1. Konec produktuview
The KETOTEK KT3100 is a versatile digital thermostat designed for precise temperature control in various applications. It features both heating and cooling functions, along with advanced timing modes, making it suitable for household use, heating/cooling equipment, incubators, greenhouses, and terrariums.
Klíčové vlastnosti:
- Rozsah regulace teploty: -40 °C až 120 °C.
- Příkon: 100-250V, 50/60Hz.
- Maximální zatížení: 16A, 3680W.
- Funkce časování: F01 Cycle Timer, F02 Countdown ON, F03 Countdown OFF, F04 Countdown ON/OFF (0-99 hours, 59 minutes).
- Kalibrace teploty: -9.9°C to 9.9°C adjustment.
- Funkce paměti: Zachová nastavení i po výpadku napájení.
- Resetovací funkce: Allows restoration of factory settings.
- Senzor: NTC10K/B3950 temperature probe with a 3-meter cable.
Image 1.1: The KT3100 thermostat displaying its main features including heating/cooling, timing, calibration, memory, and reset functions.
2. Bezpečnostní informace
Please read all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Zajistěte napájení objtage matches the device's specifications (100-250V).
- Nepřekračujte maximální zatížitelnost 16 A / 3680 W.
- Keep the device and sensor away from water or excessive moisture.
- Nerozebírejte ani neupravujte zařízení. Veškerý servis svěřte kvalifikovanému personálu.
- Zajistěte řádné větrání kolem zařízení.
- Před čištěním nebo pokud zařízení delší dobu nepoužíváte, odpojte jej ze zásuvky.
3. Komponenty produktu
The KETOTEK KT3100 package includes the following items:
- 1 x KETOTEK KT3100 Digital Thermostat
- 1 x 3-meter NTC10K/B3950 Temperature Sensor
- 1 x Uživatelská příručka (tento dokument)
Image 3.1: The KETOTEK KT3100 Digital Thermostat with its included 3-meter temperature sensor.
4. Rozvržení a zobrazení zařízení
Familiarize yourself with the thermostat's buttons and display indicators for effective operation.
Obrázek 4.1: Přední strana view of the KT3100 thermostat with labeled components.
- Tlačítko MODE: Used to switch between temperature control and timing modes, and to confirm settings.
- Tlačítko SET: Used to enter setting mode for parameters.
- Tlačítko NAHORU: Zvyšuje hodnoty nebo naviguje nahoru.
- Tlačítko DOLŮ: Snižuje hodnoty nebo se pohybuje dolů.
- Resetovací tlačítko: Small button for factory reset (requires a pin).
- Naměřená teplota: Zobrazuje aktuální teplotu naměřenou senzorem.
- Spouštěcí teplota (ZAP): The temperature at which the connected device turns ON.
- Teplota zastavení (VYP): The temperature at which the connected device turns OFF.
- Indikátor vytápění/chlazení: Icon indicating active heating or cooling mode.
- Ukazatel výstupní práce: Light indicating when the output socket is active.
Obrázek 4.2: Detailní view of the digital display showing temperature readings and set points.
5. Technické specifikace
| Specifikace | Hodnota |
|---|---|
| Značka | KETOTEK |
| Číslo modelu | KT3100 |
| Vstupní objemtage | 100-250V |
| Frekvence | 50/60 Hz |
| Max. Proud | 16A |
| Maximální výkon | 3680W |
| Rozsah regulace teploty | -40 °C ~ 120 °C |
| Snímač teploty | NTC10K/B3950, 3m cable |
| Typ zobrazení | LCD |
| Kontrolní metoda | Dotyková tlačítka |
| Speciální funkce | Timing Function, Temperature Calibration, Memory, Reset |
Image 5.1: Physical dimensions of the KT3100 thermostat and its temperature sensor.
6. Nastavení
- Rozbalit: Carefully remove the KT3100 thermostat and its temperature sensor from the packaging.
- Připojení senzoru: Plug the 3-meter temperature sensor into the designated port on the side of the thermostat.
- Snímač polohy: Place the sensor in the area where you wish to measure and control the temperature. Ensure it is not directly exposed to heat sources or drafts that could affect readings.
- Zásuvný termostat: Insert the KT3100 thermostat into a standard 230V wall outlet. The LCD display will illuminate, showing the current measured temperature.
- Připojit spotřebič: Plug the appliance you wish to control (e.g., heater, fan, refrigerator) into the socket on the front of the KT3100 thermostat.
7. Návod k obsluze
7.1. Režim regulace teploty
This mode allows you to set a desired temperature range for heating or cooling.
- Zapnutí: Plug in the thermostat. The display will show the current measured temperature.
- Nastavení počáteční teploty (ZAP): Press the 'MODE' button once. The 'Start Temperature' (ON) value will flash. Use the 'UP' and 'DOWN' buttons to adjust the desired temperature at which your appliance should turn ON.
- Nastavená teplota zastavení (VYP): Press the 'MODE' button again. The 'Stop Temperature' (OFF) value will flash. Use the 'UP' and 'DOWN' buttons to adjust the desired temperature at which your appliance should turn OFF.
- Potvrdit nastavení: Press the 'MODE' button a third time to exit the setting mode and save your changes. The thermostat will now operate according to your set temperatures.
- Heating/Cooling Selection: The thermostat automatically detects whether to operate in heating or cooling mode based on the relationship between the Start and Stop temperatures. If Start Temp < Stop Temp, it's heating mode. If Start Temp > Stop Temp, it's cooling mode.
7.2. Timing Functions (F01-F04)
The KT3100 offers four timing modes for advanced control. To access these modes, press and hold the 'SET' button for approximately 3 seconds until 'F01' appears.
- F01: Cycle Timer Mode
This mode allows the device to cycle ON and OFF for set durations. Press 'SET' to enter F01 settings. Use 'UP'/'DOWN' to set ON hours/minutes, then 'SET' to move to OFF hours/minutes, then 'SET' to confirm. Press 'MODE' to exit.
Image 7.1: Display showing F01 Cycle Timer settings.
- F02: Countdown ON Mode
The device will remain OFF for a set countdown period, then turn ON and stay ON. Press 'UP'/'DOWN' to select F02, then 'SET' to enter settings. Set countdown hours/minutes. Press 'SET' to confirm. Press 'MODE' to exit.
Image 7.2: Display showing F02 Countdown ON settings.
- F03: Countdown OFF Mode
The device will remain ON for a set countdown period, then turn OFF and stay OFF. Press 'UP'/'DOWN' to select F03, then 'SET' to enter settings. Set countdown hours/minutes. Press 'SET' to confirm. Press 'MODE' to exit.
Image 7.3: Display showing F03 Countdown OFF settings.
- F04: Countdown ON/OFF Mode
The device will turn ON for a set period, then OFF for another set period, and then repeat. Press 'UP'/'DOWN' to select F04, then 'SET' to enter settings. Set ON hours/minutes, then 'SET' to move to OFF hours/minutes, then 'SET' to confirm. Press 'MODE' to exit.
Image 7.4: Display showing F04 Countdown ON/OFF settings.
7.3. Kalibrace teploty
If you notice a discrepancy between the thermostat's reading and a known accurate thermometer, you can calibrate the sensor. Press and hold 'SET' for 3 seconds, then use 'UP'/'DOWN' to navigate to the calibration setting (usually indicated by 'CAL' or a similar symbol). Adjust the value between -9.9°C and 9.9°C to match the reference thermometer. Press 'SET' to confirm, then 'MODE' to exit.
7.4. Paměťová funkce
The KT3100 automatically saves your settings. In case of a power outage, the device will retain its last programmed settings once power is restored.
7.5. Funkce Reset
To restore the thermostat to its factory default settings, locate the small reset button (usually a pinhole) on the device. Use a thin object (like a paperclip) to press and hold the reset button for a few seconds until the display indicates a reset has occurred.
8. Aplikace
The KETOTEK KT3100 Digital Thermostat is suitable for a wide range of temperature control applications:
- Vytápění/chlazení domácnosti: Control electric heaters, fans, or portable air conditioners.
- Chlazení: Maintain specific temperatures for refrigerators or freezers.
- Inkubátory: Ensure stable temperatures for hatching eggs.
- skleníky: Regulate temperature for optimal plant growth.
- Terária pro plazy: Create a stable environment for reptiles and amphibians.
- Aquaculture: Control water temperature in aquariums or fish tanks.
Obrázek 8.1: Příkladamples of common applications for the KT3100 thermostat.
9. Údržba
Proper maintenance ensures the longevity and accuracy of your KT3100 thermostat.
- Čištění: Zařízení otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani zařízení neponořujte do vody.
- Péče o senzor: Keep the temperature sensor clean and free from debris. Avoid bending or damaging the sensor cable.
- Skladování: When not in use, store the thermostat in a cool, dry place away from direct sunlight and extreme temperatures.
10. Řešení problémů
Pokud se s termostatem KT3100 setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný | No power; Device malfunction | Check power outlet; Ensure thermostat is properly plugged in; Try a different outlet. If still blank, contact support. |
| Nesprávný údaj o teplotě | Sensor dirty or damaged; Calibration needed; Sensor placed incorrectly | Clean sensor; Perform temperature calibration (Section 7.3); Reposition sensor away from direct heat/cold sources. |
| Appliance not turning ON/OFF | Incorrect temperature settings; Timing mode active; Appliance not plugged in or faulty | Verify Start/Stop temperature settings (Section 7.1); Check if a timing mode (F01-F04) is active (Section 7.2); Ensure appliance is functional and correctly plugged into the thermostat. |
| Tlačítka nereagují | Dočasná softwarová závada | Unplug and replug the thermostat; Perform a factory reset (Section 7.5). |
11. Záruka a podpora
KETOTEK products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official KETOTEK webwebu. Uschovejte si prosím doklad o koupi pro ověření záruky.