PCCOOLER Paladin EX400

PCCOOLER Paladin EX400 CPU Cooler Instruction Manual

Model: Paladin EX400

Zavedení

The PCCOOLER Paladin EX400 is a premium CPU air cooler designed to provide efficient heat dissipation for various Intel and AMD platforms. Featuring a 130mm PWM fan, 4 direct-touch heatpipes, and a large thermal surface area, it is engineered for optimal cooling performance with a TDP of up to 180W. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure proper use and longevity of your CPU cooler.

Obsah balení

Please verify that all components are present before proceeding with the installation. If any parts are missing or damaged, please contact customer support.

  • PCCOOLER Paladin EX400 CPU Cooler (Heatsink with pre-installed fan)
  • Intel Mounting Bracket Kit (LGA 1700/1200/115X)
  • AMD Mounting Bracket Kit (AM4/AM5)
  • Backplate (Universal or specific for Intel/AMD)
  • Termální pasta
  • Montážní šrouby a podložky
  • Uživatelská příručka (tento dokument)
PCCOOLER Paladin EX400 CPU Cooler front view

Obrázek: Přední strana view of the PCCOOLER Paladin EX400 CPU Cooler, showing the 130mm fan and heatsink fins.

Nastavení a instalace

Before installation, ensure your system is powered off and disconnected from the power source. Refer to your motherboard manual for specific instructions on CPU and RAM installation if not already done. This cooler supports Intel LGA 1700/1200/115X and AMD AM4/AM5 sockets.

1. Příprava základní desky

  • For Intel Platforms (LGA 1700/1200/115X):
    1. Install the appropriate backplate onto the rear of the motherboard, aligning the holes with the CPU socket mounting holes.
    2. Secure the standoffs through the front of the motherboard into the backplate.
  • For AMD Platforms (AM4/AM5):
    1. Remove the existing plastic retention modules from the motherboard, but keep the original backplate.
    2. Install the AMD standoffs onto the original backplate's mounting holes.
PCCOOLER Paladin EX400 CPU Cooler top view with mounting hardware

Obrázek: Nahoře view of the PCCOOLER Paladin EX400 CPU Cooler, showing the fan and base with mounting hardware.

2. Apply Thermal Paste

  • Clean the CPU surface thoroughly with isopropyl alcohol to remove any dust or old thermal paste.
  • Apply a small, pea-sized amount of thermal paste to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.

3. Mount the CPU Cooler

  • Place the cooler's mounting brackets onto the standoffs on the motherboard.
  • Carefully align the heatsink over the CPU, ensuring the base makes full contact with the thermal paste.
  • Secure the cooler by tightening the spring-loaded screws in a diagonal pattern until snug. Do not overtighten.
PCCOOLER Paladin EX400 CPU Cooler side view

Obrázek: Boční view of the PCCOOLER Paladin EX400 CPU Cooler, highlighting the heatsink fins and heatpipes.

4. Connect the Fan

  • Connect the 4-pin PWM fan cable from the cooler to the "CPU_FAN" header on your motherboard.
  • Ensure the cable is routed neatly and does not obstruct airflow.
PCCOOLER Paladin EX400 fan specifications and features

Image: Diagram illustrating the 120mm fan, its airflow, noise level, and RPM range, emphasizing its quiet and efficient operation.

Návod k obsluze

Once installed, the PCCOOLER Paladin EX400 operates automatically. The PWM fan adjusts its speed based on CPU temperature, ensuring optimal cooling and noise levels.

  • Počáteční spuštění: After installation, power on your system. Enter the BIOS/UEFI settings to confirm the CPU fan is detected and operating correctly.
  • Monitorování teploty: Use motherboard monitoring software or third-party tools to observe CPU temperatures under idle and load conditions. Ensure temperatures remain within safe operating limits for your CPU model.
  • Ovládání rychlosti ventilátoru: The 4-pin PWM connection allows the motherboard to dynamically control fan speed. You can often adjust fan curves in your motherboard's BIOS/UEFI settings or through dedicated software for customized performance.

Údržba

Regular maintenance helps ensure optimal performance and extends the lifespan of your CPU cooler.

  • Odstranění prachu: Periodically (every 3-6 months, depending on environment) use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan is held stationary while cleaning to prevent damage to the bearings.
  • Kontrola ventilátoru: Check the fan for any signs of wear, damage, or excessive noise. If the fan is faulty, it may need replacement.
  • Teplovodní pasta: Reapplying thermal paste is generally not required unless the cooler is removed. If you remove the cooler, clean both the CPU and cooler base thoroughly and apply new thermal paste before reinstallation.

Odstraňování problémů

If you encounter issues with your PCCOOLER Paladin EX400, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Vysoké teploty procesoru
  • Nesprávné nanesení teplovodivé pasty
  • Loose cooler mounting
  • Insufficient airflow in PC case
  • Dust buildup on heatsink/fan
  • Fan not spinning or spinning too slowly
  • Reapply thermal paste carefully.
  • Ensure cooler is securely mounted.
  • Improve case airflow; check case fan orientation.
  • Clean heatsink and fan.
  • Check fan connection to "CPU_FAN" header; verify fan speed in BIOS/UEFI.
Ventilátor se netočí
  • Kabel ventilátoru odpojen
  • Vadný konektor ventilátoru na základní desce
  • Vadný ventilátor
  • Reconnect fan cable to "CPU_FAN" header.
  • Try connecting the fan to another fan header (if available) to test.
  • Contact customer support for a replacement fan.
Nadměrný hluk ventilátoru
  • Hromadění prachu
  • Problém s ložiskem ventilátoru
  • Otáčky ventilátoru jsou nastaveny příliš vysoko
  • Clean fan and heatsink.
  • Contact customer support if noise persists after cleaning.
  • Adjust fan curve in BIOS/UEFI to lower speeds at idle/low load.

Specifikace

Detailed technical specifications for the PCCOOLER Paladin EX400 CPU Cooler.

FunkceDetail
ModelPaladin EX400
Rozměry (D x Š x V)130mm x 75mm x 157mm (5.12 x 2.95 x 6.1 inch)
Materiál chladičeAluminum fins, Copper heatpipes (Nickel-plated)
Tepelné trubice4 x 6mm sintered heatpipes with Direct Touch (H.D.T 3.0)
TDP (Tepelný návrhový výkon)Až 180W
Rozměry ventilátoru120 mm x 120 mm x 25 mm (4.72 x 4.72 x 0.98 palce)
Rychlost ventilátoru400~1800 RPM (PWM) ±10%
Proudění vzduchu73.6 CFM (MAX)
Úroveň hluku16~28.6 dB(A)
Typ ložiskahydro Bearing
Napájecí konektor4-Pin PWM
svtage12V DC
Kompatibilní patice IntelLGA 1700, LGA 1200, LGA 1150, LGA 1151, LGA 1155, LGA 1156
Kompatibilní patice AMDAM5, AM4
PCCOOLER Paladin EX400 TDP 180W and H.D.T 3.0 technology

Image: Illustration showing the 180W TDP capability and H.D.T 3.0 technology for rapid heat transfer from the CPU.

PCCOOLER Paladin EX400 4 Heat Pipes H.D.T technology

Image: Diagram depicting the 4 heat pipes with H.D.T (Heatpipe Direct Touch) technology, designed for efficient thermal performance.

PCCOOLER Paladin EX400 large thermal surface area

Obrázek: Detail view of the heatsink fins, illustrating the large thermal surface area for enhanced heat dissipation.

Záruka a podpora

The PCCOOLER Paladin EX400 CPU Cooler comes with a 1-letá záruka od data nákupu, která kryje výrobní vady.

For technical support, warranty claims, or further assistance, please visit the official PCCOOLER webnebo kontaktujte jejich oddělení zákaznických služeb. Můžete také navštívit PCCOOLER Store on Amazon pro více informací o produktu a zdroje podpory.

© 2024 PCCOOLER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.