KEF R3WG

KEF R3 Meta Bookshelf Speakers Instruction Manual

Model: R3WG

1. Úvod a konecview

The KEF R3 Meta Bookshelf Speakers are engineered to deliver high-fidelity audio performance. This model incorporates advanced acoustic technologies to provide a clear and natural sound experience. The R3 Meta is a true three-way design, sharing core driver technology with the R11 Meta, the flagship model in the R Series.

Mezi klíčové vlastnosti patří:

  • Pole měničů Uni-Q 12. generace: This coaxial driver design integrates the tweeter and midrange unit, ensuring a single point source for sound, which enhances stereo imaging and soundstage přesnost.
  • Technologie absorpce metamateriálů (MAT™): This innovative technology is designed to absorb 99% of unwanted sound from the rear of the tweeter, eliminating distortion and resulting in a purer, more natural high-frequency response.
  • 6.5-inch Hybrid Aluminium Bass Driver: A powerful bass driver provides deep, controlled, and articulate low-frequency reproduction.
  • Všestranné umístění: Designed for shelf mounting, these speakers are suitable for various room sizes and setups.
KEF R3 Meta Bookshelf Speaker, front view s mřížkou

Přední view of the KEF R3 Meta Bookshelf Speaker with its protective grille.

KEF R3 Meta Bookshelf Speaker, front view bez mřížky

Přední view of the KEF R3 Meta Bookshelf Speaker, showcasing the Uni-Q driver array and bass driver.

KEF R3 Meta Bookshelf Speaker, side view

Strana view of the KEF R3 Meta Bookshelf Speaker.

2. Nastavení

Proper setup is crucial for optimal performance of your KEF R3 Meta speakers. Consider the following guidelines:

2.1 Umístění

  • Typ montáže: These are bookshelf speakers, designed for shelf mounting or placement on dedicated speaker stands. KEF S2 Speaker stands are sold separately and are recommended for optimal acoustic performance and stability.
  • Akustika místnosti: Place speakers symmetrically in your listening room. Experiment with distance from walls and corners to achieve the best bass response and soundstage.
  • Pozice poslechu: Position the speakers so that the Uni-Q driver array is roughly at ear level when seated in your primary listening position.
  • Rozměry: Each speaker measures approximately 13.2 inches (D) x 16 inches (W) x 16.6 inches (H). Ensure adequate space for placement and ventilation.

2.2 Připojení

Connect your KEF R3 Meta speakers to a suitable amplifier using high-quality speaker cables. Ensure correct polarity (positive to positive, negative to negative) for both speakers and the ampživější.

  • Impedance: The speakers have an impedance of 4 Ohms. Ensure your amplifier is stable with a 4-Ohm load.
  • Manipulace s energií: The speakers can handle a maximum output power of 400 Watts. Match your amplifier's power output appropriately to avoid damage.
  • Zdroj napájení: Jsou to pasivní reproduktory a vyžadují externí... ampzachránce pro moc.

3. Provoz

The KEF R3 Meta speakers are designed for a wide range of home entertainment applications, providing stereo audio output.

3.1 Přehrávání zvuku

  • Režim výstupu zvuku: Stereo. For surround sound systems, additional speakers (e.g., center channel, surrounds, subwoofers) will be required.
  • Doporučená použití: Ideal for music players, gaming consoles, DVD players, and enhancing television audio. They are suitable for home entertainment setups.

3.2 Konektivita

The KEF R3 Meta speakers support Bluetooth wireless communication for convenient streaming from compatible devices.

  • Bezdrátová technologie: Bluetooth.
  • Rozsah Bluetooth: Up to 10 meters (approximately 33 feet).
  • Způsob ovládání: App control is available for managing settings and playback from your smart device.

4. Údržba

To ensure the longevity and optimal performance of your KEF R3 Meta speakers, follow these maintenance guidelines:

  • Čištění: Gently wipe the speaker cabinets with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
  • Grily: The micro-perforated grilles are covered with Alcantara. Clean them carefully with a soft brush or a slightly damp tkanina.
  • Ochrana proti prachu: Keep the speakers free from dust accumulation, especially around the drivers.
  • Podmínky prostředí: Use the speakers indoors only. Avoid exposure to direct sunlight, extreme temperatures, high humidity, or moisture.
  • Ochrana řidiče: Avoid touching the speaker drivers directly, as this can cause damage.

5. Řešení problémů

If you encounter issues with your KEF R3 Meta speakers, consider the following common troubleshooting steps:

  • Žádný zvuk:
    • Zkontrolujte všechna kabelová připojení mezi reproduktory a ampUjistěte se, že jsou bezpečně a správně připojeny (kladný pól k kladnému, záporný k zápornému).
    • Ověřte ampje lifier zapnutý a je vybrán správný vstupní zdroj.
    • Ujistěte se, že máte hlasitost amplifier and source device is not muted or set too low.
  • Zkreslený zvuk:
    • Snižte hlasitost na vašem amplifier and source device. Overdriving the speakers can cause distortion.
    • Zkontrolujte připojení kabelů reproduktorů, zda nejsou uvolněné nebo zkratované.
    • Ujistěte se, že vaše amplifier's power output is suitable for the speakers' impedance and power handling.
  • Nerovnoměrný zvuk nebo špatný obraz:
    • Verify speaker placement. Ensure both speakers are equidistant from the listening position and have similar distances from side and rear walls.
    • Zkontrolujte, zda jsou oba reproduktory připojeny se správnou polaritou.
  • Problémy s připojením Bluetooth:
    • Ensure the speakers are in Bluetooth pairing mode (refer to your amplifier's manual for details on connecting to passive Bluetooth speakers if applicable, or the KEF app).
    • Move the source device closer to the speakers to ensure it is within the 10-meter Bluetooth range.
    • Zkuste zařízení zrušit a znovu spárovat.

If problems persist, consult the KEF support resources or contact customer service.

6. Specifikace

FunkceSpecifikace
Název modeluR3 meta
Číslo modelu položkyR3WG
Typ reproduktoruRegál
Typ montážePolicový držák
BarvaBílý
Rozměry produktu (D x Š x V)13.2" x 16" x 16.6" (33.5 cm x 40.6 cm x 42.2 cm)
Hmotnost položky28.4 Kilograms (62.5 pounds) per speaker
Impedance4 ohmů
Maximální výstupní výkon reproduktoru400 wattů
Frekvenční odezva (±3dB)58 Hz - 28 kHz
Typ zvukového ovladačeHybrid Driver (Uni-Q with MAT, Bass Driver)
Průměr basového reproduktoru6.5 palce
Průměr výškového reproduktoru25.4 Millimeters (integrated into Uni-Q)
Technologie připojeníBluetooth
Dosah Bluetooth10 metrů
Kontrolní metodaApp
Vnitřní/venkovní použitíKrytý
UPC637203049675

7. Co je v krabici

Upon unpacking your KEF R3 Meta speakers, you should find the following items:

  • 1 Pair of KEF R3 Meta Speakers

Please inspect all contents for any damage or missing parts immediately after opening.

8. Oficiální video produktu

Pro vizuální přehledview of the KEF R Series Meta speakers and their innovative technologies, please watch the official product video below.

Official KEF R Series Meta product video, detailing design and technology. This video provides insights into the Metamaterial Absorption Technology (MAT) and Uni-Q driver array.

9. Záruka a podpora

Your KEF R3 Meta speakers are backed by a manufacturer's warranty to ensure your peace of mind.

  • Typ záruky: 5letá záruka výrobce.

For detailed warranty terms, product registration, technical support, or service inquiries, please visit the official KEF webwebové stránky nebo se obraťte přímo na jejich zákaznickou podporu. Uschovejte si doklad o koupi pro případ reklamace.

© 2023 KEF. Všechna práva vyhrazena. Informace v této příručce se mohou změnit bez předchozího upozornění.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.