Shuttle XPC Slim DH610 Barebone PC Instruction Manual

1. Úvod

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Shuttle XPC Slim DH610 Barebone PC. The DH610 is a compact and versatile barebone system designed to support Intel 12th and 13th Generation LGA1700 processors, offering robust performance for various applications including office, digital signage, and kiosks.

2. Bezpečnostní informace

Přečtěte si prosím a dodržujte tyto bezpečnostní pokyny, abyste předešli poškození zařízení nebo zranění:

• Always disconnect the power cord before performing any installation or maintenance.
• Ensure the system is placed on a stable, flat surface with adequate ventilation.
• Nevystavujte zařízení vlhkosti, extrémním teplotám ani přímému slunečnímu záření.
• Only use the power adapter provided or an approved equivalent.
• Refer to qualified service personnel for any repairs not covered in this manual.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Shuttle XPC Slim DH610 Barebone PC Unit
• Montážní sada VESA
• Napájecí adaptér a kabel
• Accessory Pack (screws, cables, etc.)
• Stručný průvodce (pokud je součástí dodávky)

4. Nastavení a instalace

The Shuttle DH610 is a barebone system, requiring the installation of a CPU, RAM, and storage devices before operation.

4.1. Opening the Chassis

Carefully remove the chassis cover to access the internal components. Typically, this involves unscrewing a few screws on the rear or sides of the unit and sliding the cover off.

Image: The Shuttle XPC Slim DH610 with its top cover removed, showing the internal layout including cooling fans and the motherboard.

4.2. Instalace procesoru

The DH610 supports Intel 12th/13th Generation Alder Lake-S LGA1700 processors with a maximum TDP of 65W. Ensure your chosen CPU has integrated graphics, as the system does not support F-series processors without integrated graphics or K-series processors.

1. Otevřete páčku patice procesoru a sejměte ochranný kryt.
2. Carefully align the CPU with the socket, matching the triangular markers.
3. Opatrně vložte procesor do patice, aniž byste na něj tlačili.
4. Zavřete páčku patice, abyste zajistili procesor.
5. Nainstalujte chladič CPU podle pokynů výrobce.

Obrázek: Podrobný view of the Shuttle DH610 motherboard, highlighting the LGA1700 CPU socket, RAM slots, and other integrated circuits.

Note: For 13th Gen Intel Processors, BIOS Version DH610000.202 or newer is required. Update BIOS if necessary after initial setup with a 12th Gen CPU or via a compatible method.

4.3. Instalace RAM

The system features two 260-pin dual-channel DDR4 SODIMM slots, supporting up to 64GB (2x 32GB) at 3200MHz. Dual-channel memory is recommended for optimal performance.

1. Locate the SODIMM slots on the motherboard.
2. Zarovnejte zářez na modulu RAM s výstupkem ve slotu.
3. Insert the module at a 45-degree angle and push down until the clips on both sides snap into place.

4.4. Instalace úložiště

The DH610 supports one 2.5-inch HDD/SSD and one M.2 2280 SSD.

1. 2.5" Drive: Mount the 2.5" HDD/SSD into the designated bay using the provided screws and connect the SATA data and power cables.
2. M.2 SSD: Insert the M.2 2280 SSD into its slot, securing it with the provided screw.

4.5. Připojení periferií

After installing internal components, reattach the chassis cover. Connect your peripherals to the available ports:

• Zobrazit: Connect your monitor(s) to the HDMI 2.0b port or one of the two DisplayPort outputs. The system supports up to three 4K UHD displays.
• Zařízení USB: Use the four USB 3.2 Gen1 ports (including one Type-C) and four USB 2.0 ports for keyboard, mouse, and other USB devices.
• Síť: Connect to your network using either of the two Gigabit Ethernet LAN ports (Intel 2.5GbE + Intel 1GbE).
• Serial Devices: Utilize the two RS232 COM ports for compatible devices.
• Zvuk: Connect headphones or a microphone to the front audio jacks.

Image: The front panel of the Shuttle DH610, featuring the power button, USB 3.2 Gen1 ports (one Type-C), and audio input/output jacks.

Image: The rear panel of the Shuttle DH610, displaying the DC-IN power input, HDMI, two DisplayPort outputs, two LAN ports, USB ports, and two COM ports.

4.6. Připojení napájení

Connect the power adapter to the DC-IN port on the rear of the unit, then plug the power cord into an electrical outlet.

5. Návod k obsluze

5.1. Zapnutí/vypnutí

• Zapnutí: Stiskněte tlačítko napájení umístěné na předním panelu.
• Vypnout: Perform a graceful shutdown through your operating system. Alternatively, press and hold the power button for 4-5 seconds for a forced shutdown (use only when necessary).

5.2. Instalace operačního systému

The DH610 is compatible with Windows 11/10 (64-bit) and Linux (64-bit) operating systems. Follow the standard installation procedures for your chosen OS. Ensure all necessary drivers are installed for optimal performance, which can typically be found on the Shuttle support webmísto.

5.3. Přístup k BIOSu/UEFI

Chcete-li spustit nástroj pro nastavení systému BIOS/UEFI, stiskněte Vymazat or F2 key repeatedly during system startup. This allows configuration of boot options, system settings, and hardware parameters.

6. Údržba

6.1. Čištění

Regularly clean the exterior of the unit with a soft, dry cloth. Use compressed air to clear dust from ventilation openings to ensure proper airflow and prevent overheating. Do not use liquid cleaners directly on the device.

6.2. Aktualizace BIOSu

Periodically check the Shuttle website for BIOS updates. BIOS updates can improve system stability, add support for new hardware (like 13th Gen Intel CPUs), and fix bugs. Follow the instructions provided with the BIOS update package carefully.

7. Řešení problémů

If you encounter issues with your DH610, refer to the following common problems and solutions:

• Žádný výstup na displej:
  • Ensure the monitor is powered on and correctly connected to the HDMI or DisplayPort.
  • Verify that the CPU has integrated graphics and that the display cable is connected to the motherboard's video output, not a discrete graphics card (if applicable).
  • Zkuste jiný kabel displeje nebo monitor.
• Systém se nezapíná:
  • Check that the power adapter is securely connected to both the unit and the electrical outlet.
  • Ensure the CPU and RAM are correctly installed and seated.
  • Otestujte zásuvku pomocí jiného zařízení.
• 13th Gen CPU Not Recognized:
  • The system requires BIOS Version DH610000.202 or newer for 13th Gen Intel processors. If you have an older BIOS, you may need to install a 12th Gen CPU first to update the BIOS.
• Přehřátí systému:
  • Ensure the chassis ventilation holes are not obstructed.
  • Clean any dust accumulation from the internal fans and heatsinks.
  • Verify the CPU cooler is properly installed and making good contact with the CPU.

8. Specifikace

9. Záruka a podpora

9.1. Záruka výrobce

The Shuttle XPC Slim DH610 Barebone PC comes with a 3-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. Technická podpora

For technical assistance, driver downloads, BIOS updates, or further troubleshooting not covered in this manual, please visit the official Shuttle website or contact Shuttle customer support. Free lifetime technical support is typically provided by the manufacturer.

Pro více informací navštivte: www.shuttle.com