receiver are fully charged using the provided adapter. Connect the adapter to the charging port on each unit. The charging indicator will illuminate during charging and change color or turn off when fully charged.

Sestavení detektoru

  1. Carefully remove the detector and receiver from the storage box.
  2. Attach the signal rods to the designated ports on the detector unit. Ensure they are securely fastened.
  3. If applicable, attach any additional antennas or components as shown in the diagram.
Assembled Walfront WALFRONT5u8toxmh19 Metal Detector with screen and antennas.
Assembled Walfront WALFRONT5u8toxmh19 Metal Detector with screen and antennas.

Návod k obsluze

Powering On and Selecting Target

To power on the detector, press and hold the power button until the indicator lights activate. Use the frequency regulator to select the specific type of metal you wish to detect (e.g., gold, silver, copper). The corresponding indicator light will illuminate.

Walfront WALFRONT5u8toxmh19 Metal Detector indicating detection of various metals underground.
Walfront WALFRONT5u8toxmh19 Metal Detector indicating detection of various metals underground.

Postup skenování

Hold the detector firmly with a stable body. Scan slowly across the search area. Maintain the receiving antenna at a 90-degree angle to your body. Důležité: Do not deflect the receiving antenna to the left or right sides during scanning. This ensures accurate signal reception.

Walfront WALFRONT5u8toxmh19 Metal Detector in use, showing detection waves penetrating the ground to locate targets.
Walfront WALFRONT5u8toxmh19 Metal Detector in use, showing detection waves penetrating the ground to locate targets.

Interpreting Signals

The detector will provide visual and/or auditory feedback when a target is detected. The intensity or specific pattern of the signal may indicate the proximity and size of the detected object. Refer to the device's display for more detailed information on the detected metal type.

Údržba

  • Keep the device clean and free from dust and dirt. Use a soft, dry cloth for cleaning.
  • Store the detector and its components in the provided storage box when not in use to protect them from damage.
  • Nevystavujte zařízení extrémním teplotám nebo vlhkosti.
  • Regularly check the charging ports and connections for any signs of wear or damage.

Odstraňování problémů

Zařízení se nezapíná

  • Ensure the batteries are fully charged. Connect the adapter and allow sufficient charging time.
  • Verify that the power button is pressed correctly.

Inaccurate Detection or No Signal

  • Check that the signal rods and antennas are securely attached.
  • Ensure you are scanning slowly and maintaining the receiving antenna at a 90-degree angle to your body.
  • Confirm that the correct metal type is selected using the frequency regulator.
  • Environmental interference can affect performance. Try moving to a different location.

Krátká životnost baterie

  • Před každým použitím se ujistěte, že je zařízení plně nabité.
  • Battery performance can degrade over time. If issues persist, contact customer support.

Specifikace

FunkceDetail
Typ položkyDetektor kovů
MateriálABS, Sponge Coating
Baterie detektoruBuilt-in rechargeable battery (NiCr) 2000mAh
Baterie přijímačeBuilt-in rechargeable battery (NiCr) 2000mAh
Detected ObjectsGold, silver, copper, conventional precious metals (Pd, Pt), precious stones (diamond, emerald, ruby, etc.)
Rozsah vyhledáváníPřibližně 1500 metru / 4921.3 stopy
Hloubka detekceApprox. 50 meters / 164 feet maximum
Přenosová frekvence5.6-6 kHz
ZnačkaWalfront
Číslo modeluWALFRONT5u8toxmh19
Hmotnost položky6.93 libry
Zdroj napájeníNapájení z baterie
Nastavitelná délkaAno
Provozní frekvence6 kHz

Záruka a podpora

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Walfront webwebu. Uschovejte si účtenku jako doklad o koupi.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.