KKmoon KKM828 2-in-1 Digital Multimeter with Oscilloscope User Manual

1. Úvod

The KKmoon KKM828 is a versatile 2-in-1 device combining the functionalities of a digital multimeter and an oscilloscope. Designed for efficiency and accuracy, it features a 2.4-inch color display, a 1MHz bandwidth for AC voltage, and a 2.5Msps real-time sampling rate. This manual provides essential information for safe and effective operation of your KKM828 device.

2. Bezpečnostní informace

Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or damage to the device or other equipment.

• Always ensure the device is in good working condition and free from damage before use.
• Neaplikujte voltage or current that exceeds the maximum limits specified in the technical specifications.
• Buďte opatrní při práci s objtages above 24V, as they pose a shock hazard. The device will emit an audible warning if the input voltage přesahuje 24 V.
• Před měřením se ujistěte, že je vybrána správná funkce a rozsah.
• Pro zajištění přesných údajů vyměňte baterie ihned po zobrazení indikátoru slabé baterie.
• The device is equipped with double fuses (500mA/250V and 10A/250V) for protection. Do not bypass or use incorrect fuse types.
• Nepoužívejte zařízení ve vlhkém prostředí nebo ve výbušné atmosféře.
• Refer to the "Maintenance" section for proper cleaning and storage procedures.

3. Konec produktuview

The KKmoon KKM828 integrates a digital multimeter and an oscilloscope into a compact, handheld unit. Key components and features are detailed below.

3.1 Klíčové vlastnosti

• Funkce 2 v 1: Combines a digital multimeter and an oscilloscope.
• Zobrazit: 2.4-inch 320x240 LCM color screen for clear readings and waveform display.
• Oscilloscope Performance: 1MHz ACV bandwidth, 2.5Msps real-time sampsazba lingu.
• Funkce multimetru: Měří AC/DC objtage, AC/DC current, resistance, capacitance, frequency, duty cycle, diode, and continuity.
• Úložiště dat: Stores up to 100 sets of data and 10 waveforms.
• Uživatelské rozhraní: Silicone buttons and a pressure-sensitive dial for precise function selection.
• Ergonomie: Integrated back bracket for a 60° viewúhel.
• Bezpečnost: Double fuse protection (500mA/250V, 10A/250V) and input voltage varování.

3.2 Součásti zařízení

Pro více informací se podívejte na obrázek níže.view of the device's main components.

Figure 1: KKM828 Product Details. This image highlights the device's HD color screen (01), the function dial for accurate gear changes (02), and the back bracket (03) for easy viewIng.

• HD obrazovka: 2.4-inch color screen for clear display of measurements and waveforms.
• Volič funkcí: Rotary switch for selecting measurement functions (voltage, current, resistance, etc.) and oscilloscope mode.
• Buttons (F1-F4, R, S): Used for navigating menus, selecting ranges, holding data, and other specific functions.
• Vstupní konektory: Terminals for connecting test leads for various measurements (e.g., VΩHz, mA, 10A, COM).
• Zadní držák: Foldable stand for propping up the device at a 60° angle for convenient viewIng.

4. Nastavení

4.1 Instalace baterie

The KKM828 requires three AA batteries for operation. Ensure the device is powered off before installing or replacing batteries.

1. Vyhledejte kryt přihrádky na baterie na zadní straně zařízení.
2. Open the battery compartment cover by sliding or unscrewing it (if applicable).
3. Insert three AA batteries, observing the correct polarity (+ and -) as indicated inside the compartment.
4. Bezpečně zavřete kryt bateriového prostoru.

4.2 Zapnutí/vypnutí

To power on the device, rotate the function dial from the "OFF" position to any desired measurement function. To power off, rotate the dial back to the "OFF" position.

5. Návod k obsluze

5.1 Funkce multimetru

The KKM828 offers a comprehensive range of multimeter measurement capabilities. Always connect test leads correctly to the appropriate input jacks (e.g., COM, VΩHz, mA, 10A) for the selected function.

• AC/DC Voltage Měření: Rotate the dial to the 'V~' or 'V=' position. Connect test leads in parallel with the circuit.
• Měření AC/DC proudu: Rotate the dial to the 'mA~', 'mA=', '10A~', or '10A=' position. Connect test leads in series with the circuit.
• Měření odporu: Rotate the dial to the 'Ω' position. Ensure the circuit is de-energized before measuring resistance.
• Měření kapacity: Rotate the dial to the 'mF' position. Discharge capacitors before measurement.
• Měření frekvence a pracovního cyklu: Rotate the dial to the 'Hz%' position.
• Test diod: Rotate the dial to the 'Diode' position. Connect leads across the diode to check forward voltage pokles.
• Test kontinuity: Rotate the dial to the 'Continuity' position. The device will beep if resistance is below approximately 50Ω.

Figure 2: Multimeter Measurement Examples. This image illustrates the display during Frequency, Duty Cycle, Diode Test, and Continuity measurements, demonstrating the device's various multimeter functions.

5.2 Funkce osciloskopu

The KKM828 features a convenient one-button oscilloscope for waveform analysis.

1. Rotate the function dial to the 'Graphical' (oscilloscope) mode.
2. Connect the test leads to the circuit where you wish to observe the waveform.
3. The device will automatically display the waveform. Use the secondary display at the bottom to view parameters such as Peak-to-Peak voltage (VP-P), average value, RMS value, frequency, time base, and amplituda.
4. Measurement modes include 'Normal' and 'Automatic'. The device can quickly and accurately measure and display waveforms.

Figure 3: Oscilloscope Waveform Display. This image shows examples of different electrical waveforms (sine, square, pulse, complex) as displayed on the KKM828's oscilloscope screen, along with key measurement parameters.

5.3 Ukládání a vyvolání dat

The KKM828 can store up to 100 sets of measurement data and 10 waveforms for later review.

• Specific instructions for saving and recalling data are typically accessed via the function buttons (e.g., 'S' for Save, 'R' for Recall) in relevant measurement modes. Refer to the on-screen prompts for detailed operation.
• The device allows for simultaneous display of historical records and real-time data for easy comparison and analysis.

6. Údržba

6.1 Čištění

To clean the device, wipe the casing s reklamouamp cloth and a mild detergent. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from any circuits before cleaning. Do not allow moisture to enter the device.

6.2 Výměna baterie

When the low battery indicator appears on the display, replace the three AA batteries as described in the "Battery Installation" section (4.1). Always use fresh batteries of the same type.

6.3 Skladování

When not in use for extended periods, remove the batteries to prevent leakage. Store the device in a cool, dry place within the specified storage environment: -10°C to 60°C, with relative humidity less than 90% RH.

7. Řešení problémů

This section addresses common issues you might encounter with your KKM828 device.

8. Specifikace

The following table details the technical specifications of the KKmoon KKM828.