Uživatelská příručka k elektrickému stolu FLEXISPOT EN1

1. Úvod

Welcome to the user manual for your FLEXISPOT EN1 Electric Stand Up Desk. This document provides essential information for the safe and efficient use of your new adjustable desk. Please read all instructions carefully before assembly and operation.

Bezpečnostní upozornění

• Nepřekračujte maximální hmotnostní limit 176 lb (80 kg).
• Keep fingers and other body parts clear of moving parts during operation to prevent injury.
• Ensure all cables are properly managed and secured to avoid entanglement or damage during height adjustments.
• Follow all assembly instructions carefully and use tools safely.
• Tento výrobek je určen pro dospělé.

2. Zahrnuté komponenty

Before beginning assembly, verify that all parts listed below are present in your package. Refer to the installation video for visual identification of components.

• One-Piece Desktop (55 x 28 inches, Rustic Top)
• Desk Frame (Black)
• Lifting Columns (2 units)
• Nohy stolu (2 kusy)
• Nosník
• Supporting Plates (2 units)
• Motor with Keypad (4-memory presets)
• Převodová tyč
• Spojka
• Zástrčka
• Hooks (for headphones/accessories)
• Assembly Tools (Allen wrench, spanner)
• Návod k použití

Poznámka: The desktop and desk frame may ship and arrive separately.

Image: Packaging showing separate boxes for desktop and frame.

3. Montážní návod

Follow these steps to assemble your FLEXISPOT EN1 desk. A detailed installation video is provided below for visual guidance.

Instalační video průvodce

Video: FLEXISPOT Standing Desk Frame Installation Guide. This video demonstrates the step-by-step assembly process for the desk frame and motor components.

Sestavení krok za krokem

1. Insert Coupling into Motor: Carefully insert the coupling into the motor. Ensure it is oriented correctly as shown in the installation video (0:09 mark).
2. Insert Motor and Right Column: Připevněte sestavu motoru k pravému zvedacímu sloupku. Zajistěte ji pomocí dodaných šroubů a imbusového klíče (značka 0:16).
3. Install Crossbeam: Align the three protrusions on the lifting column with the holes in the crossbeam and secure it with screws (0:25 mark).
4. Install Support Plates: Attach the two support plates to the top of the lifting columns using the provided screws (0:35 mark).
5. Instalace nohou stolu: Secure the desk feet to the bottom of the lifting columns using the provided screws (0:40 mark).
6. Adjust Crossbeam: Loosen the screws on the crossbeam, adjust the width to fit your desktop, and then tighten the screws securely (0:47 mark).
7. Instalace stolní desky: Place the desktop upside down on a soft, clean surface. Carefully position the assembled frame onto the desktop. Use a drill (prepared by customer) and the provided screws to attach the desktop to the frame (0:59 mark).
8. Install Transmission Rod: Insert the transmission rod into the motor and the left lifting column, ensuring it connects properly (1:07 mark).
9. Tighten Transmission Rod Nut: Use the spanner to tighten the nut on the transmission rod (1:19 mark).
10. Instalace klávesnice: Mount the control keypad to the underside of the desktop in a convenient location using screws (1:22 mark).
11. Instalace háčků: Attach the accessory hooks to the underside of the desktop as desired (1:25 mark).
12. Připojit kabely: Connect all necessary power and control cables as shown in the video (1:30 mark). Ensure connections are secure and cables are managed to prevent interference with movement.

Once assembly is complete, carefully flip the desk upright. Ensure it is stable before placing any items on it.

4. Návod k obsluze

Your FLEXISPOT EN1 desk features smooth electric height adjustment and convenient memory presets for personalized comfort.

Nastavení výšky

• Zvedněte stůl: Stiskněte a podržte Nahoru (^) button on the control panel to raise the desk to your desired standing height.
• Spodní stůl: Stiskněte a podržte Dolů (v) button on the control panel to lower the desk to your desired sitting height.
• The desk height can be adjusted smoothly and quietly between approximately 29.1 inches (sitting) and 46.7 inches (standing), including the 1-inch tabletop thickness.

Image: Programmable Control Panel with LED display and memory presets.

Předvolby paměti

The control panel features four memory preset buttons (1, 2, 3, 4) to save and recall your preferred sitting and standing heights.

1. Uložení předvolby: Adjust the desk to your desired height using the Up/Down buttons. Press the M. button (or similar memory set button, often labeled with an 'i' or 'f' followed by a number) once, then immediately press one of the number buttons (1, 2, 3, or 4) to save the current height to that preset. The display will confirm the setting.
2. Vyvolání předvolby: Jednoduše stiskněte odpovídající číselné tlačítko (1, 2, 3 nebo 4). Stůl se automaticky přesune do uložené výšky.

Konec produktuview Video

Video: Upgrade Your Space with FLEXISPOT One-Piece Desk. This video highlights the desk's features, including its quiet operation and seamless height transitions.

5. Údržba

Pravidelná údržba zajistí dlouhou životnost a optimální výkon vašeho stolu.

• Čištění: Otřete pracovní plochu a rám měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, které by mohly poškodit povrchovou úpravu.
• Správa kabelů: Pravidelně kontrolujte, zda jsou všechny kabely bezpečně upevněny a nepřekážejí pohybu stolu.
• Utáhněte upevňovací prvky: Over time, some fasteners may loosen. Periodically check and tighten all screws and bolts to maintain stability.
• Hmotnostní limit: Always adhere to the 176 lbs (80 kg) weight limit to prevent damage to the motor and frame.

6. Řešení problémů

Pokud narazíte na jakékoli problémy se stolem, podívejte se na následující běžné tipy pro řešení problémů:

• Stůl se nehýbe:
  • Ensure the power cable is securely plugged into both the desk and a working wall outlet.
  • Check for any obstructions under or around the desk that might be preventing movement.
  • Perform a reset: Unplug the desk for 10 seconds, then plug it back in. Press and hold the 'Down' button until the desk reaches its lowest point and slightly rises, indicating a successful reset.
• Nerovnoměrný pohyb:
  • Verify that the desk is placed on a level surface.
  • Check that all assembly screws, especially those on the crossbeam and lifting columns, are securely tightened.
• Kódy chyb:
  • If an error code appears on the display, refer to the full troubleshooting guide on the FLEXISPOT webwebu nebo kontaktujte zákaznickou podporu.

For persistent issues, please contact FLEXISPOT customer support.

7. Specifikace

Diagram rozměrů

Image: Visual representation of the desk's desktop size and adjustable frame height.

8. Informace o záruce

Your FLEXISPOT EN1 Electric Stand Up Desk comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your package or visit the official FLEXISPOT webmísto.

9. Zákaznická podpora

If you have any questions, require assistance with assembly, or need troubleshooting support, please do not hesitate to contact FLEXISPOT customer service.

• Online podpora: Visit the official FLEXISPOT website for FAQs, product guides, and contact forms.
• E-mailová podpora: Refer to your product packaging or the FLEXISPOT webwebu, kde najdete příslušnou e-mailovou adresu zákaznického servisu.
• Telefonická podpora: Contact numbers can typically be found on the FLEXISPOT webwebu nebo v dokumentaci k vašemu produktu.