Návod k obsluze laserového gravírovacího stroje SCULPFUN S30

1. Úvod

The SCULPFUN S30 is a 5W diode laser engraver and cutter designed for precision work on a variety of materials. It features an automatic air assist system, an industrial-grade X-axis guide rail, and a robust frame, making it suitable for both engraving and cutting tasks. This manual provides essential information for the safe and effective operation of your SCULPFUN S30.

Figure 1.1: SCULPFUN S30 Laser Engraver with examples of engraved and cut materials.

2. Bezpečnostní pokyny

Operating a laser engraver involves inherent risks. Adhere strictly to the following safety precautions to prevent injury or damage.

• Ochrana očí: Always wear the provided laser protective eyewear when the machine is in operation. The laser is Class IV and can cause severe eye damage.
• Bezobslužný provoz: Do not leave the machine running unattended. Constant supervision is required during operation.
• Větrání: Stroj používejte v dobře větraném prostoru, aby se rozptýlily výpary a kouř vznikající během gravírování a řezání.
• Bezpečnost materiálu: Only engrave or cut materials specified as safe. Avoid materials that produce toxic fumes or are highly flammable.
• Nouzové zastavení: Seznamte se s umístěním a obsluhou tlačítka nouzového zastavení.
• Děti a domácí mazlíčci: Udržujte děti a domácí zvířata mimo provozní oblast.

Figure 2.1: The limit switch mechanism, featuring a caution label advising against unattended operation.

3. Vlastnosti produktu

The SCULPFUN S30 incorporates several advanced features for enhanced performance and user experience:

• Automatický systém podpory vzduchu: Equipped with a 32-bit automatic air assist motherboard and an air pump, intelligently controlled via LightBurn software (M8 button). This system significantly improves cutting efficiency and cleanliness by blowing away debris.
• Vysokotlaká tryska s tlakovým vzduchem: Generates a high-pressure airflow of 30L/min, accelerating cutting speed by over 5 times compared to operations without air assist. Ensures clean cut surfaces.
• Průmyslová vodicí lišta osy X: Features a precision industrial-grade X-axis guide rail, ensuring stable and accurate engraving and cutting without ripple patterns, even on small details.
• Sturdy and Durable Frame: Constructed from high-strength aluminum alloy, the frame can withstand up to 50KG of weight, ensuring long-term durability and precision. The modular design allows for future laser upgrades.
• Všestranná kompatibilita materiálů: Capable of engraving wood, MDF, zigzag, cardboard, plastic, rust, circuit board, aluminum oxide, 304 stainless steel, ceramics, and dark stone. It can cut black acrylic sheet, cardboard, non-woven fabric, bamboo sheet, leather, and certain plastic panels.

Figure 3.1: The automatic air pump, a key component for efficient cutting and engraving.

Figure 3.2: Visual comparison demonstrating the benefits of automatic air assist for clean edges and cuts.

4. Obsah balení

Ověřte, zda jsou v balení přítomny všechny níže uvedené komponenty:

• SCULPFUN S30 Laser Engraver Frame Components
• Laserový modul (5W)
• Automatic Air Assist Pump
• Air Nozzle and Tubing
• 32-bit Air Assist Mainboard
• Limit Switches (X and Y axis)
• Napájecí adaptér a kabel
• USB kabel
• Laser Protective Eyewear
• Sloupec s pevným fokusem
• SampMateriály pro testování
• Nástroje pro montáž
• Uživatelská příručka (tento dokument)

Obrázek 4.1: Přesview of all components included in the SCULPFUN S30 package.

5. Montážní návod

Follow these steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly guide provided in the box for visual instructions.

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a zkontrolujte je podle seznamu obsahu balení.
2. Sestavte rám: Connect the aluminum alloy frame components according to the diagrams in the separate assembly guide. Ensure all screws are tightened securely.
3. Install X-Axis Guide Rail: Mount the X-axis guide rail onto the frame, ensuring smooth movement.
4. Attach Laser Module: Secure the laser module to the gantry. Connect the necessary cables.
5. Install Air Assist System: Connect the air pump to the air nozzle and route the tubing. Ensure the nozzle is correctly positioned near the laser output.
6. Mount Limit Switches: Install the X and Y axis limit switches. These are crucial for homing and precise positioning. Users can choose to install or not install them based on their needs, but installation is recommended for repeated positioning accuracy.
7. Connect Mainboard: Connect all motor, laser, and limit switch cables to the 32-bit air assist mainboard.
8. Připojení napájení: Připojte napájecí adaptér k zařízení a poté do elektrické zásuvky.

6. Instalace a připojení softwaru

The SCULPFUN S30 supports various operating software. LightBurn is recommended for full functionality, especially for automatic air assist control.

• Podporovaný software: LightBurn (recommended for M8 air assist control), LaserGRBL, Benbox, GrblController, LiteFire.
• Operační systémy: Supports Windows and MAC systems.
• File Formáty: Compatible with NC, BMP, JPG, PNG, DXF, and other image formats.

6.1. Instalace softwaru

1. Stáhnout software: Obtain the latest version of LightBurn or LaserGRBL from their official webstránky.
2. Nainstalujte ovladače: Follow the software's instructions to install any necessary drivers for your operating system.
3. Spustit software: Open the installed software.

6.2. Connecting the Engraver

1. Zapnutí: Ensure the engraver is powered on.
2. Připojte USB: Připojte gravírku k počítači pomocí dodaného kabelu USB.
3. Výběr portu: In the software, select the correct COM port for your engraver.
4. Počáteční nastavení: Follow any on-screen prompts within the software for initial device setup and configuration.

Figure 6.1: The 32-bit air assist mainboard, supporting automatic air assist control and future wireless upgrades.

7. Základní obsluha

This section outlines the fundamental steps for engraving and cutting.

7.1. Material Placement

Place the material to be engraved or cut flat on the working surface. Ensure it is stable and does not move during operation.

7.2. Focusing the Laser

The S30 uses a fixed focus column and sliding device for focusing. Position the laser module over the material and adjust its height until the laser beam is at its smallest point on the material surface. This ensures optimal engraving and cutting performance.

Figure 7.1: Illustration of the 0.06 x 0.06 mm laser focus and beam shaping technology.

7.3. Preparing Your Design

Import your design into the software (e.g., LightBurn). Adjust parameters such as power, speed, and number of passes according to the material type and desired outcome. For automatic air assist, ensure the M8 command is enabled in LightBurn for cutting operations.

7.4. Uvedení do provozu

Once the design is prepared and the laser is focused, initiate the engraving or cutting process from the software. Monitor the machine closely throughout the operation.

8. Údržba

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S30.

• Čistá laserová čočka: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam quality.
• Vyčistit trosky: Remove any accumulated dust, debris, or material residue from the machine's frame, rails, and working area after each use.
• Promazání kolejnic: Apply a small amount of lubricant to the X and Y axis guide rails periodically to ensure smooth movement.
• Zkontrolujte připojení: Ensure all electrical and air assist connections are secure and free from damage.
• Filtr vzduchového čerpadla: If applicable, check and clean or replace the air pump filter to maintain optimal airflow.

9. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat.

10. Technické specifikace

11. Záruka a podpora

For warranty information and technical support, please refer to the documentation included with your product or visit the official SCULPFUN webUschovejte si účtenku jako doklad o koupi pro případ reklamace.