celexon UST High-Contrast Floor-Rising Screen - HomeCinema Plus, 120"

1. Úvod

This manual provides comprehensive instructions for the setup, operation, and maintenance of your celexon UST High-Contrast Floor-Rising Screen, HomeCinema Plus, 120". This advanced projection screen is designed to deliver exceptional image quality, especially with Ultra Short Throw (UST) projectors, by enhancing contrast and reducing ambient light interference. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Figure 1.1: The celexon UST High-Contrast Floor-Rising Screen, HomeCinema Plus, 120", shown fully extended with its remote control.

2. Bezpečnostní informace

Always adhere to the following safety precautions to prevent damage to the product or personal injury:

• Ensure the screen is placed on a stable, level surface to prevent tipping.
• Do not obstruct the screen's movement path during extension or retraction. Keep hands and objects clear.
• Chraňte obrazovku před přímým slunečním zářením, zdroji tepla a vlhkostí.
• Používejte pouze dodaný napájecí kabel a příslušenství.
• Do not attempt to disassemble or repair the screen yourself. Refer to qualified service personnel.
• Unplug the screen from the power outlet before cleaning or if it will not be used for an extended period.

3. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• celexon UST High-Contrast Floor-Rising Screen Unit
• Napájecí kabel
• Infračervené (IR) dálkové ovládání
• Rádiové frekvenční (RF) dálkové ovládání
• Remote Control Wall Mount Bracket
• Trigger Cable (3.5mm jack)
• Mounting Brackets (L-shaped and flat plates)
• Šrouby a nástěnné kotvy
• Allen Key
• Čisticí kartáč

Obrázek 3.1: Přesview všech komponentů obsažených v balení.

4. Nastavení

4.1 Umístění

Position the screen unit on a flat, stable surface directly in front of your Ultra Short Throw (UST) projector. Ensure there is sufficient clear space above the unit for the screen to fully extend without obstruction. The screen's base dimensions are approximately 289.3 cm (113.9 inches) in length, 15.2 cm (5.98 inches) in width, and 10.9 cm (4.29 inches) in height.

Figure 4.1: Detailed dimensions of the screen's base unit.

4.2 Připojení napájení

Locate the power input port on the side of the screen unit. Connect the provided power cable to the unit and then plug it into a standard electrical outlet (AC 220V). The unit features a power indicator light.

Figure 4.2: Power input (AC 220V) and trigger (TRIG) ports on the screen unit.

4.3 Optional: Securing the Unit

For added stability, especially in high-traffic areas, the included mounting brackets can be used to secure the screen base to the floor or a sturdy piece of furniture. Use the provided screws and anchors as appropriate for your mounting surface. Consult a professional if unsure about installation.

5. Ovládání obrazovky

5.1 Používání dálkových ovladačů

Your celexon screen comes with two remote controls: an Infrared (IR) remote and a Radio Frequency (RF) remote. The RF remote offers greater range and does not require direct line-of-sight to the screen's IR receiver.

• Extend Screen: Stiskněte tlačítko UP arrow button to raise the screen.
• Retract Screen: Stiskněte tlačítko DOLŮ arrow button to lower the screen.
• Stop Screen: Stiskněte tlačítko ZASTÁVKA button to halt the screen at any desired position.

5.2 Using the Trigger Input

The screen unit features a 3.5mm trigger input (labeled "TRIG" in Figure 4.2). This allows the screen to automatically extend or retract in sync with your projector's power state, provided your projector has a compatible 12V trigger output. Connect the provided trigger cable from your projector's 12V trigger output to the screen's TRIG input.

Figure 5.1: The screen in use with a projector, demonstrating its integration into a home cinema setup.

6. Údržba

6.1 Cleaning the Screen Surface

The high-contrast screen surface is delicate. Use the provided soft cleaning brush or a clean, lint-free microfiber cloth to gently remove dust. For stubborn marks, lightly damphadřík navlhčete destilovanou vodou. Do not use harsh chemicals, abrasive cleaners, or excessive pressure, as this can damage the optical coating.

6.2 Čištění Casing

Otřete obrazovku casing with a soft, dry cloth. If necessary, a slightly damp cloth can be used, followed by immediate drying. Ensure no liquid enters the internal mechanisms.

6.3 Skladování

Pokud obrazovku nepoužíváte, zcela ji zasuňte do jejího úložného prostoru.asing to protect the surface from dust and damage. If storing for an extended period, unplug the unit and store it in a dry, cool place.

7. Řešení problémů

8. Specifikace

Obrázek 8.1: Viewable screen area dimensions.

9. Záruka a podpora

9.1 Informace o záruce

Your celexon UST High-Contrast Floor-Rising Screen is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or visit the official celexon webPodrobné záruční podmínky platné pro váš region naleznete na webových stránkách.

9.2 Zákaznická podpora

Should you encounter any issues or have questions not covered in this manual, please contact celexon customer support. Contact details can typically be found on the celexon website or on the product packaging. When contacting support, please have your product model (HomeCinema Plus, 120") and manufacturer reference number (1000025599) ready.