WLtoys K110S 6CH 3D/6G System Flybarless RC Helicopter User Manual

1. Bezpečnostní informace

Before operating the WLtoys K110S RC Helicopter, please read and understand all safety instructions. Failure to follow these instructions may result in injury or damage to the product.

• Always operate the helicopter in a spacious, wind-free, and obstacle-free outdoor area. Maintain a safe distance from the aircraft.
• Keep hands, face, and loose clothing away from rotating blades.
• Před každým letem se ujistěte, že je baterie plně nabitá.
• Do not fly with broken or damaged rotor blades.
• Doporučený věk pro provoz je 14 let a více.
• In case of emergency, immediately use the emergency stop function on the remote control.

2. Nastavení

2.1. Obsah balení

The WLtoys K110S package typically includes:

• WLtoys K110S RC Helicopter
• 2.4G 6-channel Remote Control
• 3.7V 450mAh 25C Li-Po Battery
• Dedicated USB Charger (charges 2 batteries simultaneously)
• Náhradní hlavní čepele
• Náhradní ocasní rotor
• Tools (e.g., screwdriver)
• Návod k použití

Image: Package contents of the WLtoys K110S helicopter, showing the helicopter, remote control, charger, and various accessories.

2.2. Nabíjení baterie

Ensure the helicopter's 3.7V 450mAh 25C Li-Po battery is fully charged before use. Use the dedicated USB charger provided. The charger can charge two batteries simultaneously.

• Connect the USB charger to a compatible USB power source (e.g., phone adapter, computer USB port).
• Connect the battery to the charger. The indicator light will show charging status.
• Charging time is approximately 50-60 minutes for a single battery.

Image: Illustration of various battery charging methods, including using a cell phone power adapter, computer USB port, or mobile phone charger.

2.3. Příprava dálkového ovladače

Dálkový ovladač vyžaduje 6 baterie typu AA (nejsou součástí balení).

• Install 6 AA batteries into the remote control, ensuring correct polarity.
• Push the throttle stick to its lowest position.
• Set all switches on the remote control to the upper position.

2.4. Connecting and Calibrating

After preparing the remote control and charging the battery:

1. Connect the fully charged battery to the helicopter. Ensure battery wires do not interfere with landing gear or internal gears.
2. Umístěte vrtulník na rovný a vodorovný povrch.
3. Turn on the remote control. The remote will automatically pair with the helicopter.
4. To calibrate, pull both control sticks to their outermost sides. The helicopter blades will twitch up and down, indicating successful calibration.

3. Návod k obsluze

3.1. Flight Modes (3D/6G System)

The WLtoys K110S features both 3D and 6G flight modes, switchable via the remote control.

• Režim 6G: Utilizes a 6-axis gyroscope for stable flight, ideal for beginners. It offers enhanced stability and wind resistance.
• 3D režim: Employs a 3-axis gyroscope, providing responsive control for aerobatics such as rolls, inverted flight, and other advanced maneuvers. Recommended for experienced pilots.

Doporučení: Beginners should start practicing in 6G mode and switch to 3D mode only after mastering all basic functions.

Image: The WLtoys K110S helicopter flying outdoors, illustrating the stability of 6G mode for beginners.

Image: The WLtoys K110S helicopter performing advanced maneuvers, highlighting the responsive control of 3D mode.

3.2. Vzlet a přistání

For takeoff, gently push the throttle stick upwards to lift the helicopter. For beginners, it is advisable to fly at a low altitude initially.

After takeoff, gently control the throttle stick to adjust the helicopter's altitude. Use the right stick to adjust forward/backward and left/right attitude, ensuring the tail remains stable and hovers facing towards you.

To land, slowly pull the throttle stick downwards until the helicopter gently touches down.

3.3. Hovering Point Adjustment

The remote control allows for setting the aircraft's hovering point. Enter the setting mode to adjust the hover point according to your preference for stable flight.

Image: The WLtoys K110S helicopter maintaining a stable hover, with the remote control showing the "Spot Hover" feature.

4. Údržba

• Regularly inspect the helicopter for any signs of damage to the blades, frame, or electronic components.
• Replace any damaged parts immediately using genuine WLtoys spare parts.
• Udržujte vrtulník čistý a bez prachu a nečistot.
• Vrtulník a dálkové ovládání skladujte na chladném a suchém místě mimo dosah přímého slunečního záření.
• Ensure batteries are stored at a partial charge (around 3.8V per cell for Li-Po) if not used for extended periods.

5. Řešení problémů

6. Specifikace

• Model: K110S
• Značka: WLtoys
• kanály: 6CH
• Flight System: 3D/6G (Brushless, Flybarless)
• Hlavní motor: 1106 Bezkomutátorový motor
• Ocasní motor: 0716 Coreless Motor
• Baterie: 3.7V 450mAh 25C Li-Po
• Doba letu: Přibližně 6-7 minut
• Doba nabíjení: Přibližně 50-60 minut
• Dálkové ovládání: 2.4 GHz (kompatibilní s FUTABA S-FHSS)
• Vzdálenost dálkového ovládání: Přibližně 120m
• Rozměry produktu: 9.65 x 1.89 x 3.03 palce
• Hmotnost položky: 2.12 unce
• Doporučený věk: 14 let a více

Image: Detailed product information and dimensions for the WLtoys K110S helicopter.

Obrázek: Detail view of the WLtoys K110S helicopter, highlighting the 1106 brushless main motor and 0716 coreless tail motor.

7. Záruka a podpora

For warranty information, technical support, or to purchase spare parts, please contact the seller or the official WLtoys customer service. Refer to your purchase documentation for specific warranty terms and contact details.