1. Konec produktuview
This U.S. Solid 1-inch G-threaded motorized ball valve, constructed from SS304 stainless steel, is designed for reliable fluid control in various applications. It operates on 9-24V AC/DC power, opening or closing in 3-5 seconds, and features an automatic power cut-off to prevent overheating. The valve is lead-free, suitable for potable water, and boasts an IP65 rated housing for dust and water jet protection. It includes a manual override function and a position indicator for convenience. This valve is ideal for domestic water systems, home automation, brewing, and Arduino projects.
Obrázek 1: Přední strana view of the U.S. Solid 1-inch Motorized Ball Valve.
2. Bezpečnostní informace
- Před instalací, údržbou nebo řešením problémů vždy odpojte napájení.
- Zajistěte provozní objtage (9-24V AC/DC) matches your power supply.
- Do not exceed the maximum pressure rating of 1.0 MPa.
- Install the valve in an environment within the specified ambient temperature range (-10 °C to 40 °C).
- Zajistěte správné uzemnění, abyste předešli nebezpečí úrazu elektrickým proudem.
- Consult a qualified professional for installation if you are unsure.
3. Obsah balení
Při vybalení ověřte, zda jsou všechny položky přítomny:
- U.S. Solid Motorized Ball Valve (USS-MSV102F6C)
- Uživatelská příručka (tento dokument)
4. Technické specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | USS-MSV102F6C |
| Valve Material | SS304 Stainless Steel |
| Kuličkové sedlo | PTFE |
| Materiál těsnění | EPDM |
| Čas otevření/zavření | 3-5 sekund |
| Provozní svtage | 9-24V AC / DC |
| Maximální spotřeba energie | 2 W |
| Maximální točivý moment | 2 N·m |
| Maximální tlak | 1.0 MPa (1000 kPa) |
| Střední teplotní rozsah | 0 °C až 90 °C |
| Rozsah okolní teploty | -10 °C až 40 °C |
| Hodnocení IP | IP65 |
| Životní cyklus | 80,000 to 100,000 cycles |
| Typ vrtání | Plný přístav |
| Typ závitu | BSPP (G) - British Standard Parallel Pipe |
| Rozměry produktu (D x Š x V) | 8.99 x 10.21 x 11.1 cm |
| GTIN/UPC | 888107104278 |
Obrázek 2: Štítek produktu s klíčovými specifikacemi.
Figure 3: Technical drawing with dimensions for various valve sizes.
5. Instalace
5.1. Montáž ventilu
- Ensure the pipeline is clean and free of debris before installation.
- Na závity ventilu naneste vhodný těsnicí prostředek na závity.
- Thread the valve into the pipeline, ensuring a tight, leak-free connection. Do not overtighten.
- Orient the valve so the actuator is easily accessible for wiring and manual override.
Figure 4: Close-up of the valve's threaded connection.
5.2. Elektrické připojení
The valve operates on 9-24V AC/DC. This model features a 3-wire positive break configuration. Refer to the wiring diagram provided with your specific product or consult the manufacturer's website for detailed instructions if the included diagram is unclear.
- Červený drát: Connect to positive (+) power supply.
- Černý drát: Connect to negative (-) power supply.
- Žlutý drát: Control wire for valve position.
Typically, applying voltage between Red and Black wires powers the actuator. The Yellow wire, when energized, controls the valve's open/close state. Ensure all connections are secure and insulated.
6. Provoz
6.1. Automatický provoz
Once properly installed and wired, the valve will open or close automatically when power is applied to the control circuit. The valve will consume power only during the opening or closing cycle (3-5 seconds) and then automatically cut off power, preventing overheating.
- Chcete-li otevřít: Apply power to the designated control wire (e.g., Yellow wire). The valve will rotate to the open position.
- Zavřít: Reverse the polarity or switch the control signal as per your wiring configuration. The valve will rotate to the closed position.
The position indicator on top of the actuator provides a visual confirmation of the valve's current open or closed state.
6.2. Manual Override Function
This valve is equipped with a manual override function, allowing you to operate it manually in case of power failure or if the valve becomes stuck.
- Locate the manual override knob on the actuator (refer to Figure 5).
- Turn the knob clockwise or counter-clockwise to manually open or close the valve.
- Ensure the valve is fully open or closed as required.
Figure 5: Manual override knob on the actuator.
7. Údržba
The U.S. Solid motorized ball valve is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Pravidelná prohlídka: Regularly inspect the valve and connections for any signs of leaks, corrosion, or damage.
- Čištění: Keep the exterior of the actuator clean and free from excessive dust or moisture. The IP65 rating protects against dust and water jets, but extreme conditions should be avoided.
- Kontrola funkčnosti: Periodically test the automatic and manual operation of the valve to ensure it opens and closes smoothly.
- Vyhněte se agresivním chemikáliím: Do not use abrasive cleaners or harsh chemicals on the valve body or actuator, as this may damage the materials or seals.
8. Řešení problémů
If you encounter issues with your motorized ball valve, refer to the table below for common problems and solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Valve does not open/close automatically. | No power, incorrect wiring, power supply outside 9-24V AC/DC range, motor fault. | Check power supply. Verify wiring connections against the diagram. Ensure voltage is within range. If issues persist, contact support. |
| Valve is stuck or operates slowly. | Debris in the valve, low power, mechanical obstruction. | Use the manual override to check for mechanical issues. Flush the system if debris is suspected. Verify power supply. |
| Únik z přípojek. | Improperly tightened connections, damaged threads, insufficient thread sealant. | Disconnect power, drain system. Re-tighten connections with proper thread sealant. Inspect threads for damage. |
| Actuator makes noise but valve doesn't move. | Motor gear issue, valve seized. | Attempt manual override. If the valve moves manually, the motor may be faulty. If it doesn't move manually, the valve itself may be seized. Contact support. |
Poznámka: Uživatelská zprávaview mentioned that the provided wiring schematic might be generic and not specific to the manual function model. If you encounter wiring difficulties, search for the specific wiring diagram for the USS-MSV102F6C model with 3-wire positive break and manual function.
9. Informace o záruce
U.S. Solid products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official U.S. Solid webUschovejte si účtenku jako doklad o koupi pro případné reklamace.
10. Zákaznická podpora
For technical assistance, troubleshooting beyond this manual, or inquiries about your U.S. Solid motorized ball valve, please contact U.S. Solid customer support through their official website or the contact information provided with your purchase. When contacting support, please have your model number (USS-MSV102F6C) and purchase details ready.