WORKPRO W159032AE

Uživatelská příručka k akumulátorovým nůžkám na trávu a vyžínači 2 v 1 WORKPRO W159032AE

Model: W159032AE | Brand: WORKPRO

1. Důležité bezpečnostní informace

Před použitím tohoto výrobku si přečtěte všechna bezpečnostní varování a pokyny. Nedodržení varování a pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.

2. Konec produktuview

The WORKPRO W159032AE is a versatile 2-in-1 cordless tool designed for grass shearing and shrub trimming. It features a lightweight design and a powerful motor for efficient garden maintenance.

WORKPRO Cordless 2-in-1 Grass Shear and Shrubbery Trimmer with accessories

Image: The WORKPRO Cordless 2-in-1 Grass Shear and Shrubbery Trimmer with its two interchangeable blades and USB-C charging cable.

Komponenty:

Diagram of WORKPRO Trimmer components

Image: Detailed diagram showing the Type-C charging socket, Charger LED Indicator, Safety Lock-off Button, ON/OFF Switch, Shrub Blade, Blade Release Button, Grass Cutter Blade, and TPR Anti-Slip Handle.

3. Nastavení

3.1 Nabíjení baterie

The trimmer is equipped with a 2000mAh high-capacity Lithium-Ion battery. Before first use, or if the battery is low, charge the unit fully.

  1. Locate the Type-C charging socket on the trimmer unit.
  2. Connect the provided USB-C charging cable to the trimmer.
  3. Plug the other end of the USB-C cable into a compatible power source (5V/2A mobile phone charger, laptop/PC, car charger, or power bank USB port).
  4. The Charger LED Indicator will show the charging status (e.g., red for charging, green for fully charged).
  5. Plné nabití obvykle trvá přibližně 2–3 hodiny.
WORKPRO Trimmer USB-C Charging

Image: The trimmer connected via USB-C cable to a wall adapter, showing the charging indicator lights (red for charging, green for fully charged).

3.2 Attaching/Changing Blades

The trimmer comes with two interchangeable blades: a grass shear blade and a shrub blade. Blade replacements are simple, fast, and do not require any tools.

  1. Ujistěte se, že je zastřihovač vypnutý a odpojený od jakéhokoli zdroje napájení.
  2. To remove an installed blade, locate the two blade release buttons on either side of the blade housing.
  3. Press both blade release buttons simultaneously and gently pull the blade assembly away from the main unit.
  4. To attach a new blade, align the new blade assembly with the main unit.
  5. Push the blade assembly firmly into place until it clicks, ensuring both blade release buttons snap back into their locked position.
Easy and Safe Blade Replacement

Image: Close-up showing the blade release buttons for easy and safe blade replacement.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

The trimmer features an ergonomic dual-lock safety mechanism to prevent accidental startup.

  1. To turn on the trimmer, first push the Safety Lock-off Button located at the top of the handle.
  2. While holding the safety button, press and hold the ON/OFF Switch (trigger).
  3. You may release the Safety Lock-off Button once the trimmer is running, continuing to hold the ON/OFF Switch for operation.
  4. To turn off the trimmer, release the ON/OFF Switch.
Ergonomic Safety Lock for WORKPRO Trimmer

Image: Illustration demonstrating the two-step process to activate the trimmer using the ergonomic safety lock and ON/OFF switch.

4.2 Používání nože nůžek na trávu

The grass shear blade is ideal for precise trimming of lawn edges and small grass areas.

WORKPRO Trimmer in Grass Shear Mode

Image: The trimmer in grass shear mode, showing its maximum cutting width of 4.17 inches (106mm) for efficient trimming.

4.3 Using the Shrub Blade

The shrub blade is designed for shaping hedges, cleaning small shrubs, and trimming twigs.

WORKPRO Trimmer in Hedge Trimmer Mode

Image: The trimmer in hedge trimmer mode, illustrating its maximum cutting length of 5.90 inches (150mm) and maximum cutting thickness of 0.31 inches (7.95mm).

5. Údržba

5.1 Údržba baterie

5.2 Údržba kotouče

6. Řešení problémů

If you encounter any issues with your WORKPRO trimmer, please refer to the following common troubleshooting steps:

For further assistance, please contact WORKPRO customer support.

7. Specifikace

FunkceDetail
ZnačkaWORKPRO
Zdroj napájeníNapájení z baterie
BarvaBílý
Rozměry produktu10.24 cm D x 2.36 cm Š x 4.13 cm V
Hmotnost položky2.16 libry
Blade Length (Shrub)5.9 palce
Cutting Width (Grass)4.17 palce
MateriálKov, Plast
Materiál čepeleKov
svtage7.2 V (DC)
Číslo modelu položkyW159032AE
BaterieVyžaduje 1 lithium-iontovou baterii (součástí balení)
UPC820909687481

8. Záruka a podpora

For warranty information, product registration, or technical support, please visit the official WORKPRO webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.