NYXI Joypad Wireless Controller for Nintendo Switch/Lite/OLED

1. Úvod

Thank you for choosing the NYXI Joypad Wireless Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller for an optimal gaming experience on Nintendo Switch, Switch Lite, and Switch OLED consoles.

2. Obsah balení

Po vybalení zkontrolujte obsah balení:

• NYXI Joypad Wireless Controller (Left & Right)
• Nabíjecí kabel USB-C
• Uživatelská příručka

3. Rozložení ovladače

Familiarize yourself with the buttons and features of your NYXI Joypad Controller:

• Levý joypad: Left Analog Stick, D-Pad, L/ZL Buttons, Capture Button, Minus (-) Button, Programmable Button (M1)
• Pravý joypad: Right Analog Stick, A/B/X/Y Buttons, R/ZR Buttons, Home Button, Plus (+) Button, Programmable Button (M2)
• Both Joypads: RGB LED Indicators, USB-C Charging Port, Sync Button

Note: Specific button functions may vary depending on the game.

4. Nastavení

4.1 Počáteční nabíjení

Before first use, fully charge the controllers. Connect the USB-C charging cable to the charging port on each joypad and then to a USB power source (e.g., Nintendo Switch dock, USB wall adapter). The RGB LED indicators will show charging status and turn off when fully charged.

4.2 Párování s konzolí Nintendo Switch

There are two methods to pair your NYXI Joypad controllers with your Nintendo Switch console:

1. Method 1: Direct Attachment

   Slide the left and right Joypads onto the side rails of your Nintendo Switch console until you hear a click. The console will automatically detect and pair the controllers. Once paired, you can detach them for wireless play.
2. Method 2: Wireless Pairing
   • V nabídce HOME na konzoli Nintendo Switch vyberte „Ovladače“ > „Změnit úchop/pořadí“.
   • On each NYXI Joypad, press and hold the small Tlačítko synchronizace (usually located on the side or bottom) for a few seconds until the RGB LED indicators start flashing rapidly.
   • The console will detect the controllers. Once paired, the LED indicators will light up steadily.

Ensure your Nintendo Switch console is updated to the latest system software version for optimal compatibility.

5. Návod k obsluze

5.1 Wake Up Function

When the console is in sleep mode, press the Tlačítko Domů on the right Joypad to wake up the Nintendo Switch console wirelessly.

5.2 Funkce Turbo

The Turbo function allows for rapid, continuous input of a button press. To activate:

1. Press and hold the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR).
2. While holding the action button, press the Tlačítko Turbo (refer to controller diagram if available, or typically a dedicated button).
3. Release both buttons. The action button will now continuously input until Turbo is deactivated.

To deactivate Turbo, repeat the process: hold the action button and press the Turbo Button again.

5.3 RGB LED Adjustment

The NYXI Joypads feature adjustable RGB LED lighting. Specific controls for changing colors or modes are usually found by pressing a dedicated LED button or a combination of buttons (e.g., L3 + R3 + A). Refer to the quick start guide or product packaging for exact button combinations.

5.4 Adjustable Vibration

The vibration intensity can be adjusted to your preference. This is typically done through a button combination (e.g., Turbo + D-Pad Up/Down) or via the Nintendo Switch system settings under "Controllers and Sensors".

5.5 Programmable Buttons (M1/M2)

The M1 (left Joypad) and M2 (right Joypad) buttons can be programmed to mimic other button inputs or sequences. Follow these general steps to program them:

1. Stiskněte a podržte Tlačítko programu (often a small button on the back or side, or a combination like SET + M1/M2) until an indicator light flashes.
2. Press the button or sequence of buttons you wish to assign to M1/M2.
3. Press the M1 or M2 button to confirm the assignment. The indicator light will stop flashing.

To clear a programmed button, repeat the programming process without inputting any new buttons, or refer to specific instructions for a reset function.

6. Údržba

6.1 Čištění

To clean your controllers, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or solvents. Ensure no liquid enters the controller's openings.

6.2 Skladování

Store the controllers in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for an extended period, ensure they are fully charged to preserve battery life.

7. Řešení problémů

7.1 Controller Not Pairing

• Ensure the controllers are sufficiently charged.
• Verify the Nintendo Switch console is updated to the latest system software.
• Try re-pairing using both direct attachment and wireless pairing methods.
• Restartujte konzoli Nintendo Switch.
• Reset the controllers by pressing the small reset button (if available, often a pinhole) or holding the Sync button for an extended period.

7.2 Vstupní zpoždění nebo přerušení

• Ensure there are no obstructions between the controllers and the console.
• Move closer to the console.
• Zkontrolujte další bezdrátová zařízení, která by mohla způsobovat rušení.
• Ensure controllers are fully charged.

7.3 Tlačítka nereagují

• Check if the button is stuck or obstructed.
• Test the button in the Nintendo Switch "Test Input Devices" settings.
• Proveďte reset řídicí jednotky.

8. Specifikace

9. Záruka a podpora

NYXI products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official NYXI webUschovejte si doklad o koupi pro případ reklamace.

Upozorňujeme, že záruční podmínky se mohou lišit v závislosti na regionu a prodejci.