PARTPHONER Venkovní plavba od soumraku do úsvitu Lamp Post Light with GFCI Outlet

1. Úvod

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your PARTPHONER Dusk to Dawn Outdoor Lamp Post Light. This triple-head aluminum street light post features a built-in GFCI outlet and a photocell sensor for automatic operation. Crafted from durable cast aluminum with sturdy 6-sided glass panels, it is designed to withstand various weather conditions.

Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.

2. Bezpečnostní informace

• Elektrická bezpečnost: Installation should be performed by a qualified electrician in accordance with all local electrical codes. Ensure power is turned off at the circuit breaker before any installation or maintenance.
• Základy: Proper grounding is essential to prevent electric shock. Ensure the fixture is correctly grounded.
• Výstup GFCI: The integrated GFCI (Ground Fault Circuit Interrupter) outlet provides added protection against electrical faults. Always press the RESET button after plugging in devices or if the power trips.
• Požadavky na žárovku: Use E26 base bulbs. Do not exceed the maximum wattag100 W na zásuvku.
• Odolnost vůči počasí: Jáamp post is designed for outdoor use and is water-resistant. However, ensure all connections are sealed properly to prevent water intrusion.
• Physical Stability: Jáamp post must be securely mounted to a stable concrete base to prevent tipping.

3. Co je v krabici

Carefully unpack all components and inspect for any damage. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Poštovní základna
• Bottom Column
• Horní sloupec
• Central Column with Sensor
• Zásuvka GFCI
• 3 Lantern Heads
• 3 Lantern Head Finials
• 3 Anchor Bolts
• 3 Bulbs (LED, E26 base)
• Klíč
• Montážní deska
• Drátové konektory
• Montážní materiál (šrouby, podložky, matice)

Obrázek 1: Všechny komponenty obsažené v balení.

For a visual guide on assembly and installation, please refer to the official video below:

Video 1: Official PARTPHONER Assembly and Installation Guide.

4. Montážní návod

1. Attach Lantern Heads to Central Column:
   • Unscrew the preassembled screws to detach the column cap from the central column with the sensor.
   • Guide the electrical wire from each lantern head through the designated holes in the central column.
   • Secure each lantern head to the central column using the provided nuts and washers from the inside. Ensure wires are not pinched.
   • Screw the finial onto each lantern head tightly.
   

   Figure 2: Lantern heads attached to the central column.

2. Connect Outlet to Top Column:
   • Pull the black and white wires from the GFCI outlet through the top column.
   • Screw the GFCI outlet into the bottom of the top column, ensuring a secure fit.
   

   Figure 3: GFCI outlet assembly.
3. Připojit dráty:
   • Connect all white wires (from lanterns, sensor, and outlet) together using a wire nut.
   • Connect all black wires (from lanterns and sensor) together using a wire nut.
   • Connect the red sensor wire to the black outlet wire using a wire nut.
   • Ujistěte se, že všechna připojení jsou bezpečná a v případě potřeby izolována izolační páskou.
4. Connect Bottom Column to Post Base:
   • Unscrew the three preassembled machine screws from the post base.
   • Pull the main supply wires through the bottom column and then through the post base.
   • Secure the bottom column into the post base using the machine screws.
5. Sestavte sloupy:
   • Carefully thread the assembled central column (with lanterns) onto the top column (with GFCI outlet).
   • Thread the assembled top column onto the bottom column. Ensure all wires are tucked safely inside the columns and connections are tight.

5. Pokyny k instalaci

The PARTPHONER lamp post is hardwired and requires a stable foundation. It is recommended to hire a qualified electrician for installation to ensure compliance with local electrical codes and safety standards.

• Prepare Foundation: A concrete base is required for stability. Use the provided mounting plate as a template to mark the positions for the three anchor bolts.
• Embed Anchor Bolts: Install the anchor bolts into fresh concrete or an existing concrete pad, ensuring they are securely set and aligned with the mounting plate.
• Connect House Wiring: Connect the house supply wires (black, white, and ground) to the corresponding wires from the lamp post. Ensure all connections are waterproof and secure.
• Mount Lamp Zveřejnit: Carefully place the assembled lamp post over the anchor bolts. Secure it using the hex nuts and cap nuts provided.

Obrázek 4: Lamp post dimensions and scale.

6. Návod k obsluze

• Senzor od soumraku do úsvitu: Jáamp post is equipped with an advanced photocell sensor. It will automatically turn on at dusk and turn off at dawn, providing hands-free operation and energy savings.
• GFCI Outlet Usage: The integrated GFCI outlet provides two receptacles for convenient outdoor power access. To activate the outlet and lights, press the 'RESET' button on the GFCI. If the power trips, press 'RESET' again. The outlet is designed to protect against power surges, short circuits, and other electrical faults. Maximum load for the GFCI outlet is 1875W.

Figure 5: Dusk to Dawn functionality.

Video 2: Demonstration of PARTPHONER Dusk to Dawn Outdoor Post Light with GFCI Outlet.

7. Údržba

• Čištění: Regularly clean the glass panels and metal surfaces with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, které by mohly poškodit povrchovou úpravu.
• Výměna žárovky: To replace a bulb, ensure power is off at the circuit breaker. Unscrew the old E26 base bulb and screw in a new one. Do not exceed 100W Type A bulbs.
• Ochrana proti počasí: Jáamp post is IP65 water-resistant. Periodically check for any signs of wear or damage to the seals and wiring, especially after severe weather.

Figure 6: Weather-resistant design.

8. Řešení problémů

• Světla se nerozsvítí:
  • Check the circuit breaker to ensure power is supplied to the lamp zveřejnit.
  • Press the 'RESET' button on the GFCI outlet.
  • Ensure the photocell sensor is not obstructed by debris or positioned in an area that receives artificial light at night, which could prevent it from activating.
  • Zkontrolujte, zda jsou žárovky bezpečně zašroubované a zda nejsou spálené.
• GFCI Outlet Not Resetting:
  • Unplug all devices from the GFCI outlet and try pressing 'RESET' again. If it resets, a connected device may be faulty.
  • If the GFCI still does not reset, there might be an internal fault or wiring issue. Consult a qualified electrician.
• Loose Connections/Wobbling Post:
  • Check all threaded connections between column sections and tighten them if loose.
  • Ensure the anchor bolts securing the post base to the concrete are tightened.

9. Specifikace

• Značka: PARTHONER
• Model: PAPO075AB1
• Barva: Birdcage Black
• Materiál: Hliník, Sklo
• Styl: Moderní
• Rozměry produktu: 21.5"L x 21.5"W x 84.2"H (7ft)
• Zdroj napájení: Elektrický kabel
• Typ instalace: Hardwired (Professional installation recommended)
• Speciální vlastnosti: Dusk to Dawn Sensor, GFCI Outlet
• Typ zdroje světla: LED (patice E26)
• svtage: 120 voltů
• Wattage: Max 1875 watts (for GFCI outlet)
• Jas: 2000 lumenů
• Úroveň odolnosti proti vodě: Vodě odolný
• Požadovaná montáž: Ano

10. Záruka a podpora

For warranty information, technical support, or any questions regarding your PARTPHONER lamp post, please contact customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can typically find support contact information on the product packaging or the retailer's webmísto, kde byl produkt zakoupen.