MONDAWE 9-Inch Wall Mounted Shower Faucet Set with Tub Spout

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your MONDAWE 9-Inch Wall Mounted Shower Faucet Set with Tub Spout. Please read this manual thoroughly before installation and keep it for future reference. Proper installation and care will ensure optimal performance and longevity of your shower system.

Nadview of the MONDAWE 9-Inch Wall Mounted Shower Faucet Set with Tub Spout.

2. Bezpečnostní informace

WARNING: Failure to follow these instructions could result in personal injury or property damage.

• Před zahájením jakýchkoli instalatérských prací vždy uzavřete hlavní přívod vody.
• Používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
• Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným instalatérem.
• Ujistěte se, že všechna spojení jsou bezpečná a vodotěsná, aby se zabránilo únikům.
• The pressure balance valve is designed to protect against sudden changes in water temperature. Do not tamps touto komponentou.

3. Obsah balení

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, please contact MONDAWE customer service.

All components included in the MONDAWE 9-Inch Wall Mounted Shower Faucet Set with Tub Spout.

• Sprchová hlavice
• Sprchové rameno
• Ruční sprchový sprej
• Sprchové hadice
• Slide Bar with Holder
• Vana výtok
• Pressure Balance Valve (with trim and handle)
• Montážní materiál (šrouby, hmoždinky)
• Installation Manual / Service Card

4. Specifikace

5. Instalace

5.1. Požadované nástroje a materiály

• Instalatérský tmel
• Klíč
• Drážkový šroubovák
• Elektrická vrtačka
• Měřicí páska
• Tužka
• Caulking Gun with Silicone Sealant

5.2. Kroky instalace

Refer to the following video for a general installation guide. Note that the specific model shown may differ, but the connection types and installation steps are similar. Always refer to the actual product and the installation instructions included in your package for precise details.

1. Připravte zeď: Ensure the rough-in valve is securely installed within the wall according to standard plumbing practices. The finished wall should be ready for trim installation.
2. Outline the Panel: Place the decorative panel over the installed valve. Use a pencil to draw an outline of the panel along its edge on the wall tile. This helps in precise cutting if needed.
3. Remove Existing Trim (if applicable): If replacing an existing fixture, carefully remove the old handle, diverter knob, and panel.
4. Cut for Panel Recess: Use a suitable cutter to carefully cut along the marked lines on the wall tile. This allows the panel to sit flush or be slightly recessed into the wall. Exercise caution to avoid damaging internal pipes or the valve body.
5. Install Panel and Knobs: Position the new decorative panel. Install the water distribution knob (diverter) and the main handle onto the valve stem. Ensure they are properly aligned and secured.
6. Mezery těsnění: After the panel is embedded, apply silicone sealant or glass glue around the edges of the panel where it meets the wall to create a watertight seal.
7. Install Shower Arm and Rainfall Head: Thread the shower arm into the wall connection. Apply plumber's tape to the threads for a secure seal. Attach the rainfall shower head to the shower arm. Ensure the adjustable angle connector is tightened for desired positioning.


The rainfall shower head features an adjustable angle connector and easy-clean silicone nozzles for consistent water flow.

8. Instalace výtoku vany: Secure the tub spout to its wall connection. Ensure it is level and tightly sealed to prevent leaks.


The bathtub spout provides high flow and is designed to be splashproof.

9. Install Slide Bar and Handheld Shower: Mount the slide bar to the wall using the provided hardware. Attach the handheld shower hose to the valve outlet and the handheld shower spray. Place the handheld shower in its adjustable holder on the slide bar.


The height-adjustable slide bar accommodates users of different heights.

10. Zkouška těsnosti: Turn on the main water supply and check all connections for leaks. Operate the shower system to ensure all functions work correctly.

5.3. Rozměry

Detailed dimensions of the shower system components for accurate installation planning.

6. Provoz

Your MONDAWE shower system is designed for ease of use with a single handle for temperature and flow control, and a diverter knob for selecting spray functions.

The control panel allows easy adjustment of water temperature, flow, and selection of shower functions.

• Průtok a teplota vody: The main handle controls both water flow and temperature. Lift the handle to turn on the water and adjust the flow. Rotate the handle left for hot water and right for cold water.
• Výběr funkce: The diverter knob allows you to switch between the rainfall shower head, handheld shower, and bathtub spout. Only one function can be active at a time. Rotate the knob to select your desired water outlet.
• Nastavení ruční sprchy: The handheld shower features three spray patterns: rainfall, massage, and mixed mode. Adjust the spray by rotating the shower head face or a selector on the head itself.


The handheld shower offers three distinct spray patterns for a personalized experience.

7. Údržba

Regular cleaning and maintenance will help preserve the finish and functionality of your MONDAWE shower system.

• Čištění povrchové úpravy: Matný černý povrch očistěte měkkým hadříkemamp hadříkem a jemným mýdlem. Nepoužívejte abrazivní čisticí prostředky, agresivní chemikálie ani drátěnky, protože by mohly poškodit povrchovou úpravu.
• Cleaning Silicone Nozzles: The rainfall shower head and handheld shower feature easy-clean silicone nozzles. To remove mineral buildup, gently rub the nozzles with your finger or a soft brush.
• Zkontrolujte netěsnosti: Periodically inspect all connections for any signs of leaks. Tighten connections as needed.
• Údržba ventilů: The pressure balance cartridge is designed for long-term reliability. If you experience issues with temperature regulation, consult a professional plumber.

8. Řešení problémů

If you encounter any issues with your shower system, refer to the following common problems and solutions:

9. Záruka a podpora

MONDAWE products are manufactured to high-quality standards. While specific warranty details are not provided in this document, MONDAWE typically offers a limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical assistance, missing parts, or warranty inquiries, please contact MONDAWE customer service through the retailer where you purchased the product or visit the official MONDAWE webstránky pro kontaktní informace podpory.

We are committed to providing a satisfactory experience with your MONDAWE shower system.