Zavedení
This manual provides essential information for the safe and efficient operation of your Voxelab Aquila S3 3D Printer. Please read it thoroughly before assembly and use to ensure optimal performance and longevity of your device.
Image: The Voxelab Aquila S3 3D Printer, showcasing its design and a samp3D tisk.
Klíčové vlastnosti
The Voxelab Aquila S3 3D Printer incorporates several advanced features designed to enhance your 3D printing experience:
- 25-Point Automatic Leveling: Simplifies bed leveling with a single-button operation, significantly reducing manual adjustment time.
- All-Metal High-Temperature Extruder: Features a reduction ratio design for up to 70N wire feeding force, minimizing clogging risks. Supports nozzle temperatures up to 300℃.
- High-Efficiency Printing: Includes simultaneous preheating of the nozzle and build platform. Achieves typical print speeds of 100mm/s, with a maximum of 200mm/s.
- Široká kompatibilita materiálů: Supports various filaments including PLA, ABS, PLA-CF, PETG, PETG-CF, PET-CF, PA12-CF, PA, PC, and TPU.
- Provoz s nízkou hlučností: Designed with mute nozzle and motherboard fans, operating at less than 50dB.
- Removable PEI Magnetic Steel Platform: Provides excellent adhesion and easy removal of printed models.
Obrázek: Overview of the Voxelab Aquila S3's key features, including all-metal body, high precision printing, PEI plate, resume printing, fast heating, direct extruder, max printing speed, color screen, and 25-point auto leveling.
Pokyny pro nastavení
Careful assembly is crucial for optimal printer performance. Follow these general steps for setting up your Aquila S3:
- Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda jsou všechny součásti uvedené v dodacím listu přítomny a nepoškozené.
- Sestava základny: Secure the gantry to the printer base using the provided screws. Ensure all connections are firm.
- Extruder and Hotend Installation: Mount the extruder assembly onto the X-axis carriage. Connect the necessary cables for the hotend, fans, and stepper motor.
- Držák vlákna: Attach the filament spool holder to the designated location on the printer frame.
- Zapojení: Connect all electrical cables according to the wiring diagram provided in the quick start guide. Pay close attention to power supply connections and motor cables.
- Zapnutí: Connect the power cable and turn on the printer. The display screen should illuminate.
- Initial Bed Leveling (25-Point Auto Leveling):
- Navigate to the "Leveling" menu on the printer's display.
- Select the "Auto Level" option. The printer will automatically probe 25 points on the build plate to create a mesh for accurate printing.
- After auto-leveling, perform a Z-offset adjustment if necessary, using a piece of paper to set the correct nozzle height above the build plate.
Image: Visual representation of the 25-point automatic bed leveling system, highlighting its precision.
Návod k obsluze
Načítání vlákna
- Umístěte cívku s filamentem na držák filamentu.
- Předehřejte trysku na doporučenou teplotu pro váš typ filamentu (např. 200–220 °C pro PLA).
- Insert the filament into the extruder's intake hole and push it gently until it engages with the extruder gears.
- Use the "Load Filament" function on the printer's display to automatically feed the filament through the hotend until it extrudes smoothly from the nozzle.
Preparing a Print (Slicing)
Before printing, 3D models (STL, OBJ, AMF files) must be converted into G-code using slicing software. Compatible software includes Cura, Simplify3D, and Voxelmaker.
- Importujte svůj 3D model do softwaru pro řezání.
- Configure print settings such as layer height (0.1-0.4mm), infill density, print speed (typical 100mm/s, max 200mm/s), nozzle temperature (up to 300°C), and bed temperature (up to 100°C).
- Generate supports if your model requires them.
- Rozdělení modelu pro generování G-kódu file.
- Uložte G-kód file to a memory card.
Spuštění tisku
- Insert the memory card containing the G-code file into the printer's card slot.
- On the printer's display, navigate to the "Print" menu.
- Vyberte si svůj G-kód file ze seznamu.
- Confirm the print job. The printer will begin preheating the nozzle and bed simultaneously, then start printing.
Obrázek: Podrobný view of the all-metal high-temperature extruder, showing its internal components and maximum temperature capability of 300°C.
Image: A display of various 3D printed objects, demonstrating the printer's compatibility with multiple filament types like PLA, ABS, PETG, PA, PC, and TPU.
Údržba
Pravidelná údržba zajišťuje konzistentní kvalitu tisku a prodlužuje životnost vaší tiskárny.
- Vyčistěte konstrukční desku: After each print, allow the build plate to cool and carefully remove the printed object. Clean the PEI surface with isopropyl alcohol to maintain adhesion.
- Čištění trysek: Periodically check the nozzle for clogs or debris. Use a thin needle or cleaning filament to clear any blockages.
- Extruder Maintenance: Inspect the extruder gears for filament residue. Clean them with a brush if necessary to ensure proper filament feeding.
- Mazání: Apply a small amount of lithium grease to the Z-axis lead screw and smooth rods every few months to ensure smooth movement.
- Aktualizace firmwaru: Check the Voxelab official webwebu, kde najdete veškeré dostupné aktualizace firmwaru pro zlepšení výkonu a přidání nových funkcí.
Odstraňování problémů
Zde jsou řešení běžných problémů, se kterými se můžete setkat:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Vlákno se nevytlačuje | Ucpaná tryska, zamotaný filament, nesprávná teplota. | Clean the nozzle, check filament path, verify nozzle temperature settings. |
| Špatná přilnavost k loži | Unleveled bed, dirty build plate, incorrect bed temperature, too large Z-offset. | Perform auto-leveling, clean the PEI plate with isopropyl alcohol, adjust bed temperature (e.g., 55°C for PLA), fine-tune Z-offset. |
| Prints detaching mid-print | Similar to poor bed adhesion, drafts, excessive print speed. | Ensure proper bed adhesion, avoid drafts, reduce print speed for the first few layers. |
| Posouvání vrstev | Loose belts, motor issues, excessive print speed. | Check and tighten X and Y axis belts, inspect motor connections, reduce print speed. |
| Nadměrný hluk | Loose components, worn bearings, fan issues. | Inspect for loose screws, lubricate moving parts, check fan operation. (Note: Printer is designed for <50dB operation). |
Image: A graphic demonstrating the low noise level of the printer, indicating it operates below 50dB.
Technické specifikace
| Funkce | Detail |
|---|---|
| Značka | Voxelab |
| Číslo modelu | Aquila S3 |
| Rozměry produktu | 46.99 x 46.99 x 47.98 cm (18.5 x 18.5 x 18.9 palce) |
| Hmotnost položky | 9.36 kg (20.6 lb) |
| Objem tisku | 220 x 220 x 240 mm |
| Materiál | Legovaná ocel |
| Barva | Černý |
| Množství trysky | 1 |
| Průměr trysky | 0.4 mm (includes 0.3/0.4/0.6/0.8mm copper nozzles in package) |
| XY Axis Precision | ±0.2 mm |
| Tloušťka vrstvy | 0.1-0.4 mm |
| Maximální teplota trysky | 300 °C |
| Maximální teplota pařeniště | 100 °C |
| Rychlost tisku | Typical 80-100 mm/s, Max 200 mm/s |
| Kompatibilní vlákna | PLA, ABS, PLA-CF, PETG, PETG-CF, PET-CF, PA12-CF, PA, PC, TPU (1.75mm diameter) |
| Kompatibilní software pro krájení | Cura, Simplify3D, Voxelmaker |
| File Formát | STL, OBJ, AMF |
| Konektivita | USB, Memory card (offline printing) |
| Obnovit funkci tisku | Ano |
| Vstupní objemtage | AC 115/230V 50/60Hz |
| Výstupní objemtage | DC 24V |
| Celkový výkon | 350W |
| Kompatibilní OS | Windows 7/10, Mac OS |
Image: A detailed table outlining the technical specifications and parameters of the Aquila S3 printer.
Záruka a podpora
Voxelab FDM 3D printers come with a one-year warranty and lifetime technical support.
- Záruční doba: Jeden rok od data nákupu.
- Technická podpora: Lifetime technical assistance is available for any operational or technical queries.
- Kontakt: For support inquiries, please contact the Voxelab after-sales team. Responses are typically provided within 24 hours.
- Vrácení: For information regarding returns within 30 days of receipt due to a change of mind, or for defective/damaged products, please refer to the Amazon return policy pages. Specific information for Marketplace purchases is also available on Amazon's help pages.